• 한국주조공학회지
• /
• 제12권5호
• /
• pp.378-389
• /
• 1992

A numerical model based on the SOLA-VOF method, which can calculate the transient free-surface configuration of the melt, has been developed in order to analyze melt flow in the investment mold. The computational results were compared with experimental results obtained from pure aluminum investment casting. Heat transfer analysis, with and without consideration of melt flow effect has been performed. It can be concluded that analysis of melt flow in the investment mold, provides the optimum conditions for gating design. It also enables more precise solidification simulation, since heat loss, while filling the thin and complex investment mold, plays an important role in determining the solidification sequence.

• 한국주조공학회지
• /
• 제24권5호
• /
• pp.295-303
• /
• 2004

The effects of three minor elements, S, Ce and Bi, on the inoculation ability and fading behavior of 1.0 wt%Ba-Fe-Si were investigated through thermal analysis. The performance of 1.0 wt%Ba-Fe-Si inoculant was better and more consistant at the high temperature range of $1,450{\sim}1,500^{\circ}C$ than that of low one of $1,300{\sim}1,400^{\circ}C$. That was improved with individual addition of three minor elements. The optimum amount of addition was 1.0% of the weight of inoculant added, respectively. That was improved also by the simultaneous addition of two or three kinds of minor elements. Even though worse with the addition of two kinds of them simultaneously than with individual addition, that was improved with the simultaneous addition of all three kinds over that with the individual one.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.48-48
• /
• 2000

진공부품에 사용되고 있는 재료는 여러 가지 있으나 회주철품은 진동 감쇄 및 흡진성이 우수하여 소음 발생이 적고, 조직 중에 흑연이 존재하므로 주강에 비하여 자기윤활작용이 있으며, 말차계수가 적어 마찰면의 면입이 높은 경우에도 소손 등의 이상 마멸현상이 적어 진공펌프, 내연기관, 공작 기계등과 같이 강인성과 내마멸성을 요구하는 부품에 많이 이용되어 왔다, 이 회주철도 대별하면 여러 종류가 있고, 진공 펌프용 재질은 주로 회주철 중에 ASTM A형으로 도면에 명기되어 있다. 따라서 본 제품을 개발하는 과정중에 연속 주조법으로 제조된 ASTM형이 기존의 재료에 비하여 내기밀성, 내마면성, 내피로성 및 기계적 성질등이 우수함을 확인하여본 재질로 개발하였고, 시험한 연구 결과를 발표하고자 한다. 실험은 ASTM A형으로 주조하기 위하여 용해된 용탕을 사형 주형에서 GC200으로 주조하고, ASTM D형은 D사의 연속 주조기에서 직경 30mm로 주조하였다. 이와 같이 주조된 사료를 일정한 크기로 시험편을 만들어 인장 강도, 경도, 피로한도, 피로성, 절삭성, 내유압성, 소입성과 내마멸성을 시험하였다.

• 소성∙가공
• /
• 제13권6호
• /
• pp.522-527
• /
• 2004

Permalloys were successfully fabricated by melt drag casting in the present study, and their microstructure and consequent magnetic properties have been investigated as a function of Si content. In order to understand the relationship between magnetic properties and Si content, microstructure and texture were observed and phase analysis were performed by TEM. The effective permeability went through a maximum value at $2\%$ Si and then decreased with increasing Si content. Increasing Si content enlarged grain size, which resulted in improvement of permeability. However, over-added Si caused the formation of $Ni_3Fe$ order phase so that $5\%$ Si added permalloys had the smallest permeability.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.475-478
• /
• 2005

Permalloys were successfully fabricated by melt drag casting in the present study, and their variation of microstructure and consequent magnetic properties were investigated as a function of Si contents and annealing temperature. The increases in Si content and annealing temperature resulted in the increases of grain size and amount of $Ni_3Fe$ ordered phase. Both the grain size and $Ni_3Fe$ ordered phase controlled by Si and annealing temperature had a important role on permeability of permalloys.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.620-625
• /
• 1995

Finite element analysis tool was developed to analyze the casting process. Generally, casting processes consists of mold filling and solifification. In order to investigate the effects of process variables and to predict the defects, both filling and solidiffication process were simulated simultaneously. At filling process, especiallywe consider thermal coupling to investigate thermal history of material during the filling stage. And thermal condition at the final stage of filling is used as the initial conditions in a solidification process for the exact simulation of the actual casting processes. At mold filling process, Lagrangian-type finite element method with automatic remashing scheme was used to find the material flow. To avoid numerical instability in low viscous fluid, a perturbation method with artificial viscosity is adopted. At solififfication process, enthalpy-based finite element method was used to solve the heat transfer problem with phase change. And elastic stress analysis has been performed to predict the thermal residual stress. Through the FE analysis, solidiffication time, position of solidus line, liquidus line and thermal residual stress are studied. Finite element tools developed in this study will be used process design of casting process and maybe basic structure for total CAE system of castigs which will be constructed afterward.

• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.116-121
• /
• 2012

Equilibria between Mn-Si melts and $MnO-SiO_2$ slags were studied at 1673 K and 1773 K in MnO crucibles to accurately determine the thermodynamic property of the Mn-Si melts. The Unified Interaction Parameter Formalism (UIPF) was used to describe the thermodynamic property of the Mn-Si liquid. Using the UIPF, the experimental results obtained in the present study were thermodynamically analyzed to determine the activity coefficient of Si at infinite dilution and the 1st- and 2nd-order self-interaction parameters of Si in the Mn-Si melts.

• 대한금속재료학회지
• /
• 제48권3호
• /
• pp.241-247
• /
• 2010

In order to develop the vacuum distillation process of magnesium alloy scrap, a fundamental study on the evaporation behavior of magnesium alloy (AM50) scrap melt was carried out. Melt temperature, pressure, reaction time, and initial specific surface area of melt were considered as experimental variables. The evaporation rate of magnesium increased with the increase of melt temperature and initial specific surface area of melt, and with the decrease of the pressure. The activation energy of magnesium evaporation reaction calculated by an Arrhenius plot decreased with the decrease of the pressure and with the increase of the initial specific surface area of melt. An empirical equation was derived for the evaporation rate of magnesium from AM50 alloy melt.

• 한국주조공학회지
• /
• 제43권5호
• /
• pp.256-259
• /
• 2023

• Composites Research
• /
• 제25권4호
• /
• pp.93-97
• /
• 2012

본 연구에서는 액상가압공정을 이용하여 탄소나노섬유(carbon nano fiber, CNF)를 강화재로 하는 AZ91 마그네슘 복합재를 제조하였다. CNF의 분산성 및 마그네슘 합금 용탕과의 젖음성을 향상시키고자 CNF를 마이크로 크기의 실리콘 카바이드 입자(silicon carbide particle, $SiC_p$)와 혼합하였다. 또한, CNF와 $SiC_p$의 혼합분말에 무전해도금법으로 니켈을 코팅하였다. 액상가압공정에서 AZ91 용탕은 무처리된 CNF, CNF와 $SiC_p$의 혼합분말(CNF+$SiC_p$), 니켈 코팅된 CNF와 $SiC_p$의 복합분말((CNF+$SiC_p$)/Ni)과 같이 세 종류의 강화재로 정수압에 의해 함침하여 복합재를 제조하였다. 무처리된 CNF 강화 복합재료에서는 일부 CNF 응집체가 관찰되었으나 CNF+$SiC_p$ 및 (CNF+$SiC_p$)/Ni 강화 복합재에서는 CNF가 기지재 내에 균일하게 분산되었음을 확인하였다. 압축시험결과, CNF+$SiC_p$ 및 (CNF+$SiC_p$)/Ni 강화 복합재의 압축강도가 무처리된 CNF 강화 복합재보다 각각 38%와 28% 향상되었다.