• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.4
• /
• pp.28-33
• /
• 2009

Yoke is a part of rotor in unmanned helicopter. It was transferred power of engine to the rotor. It has been usually produced by machining and used wastefully material. And it has been considered to improve its proof stress against repeated loading of the products. Therefore we studied Forging process for satisfaction of these ability and process design for yoke forming has been studied by using FE analysis. Die design and forming analysis have been performed according to the conditions such as billet volume, flash control, cavity filling, and the distribution of damage in the products. In the comparison between die forging processes, side punch effects has been investigated by considering billet dimensions.

• Journal of Veterinary Clinics
• /
• v.21 no.4
• /
• pp.398-401
• /
• 2004

A ten-year-old, female Yorkshire terrier dog with intermittent vomiting, weight loss, polydipsia and depression was referred to the Veterinary Medical Teaching Hospital of Konkuk University. On the radiological survey, gas and fluid-filled gastric distention was detected. No contrast medium entraneed to the small bowel, in 60 minutes after contrast medium administration. And marked fluid accumulation in gastric body and thickening of the pyloric mucosa were found with ultrasonograph. So gastric obstruction by reason of pyloric stenosis was strongly suspected. At the surgery, hypertrophied mucosa was resected adequately, and Heineke-Mikulicz pyloroplasty was applied. Microscopically the symptom was characterized by gastric mucosa hyperplasia and mild diffuse Iymphoplasmocytic gastritis. So this condition was diagnosed as chronic hypertrophic pyloric gastropathy. Intermittent vomiting and mild depression were shown for 9 days after the operation. After that, the patient was recovered gradually. One month later, the patient had normal appetite and activity without complications.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.1
• /
• pp.36-41
• /
• 2003

The purpose of this study was to find a way to lengthen the life of hot closed forging die. The fluid interpretation on the plastic deformation of billet of billet was performed by finite element method. And design modification on the impression shape was also performed. The defaced part on the impression surface was mended by the developed build-up welding method. The die life was 3,000 units but alter the procedure it was lengthened up to 5,000.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.202-205
• /
• 1995

Developed controller is the part of deflection yoke winding machine which controls the power to form the deflection yoke coil into desired shape after winding. So as to form the deflection yoke coil, it is needed to melt the bonding material which is spreaded on the coil. The heat melt the bonding material which is produced by flowing the current through the winded coil. Therefore, at first it is needed to peel off the enamel from the winded coil so as to flow the current, and then supply the power to produce the heat which form the winded coil into desired shape. Naturally developed controller is composed of the peeling part and the conduction and forming part. All of them consist of the inverter structure and control the output current. The peeling is achieved by low voltage and high AC current, the conduction and forming is by DC current. Developed controller also has a function that detect the resistance of the deflection yoke coil to prevent the damage of the load which is produced by poor peeling.

• Transactions of Materials Processing
• /
• v.31 no.2
• /
• pp.51-56
• /
• 2022

In this study, finite element analyses were performed by applying a stress ring and split die design to relieve the tensile stress acting on the die due to high surface pressure during warm-closed forging. The applied material was a yield-ratio-control-steel (YRCS). It was used without quenching or tempering after forging. In the case of stress rings design, the number of stress rings and the tolerance for shrink fit were different. Vertical and horizontal splits were applied for insert die split design. Case 5 die with three stress rings, 0.2 % shrink fit tolerance, and vertical split was selected as an effective die design for tensile stress reduction. Based on die stress reduction analyses, Case 5 die for warm-closed forging was produced and smooth forgeability was secured, making it possible to manufacture forging product of yoke with the required geometry. In addition, controlled cooling using warm forging heat was applied to secure mechanical properties of yokes. When oil cooling was used for direct controlled cooling after warm-closed forging, a relatively uniform Rockwell hardness distribution and high mechanical properties could be obtained.