• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.66-75
• /
• 2003

A high intensity acoustic test facility has been constructed at Korea Aerospace Research Institute (KARI). Spacecrafts are tested in the facility to check the reliability on acoustic environment of launch vehicles. The reverberant chamber of the facility has a volume of 1,228 cubic meters and provides an acoustic environment of 152 dB over the frequency range of 25 Hz to 10,000 Hz. This paper describes how the basic parameters of the facility including a chamber and power generation system are designed. Moreover, design parameters including acoustic spectrum, acoustic modulator characteristics, reverberation time and isolation characteristics are experimentally verified during acceptance tests.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.445-448
• /
• 2007

석탄가스화 복합발전(IGCC)에서 석탄 가스화 기술이 전 공정의 성능에 큰 영향을 미치는 중요한 요소이다. 연료 및 산화제의 공급방식, 가스화기의 기본 구조, 벽면의 구성 방식, 용융 슬랙 및 생산되는 합성가스 배출 방식 등에 따라 가스화의 성능이 영향을 받는다. IGCC plant의 정확한 성능 해석을 위해서는 석탄가스화기 공정 모델의 정밀도를 높일 필요성이 있다. 기존의 열병합 발전 사이클 해석에서 적용되었던 열 및 물질정산과 평형계산 방식을 통하여 석탄가스화기 공정을 해석하는 방법을 확인, 정리하고 이를 개선하기 위한 절차 및 방안을 제시하고자 한다. 가스화기 내부 공정을 크게 탈휘발과 가스화의 단계로 구분하여 가스화기 출구조건을 예측하였으며, ASPEN PLUS를 이용한 공정해석을 실시하였다. 가스화기 출구에서의 합성가스는 주생성가스인 CO, $H_2$를 위주로 하여 조성을 얻을 수 있고, 그 결과들을 선행연구들과의 비교를 통하여 가스화기 모델의 분석을 실시한다. 그리고 가스화기 해석의 정밀도를 높이기 위한 향후 고려될 가스화기 모델에 관하여 논의한다.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.332-340
• /
• 2017

This study aims to propose a new optimization-based approach for design and analysis of the stand-alone hybrid energy supply system using renewable energy sources (RES). In the energy supply system, we include multiple energy production technologies such as Photovoltaics (PV), Wind turbine, and fossil-fuel-based AC generator along with different types of energy storage and conversion technologies such as battery and inverter. We then select six different regions of Korea to represent various characteristics of different RES potentials and demand profiles. We finally designed and analyzed the optimal RES stand-alone energy supply system in the selected regions using multiobjective optimization (MOOP) technique, which includes two objective functions: the minimum cost and the minimum $CO_2$ emission. In addition, we discussed the feasibility and expecting benefits of the systems by comparing to conventional systems of Korea. As a result, the region of the highest RES potential showed the possibility to remarkably reduce $CO_2$ emissions compared to the conventional system. Besides, the levelized cost of electricity (LCOE) of the RES-based energy system is identified to be slightly higher than conventional energy system: 0.35 and 0.46 $/kWh, respectively. However, the total life-cycle emission of $CO_2$ ($LCE_{CO2}$) can be reduced up to 470 g$CO_2$/kWh from 490 g$CO_2$/kWh of the conventional systems.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.103-103
• /
• 2011

비스코스레이온(Viscose Rayon)소재는 목재 펄프를 원료로 한 재생섬유(습식방사)로서 Drape성과 반발성은 탁월하나, 습식방사에 따른 분자구조적 불안정성으로 건 습열처리시 형태불안정(치수변화율이 큼)으로 제직(준비) 및 후공정상 여러 가지 Trouble 유발과 완제품 세탁시 수축발생으로 종종 Dry Creanning 해야 하는 문제점들이 내재되어 있다. 또한 수분흡수시 강도저하, 수축과 구김, 염색 불균염 등의 문제점과 섬유공정상 생활취급상에 많은 애로를 가지고 있으며, 구성고분자가 수소결합에 의해 강고하여 "신축문제", 수분흡수시 팽윤(Swelling)에 의한 형태불안, 즉 "수축문제"가 개선해야 할 고질적 문제로 남아있다. 따라서 본 연구에서는 레이온 소재의 형태안정화 제품을 개발하기 위하여 복합사고공 및 염색가공 기술을 개발하고자한다. 신축 및 복합기술에 의한 Rayon DTY, N/R 신축 및 복합기술에 의한 Rayon DTY, N/R 복합가공사를 개발, 제편직 요소기술과 염가공기술을 연구하므로서 형태안정성 레이온 복합소재 제품을 개발하고자 한다. Rayon 소재의 후공정 용이성과 형태안정성을 부여하기 위하여, 레이온 DTY가공사, Rayon-합섬 장(長)-장(長) 복합사를 개발하여 CoolBiz용 냉감소재 및 스포츠 웨어 소재 등으로 활용하고자 한다. 사가공기술에 의한 신도 16%, 수축률 1.6%인 형태안정 Rayon DTY 소재를 개발하였으며, 선연후가공기술에 의하여 N/R 복합가공사를 개발, 신도 18%, 수축률 1.2%인 차별화 레이온 소재를 개발하였다. 이에 기존 Rayon 후가공 및 염색공정과 상이한 개발된 선연후 가연 Rayon DTY가공사 및 T/R혼방사를 활용한 직물에 대하여 최적 전처리, 염색 후가공 공정의 최적 조건을 알아보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.3
• /
• pp.1770-1777
• /
• 2014

Coastal settlements have a diversity of tangible or intangible local assets and are environmentally sensitive areas. The value of tangible or intangible local assets is often overlooked and there is no enough consideration for the inhabitants who have a various and acute stake in the development process of coastal settlements. The development of coastal settlements without consideration for the local circumstance, resident's needs, and local characteristics makes it difficult to achieve sustainable regeneration. There are also alienation, conflicts, and the loss of a authentic sense of place because of physical oriented development without regard to the social, economic, and cultural aspects. This research defines the components and types of coastal settlements and draws the characteristics of them around the fishery ports in Busan in the aspect of sustainable regeneration. It will be the important methods for an integrated regeneration including not only spatial and physical regeneration but also social and economic regeneration which has the preservation of local culture with living conditions, local economy activation, and community building. It will also provides the bases of sustainable development, attractiveness, and competitiveness of coastal settlements.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.136.1-136.1
• /
• 2010

고체산화물 연료전지(SOFC)에서 사용되는 연결재의 주 기능은 각 단위 셀의 연료극과 다음 셀의 공기극을 전기적으로 연결하여, 공기와 사용연료의 분리역할을 하기위해 사용된다. SOFC용 연결재는 다른 구성요소 소재보다 높은 전기전도성, 낮은 이온전도성이 요구되며 SOFC는 고온에서 작동되기 때문에 다른 구성 소재들과 유사한 열팽창계수와 물리, 화학적인 안정성이 요구된다. 현재 연결재 제조기술은 plasma coating, sputtering, screen printing, 전사법등 다양한 연구가 진행되고 있다. 본 연구에서는 저렴한 비용으로 대량생산이 용이한 고상반응법을 적용하여 세라믹연결재를 제조하고, 그 특성을 연구하였다. 세라믹 연결재로서 선정한 합성조성은 $(La_{0.7}Ca_{0.3})(Cr_{0.9}Co_{0.1})O_3$로 SOFC 작동온도에서 높은 전기전도도를 나타낸다. LCCO 연결재를 1300, 1400 및 $1500^{\circ}C$에서 합성을 진행하였을 때 출발원료로 $CaCO_3$를 $CaF_2$로 대체하였을 때의 소결특성을 평가하였고, SEM과 XRD분석을 통하여 균질하고 결정성이 우수한 분말이 합성된 것을 확인하였고 DC impedance analyzer를 사용하여 전기전도도를 측정하였다. TMA를 사용하여 열팽창계수를 측정한 결과 YSZ(${\sim}10.8{\times}10^{-6}/^{\circ}C$)와 동일한 값을 나타내었다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.242-255
• /
• 2006

In the recent years, Popularization of mobile devices such as Smart Phones, PDAs and MP3 Players causes rapid increasing necessity of Power management technology because it is most essential factor of mobile devices. On the other hand, despite low price, hard disk has large capacity and high speed. Even it can be made small enough today, too. So it appropriates mobile devices. but it consumes too much power to embed In mobile devices. Due to these motivations, in this paper we had suggested methods of minimizing Power consumption while playing multimedia data in the disk media for real-time and we evaluated what we had suggested. Strict limitation of power consumption of mobile devices has a big impact on designing both hardware and software. One difference between real-time multimedia streaming data and legacy text based data is requirement about continuity of data supply. This fact is why disk drive must persist in active state for the entire playback duration, from power management point of view; it nay be a great burden. A legacy power management function of mobile disk drive affects quality of multimedia playback negatively because of excessive I/O requests when the disk is in standby state. Therefore, in this paper, we analyze power consumption profile of disk drive in detail, and we develop the algorithm which can play multimedia data effectively using less power. This algorithm calculates number of data block to be read and time duration of active/standby state. From this, the algorithm suggested in this paper does optimal scheduling that is ensuring continual playback of data blocks stored in mobile disk drive. And we implement our algorithms in publicly available MPEG player software. This MPEG player software saves up to 60% of power consumption as compared with full-time active stated disk drive, and 38% of power consumption by comparison with disk drive controlled by native power management method.

• International Area Studies Review
• /
• v.22 no.1
• /
• pp.261-284
• /
• 2018

Global changeover to renewable energy is an inaugurate initiatives as one of the UN sustainable development goals. But the State alone can not achieve its goal, in particular, countries classified as bad governance. However, when the combination of innovative public-private partnerships including technology and operational innovation can be made, it can provide with rural remote villages of developing countries with more sustainable environment. In other words, we tried to show examples of success in energy supply by reducing costs and increasing marketability through various partnerships(technological innovation benefits). Base on the question, this paper examines the cases of Steama.Co, Ewang'an in Kenya, and Grameen Shakti in Bangladesh, and analyzes the developmental effects of differences in partnership types.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.545-555
• /
• 2020

The purpose of this study is to derive the linkage between urban regeneration and district unit planning, in order to supplement the limitations of the spread of the effects of individual urban regeneration projects. To this end, institutional changes and previous studies with theoretical backgrounds were reviewed, the urban regeneration strategic plan and district unit plan cases in the spatial scope of Jeju Island were analyzed, and a unified administrative procedure to strengthen linkages was proposed. In addition, when selecting priorities for active regions, we reviewed how to use the indicators of involvement of residents, which enabled the project to be performed smoothly by grasping the participation of residents and the elements of complaints. Also a hypothetical target site was set up and suggested how to establish a district unit plan by type. Depending on the circumstances and environment of the site, the use of the land use plan and the regulation and mitigation of the district unit plan may be appropriately used to expect the inhabitants to expand their participation and revitalization. This study suggests ways to revitalize decayed areas beyond systematic urban planning in connection with systematic plans, to improve administrative procedures, and to promote bottom-up projects.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.147-152
• /
• 2018

This study investigates the demand management and energy saving plan of the apartment house based on the ESS (: Energy Storage System), which is the main equipment in the field of electric power energy efficiency, and suggests standardization for various technical factors and operation. It contributes to the spread of ESS industry. In addition, to create ESS market for apartment houses and smart homes, housing IoT technology is used to integrate apartment houses with smart home-based ESS and it is possible to achieve use efficiency and economic feasibility of power users, We will study a business model that can reconsider the acceptability of power users.