• Analytical Science and Technology
• /
• v.24 no.5
• /
• pp.378-386
• /
• 2011

The goal of this study is to understand the influence of temperature on phosphorus release rate from soil into water. As the temperature increases, $PO_4$-P reaches equilibrium more quickly and the equilibrium concentration increases, and thus the $PO_4$-P concentration increases, and pH decreases. The $PO_4$-P concentration affects pH. $PO_4$-P released from turbidity is not adsorbed onto the turbidity. $PO_4$-P was independent on the turbidity and yet $PO_4$-P was steadily increasing. However, $PO_4$-P was dependent upon the turbidity concentration as the turbidity releases $PO_4$-P. The total phosphorous (T-P) and turbidity were directly linked because T-P changed with the turbidity. T-P includes the $PO_4$-P content of water and the phosphorus content of the turbidity. As the temperature decreases, density of water increases, and the precipitation of turbidity decreases, resulting in an increases in T-P concentration. As the temperature increases, the T-P concentration decreases, but the PO4-P release rate from turbidity increases. At the same time, even at different temperatures, the T-P concentrations of the samples were about the same. When the lake gets deepened, the water temperature decreases, hence, the phosphorus release rate from soil into water was decreased. This mechanism is of great interest because phosphorus is released from soil sediment into the lake water.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.389-397
• /
• 2001

The effect of sludge digestion on the leaching efficiency of heavy metals from sludge by bioleaching with Thiobacillus thiooxidans MET was investigated. The used sludges were a non- and anaerobically digested. The leaching efficiency of heavy metals was strongly dependent on the pH of the sludge solution rather than the sludge condition and stolid concentration. The lower the pH the more heavy metal was leached from 3.0 of pH. The sequent orders of leaching heavy metals were Zn, Cu, and Cr. Although the buffering capacity of non-digested sludge was similar to anaerobically digested sludge, the pH decrease rate of the anaerobically digested sludge solution was faster than that of the non-digested sludge solution due to the higher sulfur oxidation rate of T. thiooxidans MET in the anaerobically digested sludge. The amount of leached heavy metals from the anaerobically digested sludge showed higher than that of non-digested sludge at the same pH value. This result might be caused by the difference of the insoluble metal types, which were contained in the sludge. An increase in sludge solids concentration decreased the leaching efficiency of heavy metals in the range of solids concentration 10 g/L to 70 g/L. The optimum ratio of S° to sludge stolid was 0.1 in both the sludge. The bioleaching process of heavy metals with T. thiooxidans MET showed the disinfecting effect over 90% as well as the reduction effect in sludge weight of 20%.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.4
• /
• pp.391-405
• /
• 2020

Leaching chracteristics of Andong-dam sediment was conducted for heavy metal and nutrients. Five mixed sediment samples were prepared and leaching was conducted under aerobic and anaerobic condition for 60 days. Cd, Cu, Pb, Cr, Zn, Hg, As, Fe, Mn, phosphorus, and nitrogen were analyzed at each sampling time. The leaching rate of phosphorus was higher in anaerobic condition comparing with that of under aerobic condition. Some samples showed higher than the water-quality level IV. In case of As and Cd which showed highest contamination level in the sediment, leached concentration were 0.028 mg/L and 0.003 mg/L in maximum, respectively. The leached concentration is below than the lake water quality standard of Korea. Other heavy metals including Cu, Pb, and Cr also showed similar trend. Five step sequential extraction showed that easily extractable 1-2 step portion such as ion-exchangeable and adsorbed one was less than 10% and the most of the portion was residual. For As and Cd, the residual portion were 80% and 95% respectively indicating the risk by the heavy metal leaching into the lake for a short period was not high in comparing with the contamination levels.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.9
• /
• pp.511-516
• /
• 2015

On this study, we investigated the removal characteristics of residual chlorine and DBPs in tap-water during boiling. Also we investigated the releasing characteristics of essential minerals in infusion tea. While recent studies focused on removal mechanisms of harmful heavy metals in infusion tea, this study tried to suggest the way to drink tap-water healthier and safer by examining releasing mechanisms of essential minerals in infusion tea. As a result, residual chlorine(initial conc. was 0.7 mg/L) was all removed in 20 minutes after heating and DBPs (the sum of THMs, HAAs and CH) were removed up to 65%. 6 kinds of essential minerals (Ca, K, Na, Mg, S, P) were released from 5 kinds of infusion tea (barley tea, corn tea, brown rice tea, cassia seed tea, solomon's seal tea) on the market. In cassia seed tea, the amount of essential minerals released from tea showed the highest values, 9.6 mg/g, and brown rice tea was the lowest, 1.6 mg/g. Particularly, the released amounts of potassium, playing a key role in human body in maintaining normal blood pressure, cell metabolism and enzyme action, showed relatively high. Through this study, we got to know that essential minerals can be obtained up to 40% of recommended nutritional intake for Korean by boiling tap-water with infusion tea.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.1
• /
• pp.9-15
• /
• 2011

The first objective of this study was to investigate water pollution status of Meejae Reservoir, Kunsan, irregularly receiving river water for agricultural and recreational purposes. The second objective of the study was to compare nutrient pollution loads of three nutrient sources: sediment leaching, non-point sources and the receiving water. Water analysis results showed that eutrophication was a concern especially in summer and the calculated TSI (secchi depth), TSI (chlorophyll-a), and TSI (TP) were 53.6, 57.7 and 56.7, respectively. Although there was no significant difference in seasonal mean values of sediment T-N, sediment T-P and sediment organic content, mean differences were found for sampling points. However, T-N and T-P sediment release flux showed seasonal mean differences, while showing no mean difference for sampling points. Water T-N data proportionally correlated with sediment T-N and sediment organic content data, while no statistical correlation was found for water T-P data. Comparison of nutrient loads calculated from three sources showed that the highest T-N load was occurred from the receiving (pumped) water while T-P loads of the receiving water and sediment release flux were similar. The first solution would be considered for the receiving water to improve the water quality of Meejae Reservoir. Reduction of nutrient flux from the sediment would be then tried as the second alternative solution.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.4
• /
• pp.29-38
• /
• 2001

In this study, the fractional composition and the releasing of nutrients and metals from sediments of Boryung reservoir were investigated. Based on present study, the forms of sediment phosphorus of the four sites in reservoir were classified as adsorbed phosphorus, non apatite inorganic phosphorus(NAI-P), apatite phosphorus and residual phosphorus. Residual phosphorus showed the highest fration, NAI-P second, apatite phosphorus third and absorbed phosphorus fourth. The sedimentation rate of T-P and T-N in aerobic condition were $0.31mg/m^2{\cdot}day$ and $29mg/m^2{\cdot}day$. The sedimentation rate of T-P and T-N in anaerobic condition were $0.12mg/m^2{\cdot}day$ and $13.6mg/m^2{\cdot}day$. The releasing rate of T-P and T-N in anaerobic condition were $0.23mg/m^2{\cdot}day$ and $10.5mg/m^2{\cdot}day$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.361-367
• /
• 2010

The use of antifouling(AF) paints is the effective method for the protection of underwater structures from the development of marine fouling organisms. The ban on harmful substances in antifouling paints requires the development of new antifouling strategies although Tributyitin (TBT) compound had been used extensively as an active ingredient Alternatives should be as effective as conventional paints but have lower toxicity. In the present study, a TBT-free self-polishing (Cu SPC) AF paint containing $Cu_2O$, a Cu free SPC AF paint, and a Foul-release silicone AF paint, which were commercially available, were examined to investigate environmental erects of leakage waters employing Sebastes shlegeli and Artemia. Survival rates were inversely proportional to the concentration of leakage waters from AF paints and the acute toxicity of SPC AF paints was relatively higher than that of foul release AF paints.

• Resources Recycling
• /
• v.21 no.5
• /
• pp.88-92
• /
• 2012

We tried to measure the fixed quantity of $Ni^{2+}$ion among the metals which were eluted by distilled water from the Fly Ash Leach Liquor(FALL) with a spectrophotometric method. In addition, we researched absorbance values which had different contained quantity of $V^{3+}$ion in contrast with $Ni^{2+}$ion ppm to find out the influence of the $V^{3+}$ion existed in the FALL on the spectrophotometric fixed quantity of $Ni^{2+}$ion. As a result, when $V^{3+}$ ion has below 50% of amount of $Ni^{2+}$ion, the fixed quantity of $Ni^{2+}$ion among the FALL was able to be confirmed by spectrophotometry.

• Journal of Navigation and Port Research
• /
• v.36 no.6
• /
• pp.513-519
• /
• 2012

Understanding the behavior of pollutants in the marine environment is essential for coping with the marine pollution problems such as eutrophication. In this study, the effects of environmental parameters on phosphorus release from marine sediment to sea water were investigated. The environmental parameters such as pH in the range of 7 to 9, temperature from 10 to 20C and dissolved oxygen levels (DO) renging 0.7 to 7.0mg/L were examined. Phosphorus release data were taken from batch tests excluding biotic effects, and analyzed using a first-order kinetic model. The effects of environmental parameters were quantified using a statistical methodology. High pH, high temperature, and low DO increased phosphorus release from the sediment to sea water. pH from 7 to 9, temperature from 10 to $20^{\circ}C$, or DO from 7.0 to 0.7 mg/L magnified the equilibrium phosphorus concentration up to 2~3 times.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.264-271
• /
• 2002

Nitrogen releasing characteristics of polymer-coated urea(PCU) that made acrylic synthetic resins were studied in incubated soil, water and paddy soil. Also, their correlations and degradation patterns of coating material were tested. Releasing rate of nitrogen from PCU decreased with increasing coating rate. N001(coating rate 8.5%) and N003(coasting rater 6.3%) were low releasing amount at the early stage, whereas N005(coating rate 4.8%) was released over 80% within 20 days. Relationship of the releasing rate between incubated soil($25^{\circ}C$) and paddy soil could be described as follows : $Y=-0.0011X^2+2.2931X-50.264(R^2=0.9884)$ for N001, $Y=-0.0016X^2+1.1587X+5.5064(R^2=0.9805)$ for N003 and $Y=-0.03X^2+6.499X-243.22(R^2=0.9422)$ for N005, respectively (Y: release rate at field condition, X: experiment period). Relationship of the releasing rate between incubated water($30^{\circ}C$) and paddy soil can be described as follows : $Y=0.0011X^2+2.2601X-25.329(R^2=0.9884)$ for N001, $Y=-0.0306X^2+4.4994X-76.307(R^2=0.955)$ for N003 and $Y=-0.0164X^2+3.7764X-108.22(R^2=0.9422)$ for N005. After 150 days, coating materials of N001, N003, and N005 in incubated soil were degraded approximately 23%, 22% and 15%, respectively. Also The scanning electron microscope examination of coating material revealed that particle surface became gradually shattered with the time after the soil treatment.