• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.129-134
• /
• 2017

The process of producing a fish trap frame is very complicated and manual, so it is expensive, the quality of the product is unstable, the quality is not guaranteed, the durability is weak, and it cannot be used for a long time. Therefore, we made a fish trap frame-making machine to reduce the manpower and costs and to make robust products. This machine cuts the wire of mild steel to a certain size and then makes the connecting parts into a trapezoid shape by spot welding. In this study, the weld point shear strength between manual and automatic operation was compared and analyzed.

• Journal of Industrial Technology
• /
• v.5
• /
• pp.21-26
• /
• 1985

본(本) 연구(硏究)는 주조(鑄造) 및 용접(溶接)을 통하여 제작(製作)된 화력발전용(火力發電用) 대형(大型)밸브에 발생한 결함(缺陷)의 원인(原因)을 규명하기 위하여 사용(使用)된 몇가지 기술에 대하여 언급하였다. 초음파(超音波) 비파괴검사(非破壞檢査)로써 내재(內在)되어 있는 균열의 위치(位置) 및 길이를 예측(豫測)하였다. 균열의 근원(根源)을 다치지 않게 보존(保存)한 채로 시험편(試驗片)에 대(對)하여 기계적 절단(絶斷)을 행하였다. 또한 균열의 원인(原因)을 직접 관찰할 수 있도록 액체 질소에서 낙추법(落錘法)을 써서 파단(破斷)시켰다. 동시(同時)에 균열의 측면양상(側面樣相)과 미세조직(微細組織)과의 관계를 금속현미경 및 전자현미경(SEM)을 통하여서 관찰하였다. 결론적으로 제조시(製造時) 도입(導入)된 결함(缺陷)은 용접과정중에 만들어진 것이 아니라 주조작업중(鑄造作業中)에 용융금속(溶融金屬)의 공급부족(共給不足)으로 인(因)하여 생긴 기공(氣孔)에서 출발(出發)하였음을 알 수 있었다.

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.76-84
• /
• 1994

Droplet transfer modes due to welding conditions and the effect of Ca in welding wire on droplet transfer were investigated. Droplet transfer mode in CO$_{2}$ welding was classified into 2 modes, that is, short circuit and globular transfer, with increasing welding current and voltage. With increasing Ca content in wire, repulsive pressure due to vaporization of Ca was considerably increased. In short circuit transfer region, arcing time was increased and droplet transfer cycle was decreased, with increasing Ca content. In globular transfer region, welding condition for globular transfer was lower current region, with increasing Ca content.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.13 no.1
• /
• pp.25-34
• /
• 1976

Analytical solutions for the transient temperature and quasi-static thermal stresses which arise in thin plates subjected to an instantaneous point source of heat have been investigated. And the solutions have been extended to the case of a moving source of heat with the aid of the Duhamel's superposition integral. For finite disk an experiment was conducted, the measured temperature histories show a good agreement with the theoretical temperature histories, And the histories of thermal stresses show a good qualitative agreement with the physical phenomena. And also we can find out that the maximum temperature and thermal stresses and their location can be estimated by using the solutions for infinite plates instead of the solutions for a finite plate. The solutions can be used for the problems such as a welding or line heating in a hull construction.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.206-213
• /
• 1996

Longitudinal deformation due to welding of built-up beams must be straightened for attachment with plates. Straightening of deformation is carried out by much experienced workers and requires much time and labor. In this study, a procedure to calculate the required reverse curvatures to straighten the welding deformation is presented and a method to simulate the fabrication procedures for the built-up beams is developed for the purpose of improvement of productivity.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1993.10a
• /
• pp.27-33
• /
• 1993

천마 연소관 및 Bracket는 고강도 특수강의 일종인 Maraging steel C-250 Grade로서 유동성형공정 (flow forming process: F/F) 및 용접공정을 거쳐 시효경화후의 경도(HRC 48-52)가 높아 절삭가공 및 Tapping에 어려움이 있다고 판단되어 브라켓 밀링가공(Tapping포함)을 시효경화공정 이전에 완성하는 것으로 공정 FLOW를 설정하였으나, 시효경화 시 유동성형공정 잔류응력 및 재질특성에 의한 수축, 변형 등으로 도면상 요구된 품질(형상 및 위치공차) 만족이 미흡하였을 뿐만 아니라 오히려 전체 공정 수만 증가하였음. 따라서 연소관 및 Bracket 완성가공을 시효경화 후에 실시하는 것으로 공정 개선 하고자 시험 작업한 결과, 선삭, 밀링작업등 다른 기계가공 공정의 문제점은 대부분 해결할 수 있었으나, Tapping공정만은 해결할 수 없어서 진정한 공정개선을 기할 수 없었음. 그러나, 제품의 품질 및 생산성을 고려 시효경화 후 Tapping 공정실시 필요성이 강력히 대두되어 Maraging steel 재질특성에 적합한 공구 및 작업조건을 검토, 설정 시험작업 함으로써 공정개선을 이룰 수 있었음.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.6
• /
• pp.589-595
• /
• 2013

This paper was to study the effect to Yongrak phenomenon of I groove submerged arc welding depending on the plasma cutting surface characteristics, and how to reduce the causes and characteristics Yongrak phenomenon. Shipbuilding and marine structures is designed to use the thick plates and welded by high current to obtain deep penetration. Yongrak phenomenon has been occurred frequently depending on the quality of cutting surface and it makes degrade of the welding quality and modification of the welding. As a result, it was confirmed that I Groove plasma cutting characteristics get bevel form of 2 to 4 degrees to one side direction from the vertical position with Yongrak phenomenon. This is the main reason of Yongrak phenomenon in butt joint welding and 4 degree reverse bevel on the upper surface of base metal by submerged arc welding brought the effect of significant reduction of Yongrak phenomenon.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.103-110
• /
• 2008

A reliable extraction of welded area is the precedent task before the detection of weld defects in industrial radiography. This paper describes an attempt to detect and extract the welded features of steel tubes from the computed radiography(CR) images. The statistical properties are first analyzed on over 160 sample radiographic images which represent either weld or non-weld area to identify the differences between them. The analysis is then proceeded by pattern classification to determine the clustering parameters. These parameters are the width, the functional match, and continuity. The observed weld image is processed line by line to calculate these parameters for each flexible moving window in line image pixel set. The local statistic line-clustering method is used as the classifier to recognize each window data as weld or non-weld cluster. The sequential procedure is to track the edge lines between two distinct regions by iterative calculation of threshold, and it results in extracting the weld feature. Our methodology is concluded to be effective after experiment with CR weld images.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.283-284
• /
• 2007

• Journal of the Korea Construction Safety Engineering Association
• /
• s.30
• /
• pp.32-33
• /
• 2004

외형뜨기, 조각과 용접 등 100여 단계의 세부공정을 모두 수작업으로 해야만 하는 작업. 그래서 하루 10시간씩 일해도 꼬박 4일이 걸리는 은장도 제작으로 아버지의 뒤를 이어가고 있는 울산 광역시무형문화재 제1호 장도장 전수자 임동훈씨를 만났다.