• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.3
• /
• pp.100-107
• /
• 1984

농축산 배설물을 호기성 환기처리하여 토양에 환원이용을 목적으로 컴포스트(Compost)화 할 때에 공극률(Pore space)에 미치는 물리적인 자 성설의 상화관계를 공명하고져 실험을 수행하였다. 본 연구는 여러가지 수준의 압축력에 따른 첨가 재료의 공극률 변화 과정 측정하고 이와 동시에 서로 다른 5종류의 재료별 입자 크기에 대하여 영수률, 용적 중량, 용적 밀도 및 입자 대소가 공극률에 미치는 영향을 조사분석 하였으며 그 결과는 아래와 같다. 1. 세립자 재료의 용적 밀도는 세립자보다 더욱 크게 나타났다. 2. 염수률과 용적 중량이 증가하면 용적밀도는 커지나 공극률은 감소하였다. 3. 공극률은 영수률과 용적 중량보다 첨가재료의 입자크기와 대소분포에 더욱 커다란 영향을 받고 있었다. 4. 영수률이 55~65%이고, 용적중량이 0.25~0.38g/cm2이며 입자크기가 1.5~5cm인 범위내의 효율적인 콤포스트화에 있어서 공극률은 65~80%의 범위를 형성하고 있음을 알 수 있다.

• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.411-418
• /
• 2012

The effect of built-in volume ratio of expander on the performance of a two-loop Rankine cycle system for engine waste heat recovery of vehicle has been investigated. In the case of positive displacement expander in the various operating condition of the vehicle, it can operate in both under-expansion and over-expansion conditions. Therefore, the analysis of off-design performance for the expander is very important. Furthermore, the volume and weight of the expander as well as the efficiency must be considered in the optimization of the expander. This study shows that the built-in volume ratio of expander causing under-expansion at a target condition is more desirable considering the off-design performance and size of the expander, based on the simple modeling of off-design operation of the expander.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1441-1446
• /
• 2012

An axial-piston-type hydraulic motor involves friction and leakage losses at the sliding parts, contact loss at the mechanism assembly parts, volumetric loss caused by the pressure drop, housing oil churning loss and compressibility from the hydraulic oil pipe resistance, etc. the friction and volumetric loss at the hydrostatic bearing between the piston shoe and the swash plate rotating at high speed and having an oil film gap of 8-15 ${\mu}m$ strongly affects the total efficiency of the hydraulic motor. In this study, a variable swash-plate-type hydraulic piston motor operating under a maximum pressure of 35 MPa, maximum speed of 2,500 rpm, and displacement of 320 cc/rev is tested to verify the optimal ratio of the hydrostatic bearing which is closely related to the hydraulic motor performance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.1043-1044
• /
• 2012

• Transactions of The Korea Fluid Power Systems Society
• /
• v.3 no.4
• /
• pp.1-7
• /
• 2006

A water hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency. A water hydraulic pump has commonly a fixed displacement type and its outlet flow is adjusted by controlling rotation speed of the pump, which can be implemented by using an electric inverter. This study aims to investigate energy efficiency of the water hydraulic pump system which is driven by an electric inverter. The study is based on the experimental results. The pump which is used in the study shows relatively good efficiency and low leakage, low friction as well. The reasons for the good performance of pump is also investigated.

• Investigative Magnetic Resonance Imaging
• /
• v.13 no.1
• /
• pp.63-73
• /
• 2009

Purpose : To investigate the effects of various intracranial volume (ICV) measurement methods on the sensitivity of hippocampal volumetry and modulated voxel-based morphometry (mVBM) in female patients with major depressive disorder (MDD). Materials and Methods : T1 magnetic resonance imaging (MRI) data for 41 female subjects (21 MDD patients, 20 normal subjects) were analyzed. Hippocampal volumes were measured manually, and ICV was measured manually and automatically using the FreeSurfer package. Gray and white matter volumes were measured separately. Results : Manual ICV normalization provided the greatest sensitivity in hippocampal volumetry and mVBM, followed by FreeSurfer ICV, GWMV, and GMV. Manual and FreeSurfer ICVs were similar in normal subjects (p = 0.696), but distinct in MDD patients (p = 0.000002). Manual ICV-corrected total gray matter volume (p = 0.0015) and Manual ICV-corrected bilateral hippocampal volumes (right, p = 0.014; left, p = 0.004) were decreased significantly in MDD patients, but the differences of hippocampal volumes corrected by FreeSurfer ICV, GWMV, or GMV were not significant between two groups (p > 0.05). Only manual ICV-corrected mVBM analysis was significant after correction for multiple comparisons. Conclusion : The method of ICV measurement greatly affects the sensitivity of hippocampal volumetry and mVBM. Manual ICV normalization showed the ability to detect differences between women with and without MDD for both methods.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.627-631
• /
• 1993

스크류 압축기는 진동이 적고, 소형이면서 고효율을 유지하기가 용이하다는 특징을 가지고 있으며, 원통형 밀패용기 내에 암,수로터가 서로 반대 방향으로 맞물려 회전하면서, 로터홈과 케이싱 사이에 생기는 공간의 용적이 로터회전에 의해서 가스를 흡입, 압축, 배출하는 합축기 이다. 본 연구는 로터의 치형 함수의 기하학적성질 및 제한사항을 고려하여, 대칭 치형을 치수의 조합과, 원, 점, 직선, 타원을 사용하여 비대칭 치형을 설계하였다. 본 연구의 목적은 설계된 치형과 기존의 치형을 치형 형상의 변화에 따른 특성값 (실라인길이, 누설삼각형, 용적곡선, 흡입 및 토출 홈면적)의 변화에 대하여 연구함으로서 성능검토를 시도하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.146-150
• /
• 1993

screw압축기는 진동이 적고, 소형이면도 그효율 유지가 용이하다는 특징을 가지고있으며, 왕복압축기와 같은 crank가 없고 원통형 밀폐용기 내에 암,수 로타가 서로 반대 방향으로 맞물려 회전하면서 로타홈과 케이싱 사이에 생기는 공간의 용적이 로타의 회전에 의해서 가스를 연속적으로 흡입, 압축, 배출하는 용적형압축기이다. 본 연구는 screw 압축기의 성능에 큰 영향을 미치는 로타의 치형함수의 기하학적성질 및 제한사항을 서술하였고, 로타의 형상이 특성값에 미치는 영향을 이론적으로 해석 하기 위하여, 임의의 치형을 갖는 로타를 만들고, 이것과 맞물리는 상대로타의 치형을 설계하여 seal line length와 blow hole area을 계산하였다.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.23-27
• /
• 2017

An expander of an organic Rankine cycle is an essential component that significantly influences its entire performance and cycle efficiency. The inlet pressure and temperature of the expander used for the organic Rankine cycle are limited by the expander's mechanical properties and the characteristics of the working fluid. The organic Rankine cycle's output, heat absorption, and efficiency are altered by the inlet pressure and temperature of the expander. In this study, a theoretical comparative analysis was conducted on an organic Rankine cycle's performance changes, which are dependent on the inlet condition of the expander. The working fluid is an R134a refrigerant, and the expander is a positive-displacement type.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.106-113
• /
• 2016

Ultra-high pressure positive displacement pump can discharge high pressure water with mass volume, which depends on periodic changes in volume that made by rotation motor. Its high efficiency of discharge is one of the most strong point of positive displacement pump. Due to its simple system structure, it can be miniaturized and lightened. Positive displacement pump can discharge high pressure with stable flow rate, irrespective of pressure fluctuate. This is the reason that positive displacement pump was used instead of centrifugal pump. In this study, shutoff operating system was developed for positive displacement pump to secure safety of high pressure operate. This shutoff system contains controller system, electronic clutch, and relief valve, and each part is mutual supplementation. Speed test was carried out in order to check operation of controller program and electronic clutch and fluid flow, venting experiment of the relief valve. It was confirmed that segment system of ultra-high pressure positive displacement pump is operated.