Proceedings of the Korean Institute of Surface Engineering Conference
/
1998.05a
/
pp.22-22
/
1998
304 는 BWR(boiling water reactor)의 reactor 구조용 재료로 사용되고 있고, 합금 600 은 PWR(pressurized water reator) 의 증기 발생기 세관으로 쓰이고 있으며 모두 약 $280{\;}^{\circ}C$ 이상 의 원자로 냉각수에 노출되어 있다. 원자로 냉각수 분위기에서 두 합금의 공통적인 특정은 입계응력부식균열(IGSCC)에 민감한것과 IGSCC가 예민화(sensitization)와 관련이 있는 것이 다. 두 합금에서 일어나는 IGSCC는 원자력발전소의 부식피해중 가장 빈도가 높고 발생시 방사능 누출로 인하여 원전의 신뢰성을 저하시키고, 가동중단으로 인한 경제적 손실을 초 래하여 지난 20 년 동안 가장 심도있게 연구된 주제다. 304 은 크롬 탄화물의 업계 석출로 언하여 예민화된경우 IGSCC 에 민감한 반면 600 은 예민화된 경우 뿐만 아니라 용체화처리된 상태에서도 IGSCC에 민감하다. 오히려 600은 용 체화처리 후 700 C에서 15~20시간 시효처리를 하여 크롬탄화물을 업계에 석출 시커었을 때 IGSCC 저항성이 향상된다. 두 합금의 IGSCC 특정 중 큰 차이는 304는 임계균열전위 ( (critical cracking potential) 이 존재하여 부식전위(corrosion potential) 가 엄계균열전위보다 낮 은 경우 IGSCC 가 일어나지 않지만 그 반대인 경우 IGSCC 에 민감하게된다. 반면에 600 은 뚜렷한 임계균열전위가 존재하지 않고 양극 분극(anodic polarization) 뿐만 아니라 음극분극 시에도 IGSCC 가 일어난다. 이련 이유로 600의 IGSCC 가구로 피막파괴-양극용해(film rupture-anodic dissolution)외에 수소취성(hydrogen embrittlement)기구도 제안되고 었다. 원전의 냉각수는 고 순도의 물이지만 수 처리 과정과 웅축기 배관의 누수로 인한 산소, $Cu^{2+},{\;}S_xO_6{\;}^{2-}(x=3~6)$ 등이 유입되어 오염되는데 이려한 오염물질들이 수 ppm정도 소량 포함된 경우 응 력부식민감도는 상당히 증가된다. 산성분위기 흑은 산소, $Cu^{2+}$, 등이 소량 포합된 산화성 분위기 그리고 sufur oxyanion 에 오염된 고온의 물에서 600 의 IGSCC 민감도는 예민화도가 증가할 수록 민감하여 304 의 IGSCC 와 매우 유사한 거동을 보인다. 본 강연에서는 304 와 600 의 고온 물에서 일어나는 IGSCC 민감도에 미치는 환경, 예민화처리, 합금원소의 영향을 고찰하고 이에 대한 최근의 연구 동향과 방식 방법을 다룬다.
고강도 알루미늄합금은 중량이 가벼우면서 인장강도와 항복강도가 높고 가공성, 성형성이 좋아 항공기, 자동차, 선박 등 수송용 재료로 각광을 받고 있으며, 이 중 Al-Zn-Mg계(7000계) 알루미늄 합금은 용접 구조물용 경량소재로 활용범위가 높다. Al-Zn-Mg계 알루미늄 합금은 고온에서 용체화 처리후 저온으로 급냉시킨 재료를 자연시효 또는 인공시효처리를 하여 이 때 석출되는 시효 석출물에 의해 강도를 증가시킨 석출 경화형 합금이다. 그런데, 7000계열 알루미늄합금은 적절한 열처리 작업을 통해 최적의 기계적 성질이 얻어지도록 합금설계가 되어있기 때문에 구조물 제작시 용접에 의한 ARC 열을 받게 되면 열이력(thermal cycle)에 의해 모재의 미세조직이 변화하고 용접 결함이 발생하며 강도의 약화와 함께 내식성 등이 저하한다. 따라서 고강도 알루미늄합금의 용접성을 향상시키기 위해서는 용접부의 미세조직거동과 용접부에 발생하는 용접결함의 현상을 조사하여 용접용 고강도 합금에 필수적으로 요구되는 용접성에 대한 검토가 충분히 이루어져야 한다. 따라서 본 고에서는 알루미늄합금, 특히 7000계열 알루미늄합금에 주목하여, 용접방법, 각종 결함과 대책, 용접부의 시효경화와 응력부식균열 및 기계적 성질 등을 지금까지 보고된 각종 자료를 기초로 하여 3회에 걸쳐 기술하고자 한다.
Mg-6Zn-2Cu 및 Mg-6Zn-1.5Si(wt%)합금의 미세조직 및 석출거동을 조사하였다. 합금은 $4 x 10^{-4}$ 의 진공분위기에서 제조하였고 용체화처리는 $435^{\circ}C$에서 8시간 행하였다. Mg-6Zn합금에 1.5wt.%Si를 첨가한 합금에서는 입계 및 입내에 $10\mu\textrm{m}$-2$\mu\textrm{m}$크기의 구형의 $MgZn_{2}$와 $Mg_{2}$Si상이 존재한다. 시효경화거동은 용체화처리된 Mg-6Zn-2Cu 및 Mg-6Zn-1.5Si합금에서 조사되었다. 결정립 미세화에 의한 경도증가효과는 Mg-6Zn-2Cu합금계에서 크게 나타났으나, 시효에 의한 경도증가효과는 Mg-Zn-Si합금계에서 크게 나타났다. 시효처리 후 생성된 석출상들은 투과전자현미경 분석결과 Mg-6Zn-2Cu합금에서는$ Mg_{2}$$Zn_{3}$이었고 Mg-6Zn-1.5Si 합금에서는 $Mg_{2}$$Zn_{11}$ /이었다.
Lee, Jung-Il;Kim, Hung Giun;Jung, Kyung-Hwan;Kim, Kang Min;Son, Yong;Ryu, Jeong Ho
Journal of the Korean Crystal Growth and Crystal Technology
/
v.28
no.6
/
pp.250-255
/
2018
The CoCrMo as-built alloys prepared by 3D-printing process are studied on tensile strength, wear resistance, crystal structure and microstructure after complex heat-treatment including HIP. In this study, HIP treatment for removing micropores, ambient heat-treatment for formation of metal carbides, and solution heat-treatment for homogenization of the created metal carbides were tried and characterized for applying to artificial joint. The complex heat-treatment effects of the CoCrMo as-built alloys prepared by 3D-printing process were owing to the densification during HIP, formation of metal carbides and homogenization of the created metal carbides. The effects of the complex heat-treatment were confirmed by XRD, FE-SEM and EDS.
The relationship between microstructures and tensile properties depending on various solution treatment temperature and cooling rate of Ti-6A1-4V alloy have been investigated. The complex and random edge shaped $\alpha$ phases were formed after the 1st solution treatment at $\beta$ region and the 2nd solution treatment at $900^{\circ}C$, which was followed by furnace cooled. When the specimen was subjected to the 2nd solution treated at $950^{\circ}C$, and furnace cooled, $\alpha$ phase changed its morphology to equiaxed structure. The aspect ratio showing the appreciation basis of microstructual refinement decreases with the temperature of 1st and 2nd solution treatment. The slightly decrease in strength were observed in the Widmanstltten structures than in the bimodal structures. Also, ductility of the Widmanstatten structures was considerable lower than that of bimodal structures. The tensile-fractured surface of the Widmanstatten structures appears to be quasi-cleavage and dimple fracture, while that of the bimodal structures was the type of ductile fracture. The tensile fracture surface of the bimodal structures can easily be separated into cental crack areas lying generally perpendicular to the tensile axis and shear lip areas lying at angles of high shear(around 45 deg.) to the tensile axis.
Proceedings of the Korean Society for Technology of Plasticity Conference
/
2009.05a
/
pp.310-313
/
2009
Several high nitrogen stainless steel ingots(100kg) were fabricated with changing Ni and $[N]_2$ contents by Pressurized Vacuum Induction Melting(P_VIM). After free forging process, chemical compositions, microstructure and mechanical properties were estimated. Hardness was increased with the increase of $[N]_2$ content. Furthermore, microstructure including a lot of tempering twins was observed with optical microscope. Mechanical properties were estimated as function of solution treatment temperature and cooling method(air/water) under duration time of 1 hr on sample that were fabricated with Ni content under the atmospheric $[N]_2$ pressure. At solution treatment range of $1050{\sim}1100^{\circ}C$, hardness was decreased with the increase of solution temperature and there were little discrepancy of microstructure and hardness with cooling method. Computer simulation was carried out in order to inspect pass schedule in cold rolling process. When the condition of simulation was roll speed of 2.5mpm, rolling rate $15{\sim}17%$ per pass, it was ascertained that the formation such as deformation by sticking and lamellar sliver etc. was restricted from a simulation.
Kim, Hoe-Bong;Go, Dae-Hun;Jeong, Eun-Uk;Lee, Jong-U;Jo, Yeong-Rae
Proceedings of the Materials Research Society of Korea Conference
/
2011.10a
/
pp.39.2-39.2
/
2011
7075알루미늄 합금은 기계적 강도가 가장 높은 고강도 합금으로 열처리 공정이 반드시 필요하다. 그러나 열처리 공정 중 재료의 두께에 따른 내부 온도의 차이로 인한 잔류응력이 발생하여 최종 제품의 치수에 변화를 일으켜 제품 생산에 어려움이 있다. 따라서 본 연구에서 극저온 열처리 공정을 통하여 야기되는 7075알루미늄 합금의 기계적 특성 및 미세조직에 관하여 연구하였다. 7075 알루미늄 합금은 석출경화를 통한 강화가 이루어지며, 석출경화를 위해서 용체화 처리를 하여 인공시효를 하는 기존 공정과 비교하여 극저온 열처리 공정은 두 개의 추가적인 단계를 가지고 있다. 첫 번째 단계는 -196도의 액체 질소 속에 샘플을 극저온 ��칭을 하는 단계이고, 두 번째 단계는 샘플의 온도를 급격하게 올리는 up-hill quenching이다. 잔류응력은 X-ray diffraction을 이용한 $sin2{\psi}$ 방법으로 측정되었다. 극저온 열처리 후 기계적 특성을 평가하기 위하여 vickers hardness를 측정하였으며 미세 조직의 특성을 파악하기 위하여 EBSD와 TEM을 이용하여 평가하였다.
Journal of Advanced Marine Engineering and Technology
/
v.7
no.2
/
pp.36-49
/
1983
최근 높은 경제성과 용접성의 우수성에 의한 마찰 용접의 응용에 있어서 내열.내식 재료가 개스터어빈, 기관, 핵 발전기등의 기계 부품 생산 공업에 널리 이용되고 있다. 따라서 이종내열 합금강의 마찰 용접된 부품을 이용함에 있어서 내식.내마모 및 용접성 뿐만 아니라 고온 피로 강도와 크리이프 강도 등의 복합 특성에 관한 연구가 요구되고 있다. 본 연구에서는 마르텐사이트계 실크롬 내열강과 오오스테나이트계 닉켈크롬 스테인레스강의 이종 내식.내열 합금강의 최적 용접조건하에서 마찰 용접된 후의 시효 열처리가 용접재의 700 .deg.C 고온 회전 굽힘 피로강도 특성에 미치는 영향에 관하여 실험과 강도해석에 의해 조사되었고 용접후의 용체화 처리와 시효 열처리법에 의한 내열강 마찰 용접강도 개선법을 개발코저한 것이다.
Sn-rich합금의 석출 현상을 조사하였다. 첫째, 대기중과 진공 중에서 용해된 90Sn-o10Bi(wt%)합금을 $140^{\circ}C$에서 용체화 처리한 후 석출반응을 조사하였다. 90Sn-10Bi(wt%)합금은 불연속 석출(DP)현상을 나타냈다. 공기 중에서 용융된 시료의 DP반응이 진공 중에서 용융된 시료보다 빠르게 진행되었다. 이것은 공기 중에서 용융하는 과정에서 시료에 용존된 산소에 의해 입계 에너지가 감소한 것에 기인하는 것으로 판단된다. 둘째, 용융 후 서냉 응고된 Sn-Bi(-In)합금을 $140^{\circ}C$이하의 온도에서 열처리하여 미세조직 변화를 조사하였다. 명확한 고경각 입계가 존재하지 않는 응고조직에서, 편석영역으로부터 DP반응이 진행되어 석출셈이 형성되었다. DP반응선단에는 반응계면이 관찰되었다. 이 현상은, 이제까지 알려진 바와는 다르게, DP반응이 반응 전에 존재하는 고경각 입계뿐만 아니라 재결정현상에 의해 새로운 석출계면이 생성될 수 있음을 의미한다. 이러한 재결정 현상은 확산에 의한 정합변형(coherency strain)으로 설명된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.