• Journal of the korean Society of Automotive Engineers
• /
• v.11 no.2
• /
• pp.13-17
• /
• 1989

전기저항을 이용하여 두께가 1-7mm(0.03-0.27in)의 얇은 구조물을 국부적으로 융착시켜 접합하는 점용접은 자동차 및 항공기 부품산업에 활용도가 높아지고 있다. 구조물 접합시 점 용접은 너깃 주위의 열영향부에 잔류응력이 발생하므로 정적강도와 피로강도를 저하시키려는 원인이 되고 있다. 따라서 강도의 저하를 방지하기 위하여 용접시간, 용접전류량, 용접 가압력 등에 대한 최적 용접조건을 설정하기 위한 연구가 많이 진행중에 있다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.13 no.4
• /
• pp.113-120
• /
• 2004

The object of this study is to investigate the effect of compounded welding through the AE(Acoustic Emission) characteristics for weld HAZ(Heat Affected Zone) under the static tensile test. This study was carried out an SWS 490A, high tension steel for electric shield metal arc welding(SMAW), $CO_2$ gas arc welding and TIG welding. Data displays are based on the measured parameters of the AE signals, along with environmental variables such as time and load. The accumulated AE event curve of HAZ definitely have the point of inflection subject to tensile test. The results of the tensile test of HAZ come out electric shield arc welding ＞$CO_2$ gas arc welding＞TIG welding in case of single welding, but generally the tensile test of HAZ come out electric shield arc welding＞ TIG welding ＞ $CO_2$ gas arc welding. These history plots give us useful and powerful information to analyze the results of material evaluation testing.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.1 s.20
• /
• pp.5-13
• /
• 2005

In order to evaluate the credibility of the welded joint design for combat vehicle using A12519, the numerical analysis for the joint model has been studied and the results are compared with the experimental works by the impact projectiles. The numerical approach using LS-DYNA involves the process of the crack initiation and propagation as well as the applications of the failure criteria for both the ductile and brittle failures. The good agreement between the numerical and experimental works are proved.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.63-70
• /
• 1983

Recently, many studies for developing the underwater welding techniques have been carried out in the advanced countries as a manufacturing process and a repairing method according as a great deal of interest in development for various marine industrial fields has been gradually increased. But no study on such underwater welding is available at present in our country. In this study, underwater welding was carried out for welding of domestic structural steel plates (SM41A) of 10 mm thickness, using six types of domestic coated arc welding electrodes on a self-made gravity type underwater welding device, resulting in investigation for the underwater weldability of the domestic structural steel plates as well as for the underwater welding properties and practicability of the domestic welding electrodes.

• Journal of Welding and Joining
• /
• v.10 no.4
• /
• pp.222-229
• /
• 1992

A prediction of penetration and heat affected zone by using Finite Element Method in CO$_{2}$ Arc Welding has been discussed this paper. The temperature distribution of a base metal produced by the CO$_{2}$ arc welding processing is analyzed by using a three dimensional finite element model. The common finite element program ANSYS 4.4A was employed to obtain the numerical results. Temperature dependent material properties, effect of latent heat, and the convective boundary conditions are included in the model. Numerically predicted sizes of the penetration and the heat affected zone are compared with the experimentally observed values. As a result, there was a slight difference between numerical analysis values and experimentally observed values. For in the case of heat affected zone, it was not considered a precise forced convective coefficient value, and in the case of penetration, it was not, considered a arc force.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.1
• /
• pp.36-46
• /
• 1996

This paper deals with determinig the proper friction welding condition and analyzing various mechanical properties of friction welded joints of sintered carbide tool materials(K20, P25, and SKDX5 for the blade part of drill or press punch) to alloy steel (SKH4, SCM440 for the shank part of drill or press punch), the alloy steel to aluminum(A6061 for the interlayer material between the blade part and the shank) and sintered carbide tool materials to alumminum. And also acoustic emission test will be carried out during fiction welding to evaluate the weld quality.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1663-1668
• /
• 2012

A spacer grid, which is one of the structural components in a PWR fuel, is an interconnected array of slotted grid straps that are welded at the intersections to form an egg-crate structure. The spacer grid is required to have sufficient lateral crush strength to enable nuclear reactor shut-down during abnormal operating environments. Previous studies on the lateral crush strength analysis of the spacer grid were performed using only the base material properties. In this study, to investigate the effect of the lateral crush strength of the spacer grid when using the mechanical properties in the weld zone instead of the base material properties, lateral crush strength analysis by considering the mechanical properties in the weld zone as obtained from the instrumented indentation technique was performed, and the results were compared with those of previous studies.

• Journal of Welding and Joining
• /
• v.4 no.3
• /
• pp.43-49
• /
• 1986

Weldability of the TMCP steel manufactured by controlled rolling followed by accelerated cooling process was investigated. For comparison, two other steel plates produced by different manufacturing processes were selected; normalized and controlled rolled. Tandem submerged arc welding with both side one run technique was carried out. The results of this study can be summarized as follows; TMCP steel having the lowest carbon equivalent shows the best combination of mechanical properties, not only in the base metal but also in the heat affected zone. In the HAZ, the accelerated colling effect imarted on the trengthis releved by the weld thermal cycles, and thus the strength of the welded joint decrease substantially accompanied with the fracture in the HAZ. On the other hand, not only the softening but the fine microstructure can preserve the high toughness of TMCP steel in the HAZ.

• Nuclear industry
• /
• no.8_9
• /
• pp.40-43
• /
• 1979

• Journal of Welding and Joining
• /
• v.14 no.3
• /
• pp.20-28
• /
• 1996

고밀도 에너지를 열원으로 이용하는 고출력 레이저로는 CO$_{2}$레이저와 Nd;YAG 레이저가 있다. 레이저는 열가공임에도 불구하고 빔의 스폿경을 작게하여 높은 에너지 밀도($10^{6}$ W/cm$_{2}$ 이상)을 얻을 수 있으므로 열영향이 작고 작은 변형범위내에서 용접을 할 수 있고 입력 에너지의 제어성이 좋아서 미세한 용접이 가능하게 하고, 빔폭 대비 용입깊이가 커서 깊은 용접 비드가 형성되며, 자동화가 용이하다는 장점이 있다. 특히 Nd;YAG 레이저의 경우는 광 섬유를 이용하므로서 에너 지의 시간 분할 및 에너지 분할을 할 수 있는 등 분기 및 배치가 용이하며 펄스의 활 용을 극대화 할 수 있는 장점이 있다. 그러나, 결점으로도 맞대기 용접의 경우 갭의 여유가 판두께, 초점위치, 빔모드에 따라 변화하는데 이는 빔 스폿이 작음에 따른 장점이 단점으로 작용하는 경우이다. 레이저 용접부의 비드 폭이 좁기 때문에 인장 강도가 모재의 인장강도보다 밑도는 것도 겹쳐서 용접된 이음 부분의 인장강도에 있 어서 단점이 되고 있다.