• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.115-118
• /
• 2002

셀룰로오스는 가장 범용적으로 쓰이는 천연고분자이지만, 합성고분자에 비하여 가공이 어렵다는 단점을 가지고 있다. 이러한 문제점을 해결하기 위하여 셀룰로오스와 합성 고분자를 블렌딩하는 방법이 고안되었다. 합성고분자가 셀룰로오스와 상용성을 갖기 위해서는 그것이 셀룰로오스와 분자간 상호작용을 이룰 수 있어야 한다. 폴리아미드, 폴리에스터, 그리고 비닐계 고분자는 이러한 조건을 만족할 수 있을 것으로 예상되어 이들 고분자와 셀룰로오스의 블렌드계에 대한 연구가 진행되고 있다. (중략)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.5
• /
• pp.191-198
• /
• 2022

Zirconia and titanium alloys, which are mainly used for dental implant materials, have poor osseointegration and osteogenesis abilities due to their bioinertness with low bioactivity on surface. In order to improve their surface bioinertness, surface modification with a bioactive material is an easy and simple method. In this study, akermanite (Ca₂MgSi₂O₇), a silicate-based bioceramic material with excellent bone bonding ability, was synthesized by a solid-state reaction and investigated its bioactivity from the analysis of surface dissolution and precipitation of hydroxyapatite particles in SBF solution. Calcium carbonate (CaCO₃), magnesium carbonate (MgCO₃), and silicon dioxide (SiO₂) were used as starting materials. After homogeneous mixing of starting materials by ball milling and the drying of at oven, uniaxial pressing was performed to form a compacted disk, and then heat-treated at high temperature to induce the solid-state reaction to akermanite. Bioactivity of synthesized akermanite disk was evaluated with the reaction temperature from the immersion test in SBF solution. The higher the reaction temperature, the more pronounced the akermanite phase and the less the surface dissolution at particle surface. It resulted that synthesized akermanite particles had high bioactivity on particle surface, but it depended on reacted temperature and phase composition. Moderate dissolution occurred at particle surfaces and observed the new precipitated hydroxyapatite particles in synthetic akermanite with solid-state reaction at 1100℃.

• Journal of the Korean Ceramic Society
• /
• v.39 no.11
• /
• pp.1063-1068
• /
• 2002

Polyimide/silica(PI/silica) hybrid materials having physical or chemical bonds between the PI and silica network were prepared using sol-gel process through hydrolysis and polycondensation of tetraethoxysilane with the polyamic Acid(PAA) or end-capped PAA solution. PAA solution was synthesized by ring opening reaction of pyromellitic dianhydride and oxydianiline monomers in dimethyl acetamide solution. End-capped PAA solution was synthesized by the addition of 3-aminopropyltriethoxysilane in PAA solution. PI/silica hybrid samples were characterized by infrared spectroscopy, differential thermogravimetry, X-ray diffractometry, scanning electron microscopy, and tensile tester. It has been demonstrated that the properties of hybrid samples were affected by the silica content and the bond type between PI and silica.

• Journal of Biomedical Engineering Research
• /
• v.16 no.3
• /
• pp.257-264
• /
• 1995

The $\beta$-chitin derivatives were synthesized by reacting $\beta$-chitin with chloropropane, propyleneoxide and chloropropane diol to form propyl chitin (PPC), hydroxypropyl chitin (HPC) and dihydroxypropyl chitin (DHPC), respectively. Cast films from $\beta$-chitin and $\beta$-chitin derivatives solutions degraded by Iyrozyme in pseudo-extrra cellular fluid (PECF) solutions, at pH1.2, pH6.7 and pH8.2. Chitin derivatives rapidly degraded compared with virgin $\beta$-chitin within the first week. DHPC showed the best biodegradation among these derivatives.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.765-770
• /
• 2001

광촉매용 ZnO 나노크기의 분말은 시작원료와 연료의 종류에 따라 용액연소법에 의해 제조되었다. 결정상은 XRD로부터 확인할 수 있었으며 분말의 하소온도는 TG 분석으로부터 결정되었다. 분말의 비표면적은 BET 법에 의해 측정되었으며 평균입자크기와 형태를 SEM과 TEM으로부터 조사하였다. 또한 분말의 순도를 조사하기 위해 적외선 흡수스펙트럼을 측정하였으며 광촉매 효율로서 은이 첨가된 사진현상액을 이용하여 은의 수거율을 측정하였다. 용액연소법으로 제조한 경우 시작원료와 연료에 관계없이 단상의 ZnO 분말을 쉽게 얻을 수 있었다. 그러나 합성된 ZnO 분말의 입자크기와 형태는 연료의 종류에 따라 서로 다르게 보였다. 특히, 연료로 glycine을 사용한 경우, ZnO 분말의 입자 형태는 균일한 나노 크기의 구형이었으나 carbohydrazide을 사용한 경우에는 판상과 같은 형태를 보였다. 이러한 결과를 기초로 하여 시작원료와 연료로 Zn(OH)$_2$와 glycine을 사용하여 합성된 ZnO 분말이 우수한 분말 특성을 보였으며 75nm의 입자크기와 94$m^2$/g의 비표면적을 보였다. 또한 사진현상액에 존재하는 은이 3분 이내에 완전히 제거되는 우수한 광촉매 성질을 보였다.

• Journal of the Korean Ceramic Society
• /
• v.35 no.3
• /
• pp.209-218
• /
• 1998

Ca-deficiency frequently observed in the hydroxyapatite powders prepared by precipitation which is known to be deleterious for its application to biomaterials was prevented by the technique developed in this study. In addition the prepared powder has been revealed to be quite active that full density is achieved at temperatures as low as 100$0^{\circ}C$ Instead of using N2 air was chosen as the processing atmosphere during the precipitation and aging of hydroxyapatite. {{{{ {CO }`_{3 } ^{2- } }} ions from the processing atmosphere(air) substitute partly for {{{{ {PO }`_{4 } ^{3- } }} ions in the hydroxyapatite and its content can be controlled by pH of the solution where the pre-cipitation reaction occurs.

• Journal of the Korean Ceramic Society
• /
• v.39 no.3
• /
• pp.308-314
• /
• 2002

The nanocrystalline zirconia powder was synthesized from the zirconium hydroxide precipitate by hydrothermal process with the reaction temperature range 100∼250$^{\circ}$C, reaction time 1∼48 hours and additive concentration 1, 5 N NaOH solutions. The lower hydrothermal treatment temperature, the inner spherical tetragonal zirconia was synthesized. The fraction of monoclinic phase zirconia with rod shape increased with increasing the hydrothermal treatment temperature. As the concentration of the NaOH solution increases, the synthesized particle in breadth and length increased; breadth and length ratio decreased. In the case of the low concentration of NaOH solution, however, the particle length became relatively larger than its breadth resulting in the rod-shaped particles with bigger aspect ratio.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.506-511
• /
• 2006

ZnO nanorods were prepared by the hydrothermal reaction of a solution containing $Zn(NO_3)_2{\cdot}6H_2O$, NaOH, cyclohexylamine, ethanol and water, and their $NO_2$ and CO sensing behaviors were investigated. By the control of water concentration in solution, the morphology and agglomeration of ZnO nanorods could be manipulated, which is associated with the variation of $[OH^-]$ resulted from an interaction between water and cyclohexylamine. Sea-urchin-like and well-dispersed ZnO nanorods were prepared at low and high water content, respectively. Well-dispersed ZnO nanorods showed 1.8 fold change in resistance at 1 ppm $NO_2$ while there was no significant change in resistance at 50 ppm CO. This selective detection of $NO_2$ in the presence of CO can be used in automated car ventilation systems.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.677-682
• /
• 2006

Dodecyldimethylethylammonium (DDDEA), a cationic surfactant, and aluminum metal ions were used with bentonite to synthesize to synthesize an improved organo bentonite. Among three different synthesis procedure for organo bentonites, aluminium-pillared bentonite showed the highest DDDEA sorption, which indicated that aluminium-pillared organo bentonite would exhibit the highest sorption capacity for organic contaminants. Aluminium pillared organo bentonite also showed a high sorption capability for phosphorus, while it did not exhibit strong sorption for nitrate. In the meantime, more desorption was observed with aluminium-pillared organo bentonite than ordinary organo bentonites.

• Journal of the Korean Ceramic Society
• /
• v.38 no.8
• /
• pp.749-754
• /
• 2001

마이크로파 추출 및 하소 공정을 통하여 카올린으로부터 베타 알루미나 전구체 및 베타 알루미나 분말을 합성하였다. 황산 알루미늄 및 가성소다의 혼합 용액을 교반되는 에탄올 용액 중에 적하시켜서 $Al_2$(SO$_4$)$_3$.17$H_2O$ 및 $Na_2$SO$_4$.10$H_2O$의 균일한 침전물을 얻었다. $\beta$- 및 $\beta$\"-Al$_2$O$_3$상으로 구성된 베타 알루미나를 얻기 위하여 재래식 및 마이크로파 하소법으로 주어진 온도에서 약 2h 동안 침전물 시료를 하소하였다. 재래식 하소된 시료에 비하여 마이크로파 하소된 시료는 $\beta$\"-Al$_2$O$_3$상이 상대적으로 많이 존재하였다. 또한, 재래식 하소된 시료와 마이크로파 하소된 시료의 미세구조는 매우 상이하였다. 매우 상이하였다.