• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.135-140
• /
• 2014

Pressure vessels are used in various industrial fields. If a defect occurs on the inner or outer surface of a pressure vessel, it may cause a massive accident. A defect on the outer surface can be detected by visual inspection. However, a defect on the inner surface is generally impossible to detect with visual inspection. Nondestructive testing can be used to detect this type of defect. Laser speckle shearing interferometry is one nondestructive testing method that can optically detect a defect; its advantages include noncontact, full field, and real time inspection. This study evaluated the detectable size for an internal defect of a pressure vessel. The material of the pressure vessel was ASTM A53 Gr.B. The internal defect was detected when the pressure vessel was loaded by internal pressure controlled by a pneumatic system. The internal pressure was controlled from 0.2 MPa to 0.6 MPa in increments of 0.2 MPa. The results confirmed that an internal defect with a 25 % defect depth could be detected even at 0.2 MPa pressure variation.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.176-183
• /
• 2014

Acoustic emission testing (AET) of cylinders is advantageous in that it can be directly conducted on cylinders installed in a car, without needing to dissemble them on a real-time basis. Therefore, users prefer AET over other nondestructive testing methods. Owing to these advantages of AET, it has been approved by the Department of Transportation of the U.S. as a safety evaluation method for pressure containers or as an alternative to the hydroproof testing method. This paper presents a study of the quantitative evaluation criteria for a container having ultrasonic testing defects and also for Type 1 and Type 2 gas cylinders, which are defective seamless pressure containers provided by NK, a manufacturer of pressure containers. For the Type 1 cylinder, the process from crack growth to leak was observed in a repetitive fatigue test using a 113 L container according to ASTM E 1419-02. Further, for the Type 2 cylinder, integrity was evaluated using a 119 L sound container and a container damaged by hydraulic pressure, by the slow-fill method according to ASTM E 2191-02. Based on the AET results of the Type 1 and Type 2 cylinders, quantitative evaluation criteria were established for a defective and non-defective container.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.323-325
• /
• 2006

CBTC 시스템에서는 선로변에에 설치된 선로변무선기(Wayside Radio Set 이하, WKS)가 상호 무선통신을 수행하고, 각 WRS간의 거리를 항상 측정하고있도록 설계되었다. CBTC지상장치가 WRS간에서 측정된 WRS간 측정거리를 SRS에서 수신하고, log의서 기록한다. 기록한 로그를 이용하여 적정값을 판단한다. 본 시험에서는 WRS간의 무선통신에서 안정적인 측정 데이터가 취득되는지를 확인하였다.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.153-159
• /
• 2007

In-cryostat helium lines are under installation to transfer a cryogenic helium into cold components in KSTAR device. In KSTAR, three kinds of helium should be supplied into the cold components, which are supercritical helium Into superconduction(SC) magnet system, liquid helium into current lead system, and gas helium into thermal shields. Cryogenic helium lines consist of transfer lines outside the cryostat, in-cryostat helium lines, and electrical breaks. In-cryostat helium lines should be guaranteed of leak tightness for tong time operation at high internal helium pressure of 20 bar. We wrapped the helium line with multi-layer insulator(MLI) to reduce radiation heat and insulated the surface of the high potential part with prepreg tape. The electrical break was fabricated by brazing ceramic tube with stainless steel tube. To ensure the operation reliability at operation temperature, all the electrical break have been examined by the thermal cycle test at liquid nitrogen and by the hydraulic test at 30 bar. And additional surface insulation was prepared with prepreg tape to give structural safety. At present most of the in-cryostat helium lines have been installed and the final inspection test is progressing.

• Composites Research
• /
• v.20 no.4
• /
• pp.31-41
• /
• 2007

Dome shape design methods of Filament Winding (FW) composite pressure vessel, which can suggest various dome contour according to the external loading conditions, were investigated analytically and numerically. The performance indices(PV/W) of the pressure vessels with same cylinder radius and boss opening but different dome shape were evaluated by finite element analysis under the internal pressure loading condition. The analysis results showed that as the dome shape becomes flat, the performance index decreases significantly due to the reduced burst pressure. Especially, for the case of the high value of the parameter ro, the ratio between the radii of the cylinder part and the boss opening, the flat dome is disadvantageous in the aspect of the weight reduction, and additional reinforcing dome design technique should be required to increase the burst pressure. For example, above ro=0.54 condition, the dome shape change according to the loading condition could cause the low burst pressure and increase of composite weight in dome region and is not recommendable except for the special case that maximum inner volume or sufficient space between skirt and dome is the primary design objective. However, at ro=0.35, the dome shape change brings not so significant differences in the performance of FW vessel.

• Korean journal of applied entomology
• /
• v.19 no.2 s.43
• /
• pp.85-89
• /
• 1980

This experiment was carried out to investigate the life history of the Three spotted plusia (Chrysodeixis agnata Staudinger) in the laboratory in 1976. (1) Female deposited $1202{\pm}150.6$ eggs during the oviposition period which was $13.3{\pm}1.2$ days. (2) Especially, larvae were distinguished with 5-instar type and 6-instar type. The egg period was 2 days and adult longevity was $21.29{\pm}3.15$ days for female and $19.14{\pm}2.47$ days for male. Larval period and pupal period were $15.36{\pm}1.59,\;7.82{\pm}1.01$ days for the 5-instar type and $16.92{\pm}1.08,\;8.23{\pm}1.09$ days for the 6-instar type. (3) Width of head capsule of the 5-instar type was $2.77\~2189mm$ and this of the 6-instar type was $2.78\~22.38mm$. (4) A highly significant correlation was recognized between the log-width of head capsule and the number of instar.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2517-2520
• /
• 2003

본 논문에서는 가상 디바이스 네트워크에 대한 개념과 틀을 제시하였다. 디바이스 제어 네트워크로서 LonWorks 네트워크를 선택하고, 데이터 네트워크로는 이더넷을 선택하여 가상 디바이스 네트워크를 구성하였다. 가상 디바이스 네트워크의 전달 특성을 데이터 네트워크의 전달 특성과 함께 조사하였다. 가상 디바이스 네트워크 상에서의 실시간 제어를 위해 불특정한 시간 지연을 보상할 필요가 있다. 유한한 H₂노옴을 갖는 Smith 예측 제어기를 이용한 직류서보모터의 제어실험을 통하여 제안된 제어기의 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.379-381
• /
• 2003

국내 전파법을 바탕으로 경량전철신호제어시스템용 무선통신장치와 무선데이터통신시스템간 간섭거리를 계산하였다. 무선데이터통신시스템이 실내에 설치되어 있는 경우 경량전철신호제어시스템용 무선통신장치를 사용하는 것이 문제없음을 화인하였다. 또한 실외의 경우에도 큰 문제없이 신호제어시스템용 분석장치를 사용할 수 있음을 확인하였다.

• Bulletin of the Korean Space Science Society
• /
• 2007.10a
• /
• pp.66.1-66.1
• /
• 2007

• 전기의세계
• /
• v.38 no.1
• /
• pp.21-30
• /
• 1989

가스 절연개폐장치(GIS)에 있어서 단로기 또는 차단기의 개폐조작시나 자락고장이 생겼을 때는 급준과도전압(VFT)가 발생한다. 이 급준파의 크기는 단로기의 개폐조작시 재점호가 일어날 때가 대지절연파괴를 일으킬때의 극간전압차에 의하여 결정되며, 반사와 전반에 의해 중첩된 진행파로 되는 이른바 급준과도과전압(VFTO)로 된다. 이 VFT의 상승율은 표준뢰임펄스전압보다 크며, 최초의 파두장은 4-7[ns]의 것도 있다. 또 이 VFT전압은 GIS내부 뿐만 아니라 가공 송전선과 대지간, GIS의 용기와 대지사이 등 외부에도 나타난다. 따라서 GIS의 내부와 외부에서 VFT의 스트레스가 나타나므로 GIS의 설계시에 충분히 고려하여야만 된다. 지락고장에 의해 발생되는 용기과도전압(TEV)도 불꽃방전시에는 인가전압의 2배 정도로 되는 경우도 있으므로 절연설계 및 현장시험시에 고려할 필요가 있다. 단로기의 개폐조작시 발생하는 VFT의 피이크치를 최악의 경우로 상정할 때는 절연레벨을 상당히 저하시키며, 특히 GIS내에 돌기물과 같은 이물질이 존재하여 불평등전계를 형성할 때는 절연파괴전압이 대단히 전하된다. 변압기나 부싱 등과 같은 전력기기에서는 외함과 접지사이의 전압을 제한하여 설계할 필요가 있으며 용기와 대지사이의 외부과도과전압(FTO)를 저감시키기 위해서는 GIS의 외함을 각각 분할하여 제작할 필요가 있다.