• Korean Journal of Food Science and Technology
• /
• v.16 no.1
• /
• pp.108-112
• /
• 1984

The sorption characteristics of red pepper powder stored at various relative humidity and temperature were studied. At low relative humidity below RH 57%, the sorption equilibrium was easily attained, whereas at higher relative humidity above RH 75%, the powder was browned by higher equilibrium moisture content. The moisture content of monolayer value for the powder was ranging from 11.32% to 12.13% with temperature. First order regression equation of equilibrium moisture content for relative humidity was determined.

• Journal of the Korean Chemical Society
• /
• v.30 no.4
• /
• pp.359-368
• /
• 1986

Solvent extraction equilibria of alkali metal cation with crown ether (DC18C6, DC24C8) and HDEHP have been studied. The extraction equilibrium constants increase in the order of, in the DC18C6 system, $Na^+, and in the DC24C8 system, $Rb^+. The species extracted to organic phase are $M_1(crown ether)_1\;(HDEHP)_1$. The magnitude of extraction equilibrium constant is determined by the distribution ratio of crown ether between organic and aqueous phase, and stability constant of crown ether-alkali metal complex.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.685-694
• /
• 2018

In this paper, we designed and fabricated the frequency mixer, which is the core parts of high frequency head in Ku-band tracking radar. To overcome the problem of single-ended and single-balanced resistive structure, we designed the fine-line structure with balanced mixer, to generate IF signal without distortion in L-band, after receiving the RF signal of the Ku-band. The prototype mixer showed a Noise Figure Max of 6.823dB, Gain of 4.1598~4.676dB and Band Pass of 61MHz in 5 Ku-band samples frequency.

• Applied Chemistry for Engineering
• /
• v.4 no.4
• /
• pp.746-752
• /
• 1993

Quantitative measurements have been made by using equilibrium dialysis techniques on the extent of complexation between PCB and dissoved humic acid(HA). This research investigates the effectiveness of activated carbon adsorption for the removal of PCB from organic free water and humid acid background solution by using bench-scale equilibrium and rate tests. It was found that the extent of complexation depended on the pH, calcium concentration, ionic strength, and the concentration of humic acid. When HA was present, activated carbon capacity was greatly reduced due to complexation and competitive adsorption effects and the adsorption characteristics became complicated by the presence of various species such as the unassociated HA, PCB, and PCB-HA complexes.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.4
• /
• pp.102-109
• /
• 2015

The methodology to calculate loads on the bearings of the gas-turbine engine is presented for design of high-speed bearing. Firstly, the loads on the bearings are formulated according to the force and moment equilibrium with gyroscopic moment in three-dimensional space. Afterward, operating loading conditions of the engine are presented by applying the Joint Service Specification Guide, and magnitudes of transient and steady bearing loads are estimated based on the operating conditions. The calculated loading conditions of the bearings will be used for the essential design boundaries for the detail structural design and rig test.

• Journal of Korea Foundry Society
• /
• v.23 no.3
• /
• pp.147-152
• /
• 2003

질소 용해도가 낮은 ${\delta}$상으로 응고가 시작되는 16Cr-3Ni 계 스테인리스강의 응고시 질소기포 형성에 미치는 질소 함량과 냉각속도의 영향이 조사되었으며 이를 기반으로 질소 기포 결함이 발생하는 임계 질소 함량을 예측하는 방법을 제시하였다. 질소함량의 증가는 질소 기포 결함을 증가시켰으며, 냉각속도의 증가는 질소기포결함의 형성을 다소 억제 할 수 있는 것으로 조사되었다. 실험적으로 구한 Fe-16Cr-3Ni-9Mn 합금의 임계 질소 함량은 0.19wt%였으며, 임계 질소 압력은 평형응고로 가정한 경우 1.27atm, Scheil 응고로 가정한 경우에는 1.23atm으로 계산되었다. 질소 용해도를 증가시킬 수 있는 Mn 함량의 변화에 따른 임계 질소 함량의 변화를 예측하기 위하여 계산된 임계 질소 압력을 Fe-16Cr-3Ni-11Mn 합금에 적용하였으며 이를 통해 얻은 임계 질소 함량은 평형응고로 가정한 경우 0.25wt%, Scheil 응고로 가정한 경우에는 0.24wt% 로 예측되었다. 예측 결과의 타당성을 확인하기 위하여 Fe-16Cr-3Ni-11Mn 합금의 실험 결과와 비교하였으며, 일치하는 결과가 얻어졌다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.4
• /
• pp.48-53
• /
• 2001

A three-stage low noise amplifier(LNA) for the Base-station of the IMT-2000 is designed and implemented. In the first stage, a GaAs HJt-FET which has good noise characteristics is made use of. Monolithic microwave integrated circuits(MMICS) are used in the second and the third stage to achieve both the high gain and high output power. Although the balanced amplifier is used to reduce the input VSWR, it is done only in the first stage because we have to minimize the noise figure attributed to the phase difference of the balanced amplifier. It is shown that the implemented LNA has the gai over 39.74dB, the gain flatness less than ±0.4dB, the noise figure below 0.97dB, input and output VSWRs less than 1.2, and OIP₃(output third order intercept point) of 38.17dBm in the operating frequency range.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.12
• /
• pp.1335-1340
• /
• 2003

In this paper, a single balanced diode Mixer for the homodyne FMCW radar to detect distance and velocity of a vehicle target is designed and implemented using a microstrip line and two schottky barrier beam lead diodes. This mixer is optimally designed to have less a conversion loss within the 100 MHz bandwidth with a little LO injection power and a higher LO isolation as soon as possible through the embedded electrical length of microsrtrip line placed between the coupler and diode matching, considering together LO matching condition. The measured results show 6 dB of conversion loss, 23 dB LO/RF isolation and 3 dBm of input 1l dB, respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.6
• /
• pp.589-598
• /
• 2000

The vapor-liquid equilibrium and miscibility measurement apparatus was developed and used to obtain data for refrigerant/oil mixture. The vapor-liquid equilibrium and miscibility data for R-410a/POE32 and R-410A/POE46 oil mixtures are obtained over the temperature range from -20 to $60^{\circ}C\;with\;10^{\circ}C$ intervals and the oil concentration range from 0 to 90 wt%. Using the experimental data, an empirical model is developed to predict the temperature-pressure-concentration relations for R-410A/POE oil mixtures at equilibrium. In the R-410A/POE32 oil mixture, the average root-mean-square deviation between measured data and calculated results from the empirical model is 2.00% and in the R-410a/POE46 oil mixture, that is 3.69%. Flory-Huggins theory is also used to predict refrigerant/oil mixture behavior. Miscibility for R-410A/POE32 oil mixture was observed all over the experimental conditions. Immiscibility for R-410A/POE46 oil mixture was observed at the low oil concentrations(10~30 wt%).

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.201-203
• /
• 2007

본 논문에서는, 연료전지 시스템의 기계적 주변장치 (MBOP)와 전기적 주변장치 (EBOP)의 최적 설계를 위해서 PEMFC 스택을 전기화학반응을 기초로 모델링한다. 모델링을 위해 기본적인 PEMFC의 구조와 동작 원리를 설명한다. 연료전지의 이론적 최고 전압인 평형전위를 깁스 자유에너지와 네른스트 방정식으로 유도한다. 전류밀도에 따른 전압 손실인 활성화, 저항, 농도 분극현상을 표현하기 위해서 수식을 유도한다. 수소가 이온화되지 못하고 산소극으로 넘어가서 발생되는 연료손실 및 내부전류와 지속적인 정역반응인 교환전류도 모델링된다. 평형전압에서 각 분극을 뺀 실제 운전 전압을 시뮬레이션하고, 유량과 압력에 따른 출력 특성을 시뮬레이션 한다. 부하변동 시 출력특성을 시뮬레이터와 실험결과로 비교한다.