• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.358-362
• /
• 2003

An electrochemical reduction technology which can reduce the decay heat, volume, and radioactivity of spent fuel by a factor of quarter by converting oxide type spent fuel to a metallic form in a molten salt was developed and mock-up test in a 5kg $U_3O_8$/batch scale was carried out. The electrochemical reaction was analyzed regarding the operational factors. The research efforts was also concentrated on the apparatus development for a hot test. Fresh $U_3O_8$ powder was metallized with a more than 99% yield via this electrochemical technology and design data for the 20kg $U_3O_8$/batch scale apparatus were also obtained.

• Composites Research
• /
• v.19 no.6
• /
• pp.32-37
• /
• 2006

This paper summarizes the processing inorganic continuous fibers from Korean minerals. Continuous filament fibers have been produced from two rocks, basalt and quartz diorite porphyry(QDP), by melting method. The essence of the method is that the vitrified materials was placed into the bushing, platinum/rhodium alloy crucible with a nozzle, and heated electrically to a temperature which allowed fiber spinning. Vitrified basalt without additive was suitable for producing continuous filament fiber. However doping quartz diorite porphyry with boric oxide yielded a material which could be pulled continuously.

• Composites Research
• /
• v.30 no.2
• /
• pp.116-125
• /
• 2017

The purpose of this study is to develop silicon carbide fiber showing an excellent mechanical properties under highly oxidative conditions at high temperature. Polycarbosilane(PCS) as a preceramic precursor was used for making the SiC fiber. PCS fiber was taken by melt spinning method followed by melting the PCS at $300{\sim}350^{\circ}C$ in N2 gas. The Curing of PCS fiber was carried out in air oxygen chamber, prior to high temperature pyrolysis. Degree of cure was calculated by characteristic peak's ratio of Si-H to $Si-CH_3$ in FT-IR spectra before and after curing of PCS fiber. The properties of SiC fiber was affected greatly by the degree of cure. The SiC fiber produced by controlling fiber tension during heat treatment showed good properties. The SiC fiber exposed to $1000^{\circ}C$ at air from 1 min. up to maximum 50 hrs showed around 60% reduction in tensile strength. We found that large amount of carbon content on the fiber surface after long-term exposure has resulted in lower tensile strength.

• Composites Research
• /
• v.26 no.2
• /
• pp.123-128
• /
• 2013

The PVDF (polyvinylidene fluoride) fibers were prepared using the wet spinning processing. To improve ${\beta}$-phase crystalline which closely related piezoelectric property PVDF wet spun fibers conducted post treatment. Post treatment is consisted of heat stretching and annealing process. The heat stretching and annealing conditions were controlled by changing temperature between glass transition temperature and melting temperature. From these experimental data, the resulting crystal structure of the ${\beta}$-phase crystalline was confirmed by FT-IR and XRD experiments. From these analysis results, optimum stretching and annealing conditions of the wet spun PVDF fibers were founded to increase high ${\beta}$-phase crystalline. Furthermore results showed that thermal processing had a direct effect on modifying the crystalline microstructure and also confirmed that heat stretching and annealing could increase the degree of crystallinity and ${\beta}$-phase crystalline. Finally, piezoelectric constant ($d_{11}$) of the post heat treated PVDF fibers reinforced composite were measured to investigate the feasibility for the sensing materials.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.2
• /
• pp.143-150
• /
• 2010

Vitrification technology has been gradually recognized as one of effective solidification methods for concentrated boric acid wastes generated in PWR. Vitrification for low- and intermediate-level radioactive wastes has a large volume reduction and good durability for the final products. A feasibility study for the vitrification of concentrated boric acid wastes has been performed with developing the pre-treatment methods of powdered wastes, glass compositions using glass formulation and demonstration test. The pre-treatment method is pelletizing the powder type for stable feeding within cold crucible melter. The glass compositions should be developed considering molten glass are related with wastes reduction. High contents of sodium and boron within borate wastes give influence to waste loading. A variety of factors obtained from the demonstration test are reviewed, which is wastes feeding rate, off-gas characteristics on stack and glass characteristics of final products such as durability for implementing the wastes disposal requirement. The aim of this paper is to present the feasibility of vitrification and review the solidification method for concentrated boric acid wastes and obtain the physicochemical characteristics of solidified glass.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.173-181
• /
• 2000

IAEA자료에 의하면 원자력 발전용 원자로는 1998년말 현재 세계 32개국에서 434기가 운전중이며, 총 출력은 3억 4889만kW인 것으로 나타났고, 이는 세계 총 발전량의 17%를 담당하는 것으로 확인되었다. 그러나 농축 우라늄 고체 핵연료를 사용하는 발전로 개념은 근본적으로 핵물질 SEU(Slightly Enriched Uranium)를 생산하기 위한 235U 농축과 노내에서 238U의 중성자 포획으로 전환.생성되는 Pu의 누적에 따른 핵확산 우려, 고준위 방사성 폐기물로 취급되는 사용후 핵연료 처리.처분에 관한 정책적.기술적 장기 전망의 불확실성, 그리고 설계기준사고인 LOCA로부터 중대사고로 이어지는 안전성 문제 등이 대두되고 있다. Th$^{233}$ /U용융염 핵연료주기를 이용하는 발전로 개념은 원자력 발전이 안고있는 고유문제들을 배제 또는 완화할 수 있는 방안으로 고려되고 있다.(중략)

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.781-786
• /
• 1995

석탄화력발전소 산업부산물인 Fly ash를 이용한 고준위방사성폐기물의 붕규산 유리고화 가능성을 분석하였다. Fly ash SiO$_2$, NaNO$_3$, B$_2$O$_3$에 DUPIC 핵연료 제조공정으로부터 발생되는 모의 scrap waste를 20 wt% 혼합하여, l15$0^{\circ}C$ 에서 3시간 용융시켜 붕규산유리화시켰다. 또한 붕규산유리고화체의 침출성을 평가하기 위하여 2일동안의 soxhlet 침출실험결과 양호한 내침출성을 보였다. 또한 고체폐기물의 안정화물질로 fly ash를 사용할 경우 fly ash 함량을 57%까지 첨가하여도 붕규산유리고화체의 제조가 가능함을 확인하였으며, fly ash의 첨가로 인한 유리화원료 재료비를 30% 까지는 절감시킬 수 있을 것으로 예상된다.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.611-626
• /
• 1994

격납건물 사건수목 방법은 확률론적 안전성 평가시 격납건물 해석의 핵심을 이루는 부분으로서 계통안전 분석으로부터 파악된 주요 노심용융 사고경위와 격납건물 방호계통의 적절한 조합에 의하여 선정된 발전소손상군을 초기조건으로 하여 격납건물 파손 및 방사선원 방출에 영향을 주는 격납건물 내부에서 발생 가능한 주요 사고진행 과정을 체계적으로 다룰 수 있는 유용한 수단이다. 원자력 안전성 향상연구이후 격납건물의 건전성을 확보하기 위한 많은 노력의 결과 현재까지 격납건물 해석 및 논리체계는 상당한 기술적 진보를 이루어 왔으나 아직도 이를 기술하는 방식에는 논쟁의 여지가 많고, 중대사고와 관련된 여러 현상들을 반영할때 그것의 논리적 타당성을 객관적으로 평가할 수 있는 방법이 아직 확고히 정착되지 못함으로 인하여 격납건물 해석결과에는 많은 불확실성 이 존재한다. 또한 아직까지 기존 방법론에 대한 어떠한 종류의 체계적 분석도 이루어지지 않음으로 인하여 이들에 대한 논리적 한계점을 파악하는 데 많은 어려움이 있다. 본 연구에서는 지금까지 주로 개발, 사용되어 온 다양한 격납건물 사건수목 분석 방법론을 소개하고 이들 각각이 지니고 있는 기술적인 문제점을 고찰하며 이를 바탕으로 격납건물 사건수목이 갖추어야 할 기본논리, 구조에 대한 안내지침을 제시함으로써 효과적인 격납건물 해석 및 방법론 개발에 도움을 주고자 한다

• Science of Emotion and Sensibility
• /
• v.13 no.4
• /
• pp.687-692
• /
• 2010

This paper surveys emission characteristics of Far-infrared of the fabrics fabricated with germanium imbedded sheath-core conjugate composite filaments. For this purpose, master batch chip was prepared with PET semi-dull chip and nano sized germanium particles and sheath-core type conjugate composite filament was spun using this master batch chip and polyester semi dull. The emission power and emissivity of the germanium imbedded fabrics were measured and investigated using FT-IR spectrophotometer by KICM- FIR 1005 measurement method. In addition, the fabric mechanical properties were measured and discussed with the effects of the optimum texturing process conditions and fabric structural design conditions. The sheath/core type PET composite germanium imbedded filaments were manufactured by the optimum spinning condition, its tenacity and breaking strain showed the same level as the regular PET filament. The tenacity and breaking strain of the DTY showed good physical properties and no problem in the weaving process. Then, wet and dry shrinkages showed higher values than those of regular PET filament. The emission power of the germanium imbedded fabric was $3.53{\times}10^2W/m^2$ at the $5-20{\mu}m$ wave length range, and emissivity was 0.874. The fabric hand of germanium imbedded fabrics was inhanced by the optimum texturing process and fabric structural design with improved mechanical properties such as fabric bending and compressional properties.

• Fire Science and Engineering
• /
• v.16 no.1
• /
• pp.39-44
• /
• 2002

In this paper, we analysed the flame patterns and the electrical characteristics of the electric outlet which was fired at standby mode. The carbonized patterns indicated that the flame had spread about 50 cm to 70 cm. After the combustibles on wall started to burn, the temperature went up to about $300^{\circ}c$ in 150 sec. The flame formed ceiling jet and spread quickly. The tracking was generated at the shortest distance between two electrodes and the resistance was about 100$\Omega$ to 300$\Omega$ As the result of analysis using metallurgical microscope, the normal part of a blade holder showed amorphous structure, but the melted part of a blade holder damaged by tracking showed dendrite structure and void evenly. When the blade holder of damaged outlet was analyzed by SEM and EDX, we found that the structure and components of the normal part were different from those of melted part.