• Korean Journal of Soil Science and Fertilizer
• /
• v.26 no.2
• /
• pp.72-77
• /
• 1993

This study was conducted to evaluate coated urea complex fertilizer (CUC) application for rice growth and its grain quality on clay loam (Deogpyeong series) and sandy loam (Gangseo series) in southern region of Korea, 1992. The coated urea complex fertilizer used in the experiment was CUC I and II. The CUC I is a complex fertilizer consisting of 18-12-13 for $N-P_2O_5-K_2O$ including 50% of coated urea as nitrogen source, and CUC II is the same complex fertilize as mentioned above but it contains 25% of coated urea. Seventy percent of conventional fertilizer for nitrogen level was applied as basal dose of side-band placement (SBP) and whole plowlayer placement (WPP). Greenish degree of rice leaf color at the late growth stage was high in CUC plots regardless of application method and soil series. Amount of nitrogen uptaken by the rice plant at harvesting stage was mush more in the CUC treatment compared to convential fertilizer, and also much more in CUC I than that of CUC II. In the WPP on clay loam, harvest index of CUC treatment was showed very low level, which was reduced more in CUC II plot. In the CUC treatments, perfect rice grain ratio decreased remarkably, and the notched-belly rice kernel ratios among imperfect rice grain increased drastically. In rice grain, Hon-value(Mg to K.N ratio) decreased, protein and amylose contents increased in CUC application plots in WPP. In addition, gel consitency and alkali spreading value related to eating quality in CUC plots were getting longer and lower, respectively. The yield in CUC plot was similar to conventional fertilizing, but significant decreased in SBP. As a result, the rice grain quality became poor with the coated urea complex fertilizer application, but it could be improved by incorporation with fast-release fertilizer.

• Journal of the Korean Ceramic Society
• /
• v.38 no.6
• /
• pp.575-581
• /
• 2001

세라믹/금속기지 복합재료에서 횡방향의 단축인장하중을 받는 경우, 복합재료의 특성에 관한 시뮬레이션 결과이다. 세라믹과 금속기지간 계면에 강한 결합이 존재하는 복합재와, 계면에서의 결합이 약한 복합재의 두 경우에 대하여 횡방향 평균응력과 평균변형율에 대한 관계를 계산하였다. 복합재료의 미시역학적개념과 유한요소해석법을 적용하여 세라믹체적분율의 변화에 따라 각기 해석되었다. 본 연구에서 계산된 횡방향 탄성계수는 문헌에 알려져 있는 미시역학개념으로 유도된 식에 의한 횡방향탄성계수값과 잘 일치되었다. 계면에서 강한 결합이 있는 복합재와는 달리, 약한 결합의 복합재는 인장하중에 의하여 세라믹/금속계면에서 금속재료와 세라믹간의 분리가 발생된다. 이 분리는 전체복합재의 강성을 감소시키며, 금속의 부피분율이 감소될수록 (즉, 세라믹의 부피분율이 증가할수록) 횡방향 평균응력의 평균변형율에 대한 감소로 나타났다. 미시역학의 개념을 적용한 유한요소해석기법을 통하여, 이미 알고 있는 복합재 각 성분의 특성으로부터 복합재료의 계면특성과 횡방향특성을 예측할 수 있다.

• Composites Research
• /
• v.30 no.6
• /
• pp.338-342
• /
• 2017

In this paper, evaluation method of structural integrity of cylindrical composite lattice structures was conducted. A finite element analysis was used to evaluate the structural integrity of composite lattice structures. In order to verify the optimal finite element in the evaluation of the structural integrity, finite element models for cylindrical composite lattice structure were generated using beam, shell and solid elements. The results of the finite element analyses with the shell and solid element models showed a good agreement. However, considerable differences were found between the beam element model and the shell and solid models. This occurred because the beam element does not take into account the degradation of the mechanical properties of the non-intersection parts of cylindrical composite lattice structures. It was found that the finite element analysis of evaluation of structural integrity for cylindrical composite lattice structures have to use solid element.

• Composites Research
• /
• v.34 no.6
• /
• pp.337-344
• /
• 2021

In this study, the progressive failure behavior of the composite fan blade dovetail element under tensile loading is numerically investigated through finite element(FE) simulation. The accuracy of prediction by FE simulation is verified through tensile testing. The dovetail element is one of the joints for coupling the fan blade with the disk in a turbofan engine. The dovetail element is usually made of a metal material such as titanium, but the application of composite material is being studied for weight reduction reasons. However, manufacturing defects such as drop-off ply and resin pocket inevitably occur in realizing complex shapes of the fan blade made by composite materials. To investigate the effect of these manufacturing defects on the composite fan blade dovetail element, we performed numerical simulation with FE model to compare the prediction of the FE model and the tensile test results. At this time, the cohesive zone model is used to simulate the delamination behavior. Finally, we found that FE simulation results agree with test results when considering thermal residual stress and through-thickness compression enhancement effect.

• Computational Structural Engineering
• /
• v.11 no.3
• /
• pp.229-239
• /
• 1998

복합재료는 강도-무게비가 다른 재료들에 비해 훨씬 크기 때문에 부재의 좌굴문제가 대단히 중요하게 취급되며, 본 논문에서는 축방향 압축력을 받는 복합재료로 된 쉘 부재의 좌굴해석이 수행된다. 이 재료는 일반적으로 이방성 재료 특성을 나타내 보이나, 섬유들이 한 방향으로만 배치되어 있는 경우 섬유방향에 연직한 평면에서의 강도나 탄성계수들은 모두 일정한 횡 등방성 재료성질을 가진 것으로 간주할 수 있다. 9 절점 degenerate 쉘 유한요소를 사용한 선형안정해석, LUSAS 범용 프로그램을 이용한 구조해석, 그리고 고전적 쉘 좌굴방정식에 의한 해석들을 수행하였으며, 그 결과들을 서로 비교, 분석하였다. 고려된 등방성 재료나 횡 등방성 재료의 경우 모두, degenerate 유한요소해석으로 계산한 임계하중들은 고전적 이론해에 의한 결과들 보다 낮았으며, LUSAS 결과들과는 거의 같았다. 이는 degenerate 유한요소에 의한 선형안정해석 결과들이 안전측에 듬을 의미하며, 복합재료로 된 쉘 구조물의 좌굴해석에 degenerate 유한요소를 효율적으로 적용할 수 있음을 의미한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.408-408
• /
• 2012

최근 기후변화 때문에 태풍, 호우 등 자연재해로 수방시설물의 피해규모가 커지고 있으며 이러한 피해는 단일 재해요인이 아닌 여러 재해요인이 복합적으로 작용하여 발생하고 있다. 그러므로 도시의 안전성과 방재기능을 확보하기 위해서는 복합위험요소를 고려한 재해위험도의 진단 기술 및 종합적인 재해경감대책 수립을 위한 연구가 필요한 실정이다. 복합위험요소를 고려한 재해위험도 및 재해경감대책을 수립하기 위해서는 도시재해를 유발하는 다양한 요인들이 도시재해에 미치는 영향과 재해요인 중에서 어떠한 재해요인이 도시재해에 더 큰 영향을 미치는지에 대한 검토가 필요하다. 이에 본 연구에서는 정보전달 이론 중의 하나인 엔트로피 방법을 이용하여 복합위험요소를 고려하여 도시지역에 대한 재해위험도를 나타내는 복합위험지수의 가중치를 산정하고자 하였다. 복합위험지수의 가중치는 지표별 속성정보를 추출하여 정규화 과정을 거친 후, 속성별 엔트로피를 산정하여 지표별로 산정된다. 엔트로피 방법에 따라 산정된 가중치는 다른 가중치 산정 방법에 따라 산정된 가중치와의 비교 분석을 통하여 타당성을 검토할 것이며, 이렇게 산정된 가중치를 복합위험지수 산정에 적용한다면, 보다 현실성 있는 도시재해 위험성 또는 취약성 지수로 활용될 수 있을 것으로 판단된다.

• The KIPS Transactions:PartD
• /
• v.18D no.1
• /
• pp.23-34
• /
• 2011

Refactoring has been actively used in recent software developments. Many studies on the processing of more large scaled composite refactorings have been conducted through the composition of elementary refactorings. It is important to verify the possibility of composition before the refactoring is performed, because the composite refactorings are processed to the sequence of composed elementary refactorings. In conventional studies, they verify the possibility of composition using the precondition of composite refactorings which are computed from the precondition and postcondition of elementary refactorings. They can not verify the possibility of composition in case which composite refactorings do not have a specification of precondition. Thus, we plan to verify the possibility of composition by using the elementary refactorings only without any additional definitions of the preconditions of composite refactorings. To achieve this goal, we proposes a specification method of elementary refactorings and a method for the composition check of refactorings. Then, we develop a prototype tool based on these methods. In addition, we verify the efficiency of our methods through case studies.

• Computational Structural Engineering
• /
• v.11 no.4
• /
• pp.169-176
• /
• 1998

불연속적 거동이 탁월한 벽식 프리캐스트 구조물을 해석하기 위한 방법으로 유한요소법과 강체요소법 등이 있으나, 이들 해석법은 접합부의 거동을 정확히 반영하지 못하고 있다. 본 연구에서는 패널은 강체적 거동을 하고, 판널과 판널 사이의 접합부는 고체적 거동을 가정하는 강체-고체 복합모델(Coupled Model by Rigid and Solid bodies)에 의한 해석법을 제안하며, 간단한 모델의 예를 통해 검증하였다.

• Journal of the Korean Society for Railway
• /
• v.13 no.4
• /
• pp.382-388
• /
• 2010

This paper describes the standardized finite element model for carbody structures of railway vehicle made of sandwich composites. Recently, sandwich composites were widely used to railway vehicle due to the improvement of energy efficiency, high specific stiffness and strength, weight reduction and space saving in korea. Therefore, structural integrity should be verified using finite element analysis prior to the manufacture of composite railway vehicle. The standardized finite element model for composite carbody structures was introduced through comparing the results of real structural test under vertical, compressive, twisting load and natural frequency test of various railway vehicles in this study. The results show that the quadratic shell element is suitable to model the reinforced metal frame used to improve the flexural stiffness of sandwich panel compared to beam element, and layered shell and solid element are recommended to model the skin and honeycomb core of sandwich panel compared to sandwich shell element. Also, the proposed standard finite element model has the merit of being applied to crashworthiness problem without modifications of finite element model.

• Composites Research
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2012

In order to predict the thermoelastic behavior of porous composites, poroelastic parameters are measured by using micromechanics-based finite element models. The expanding deformation caused by pore pressure, and the degradation of homogenized elastic moduli with pores are calculated for the assessment of the poroelastic parameters. Various representative volume elements considering the shape, size, and array pattern of pores are modeled and analyzed by a finite element method. The effects of porosity and material anisotropy, and the distribution of stain energy density are investigated carefully. In addition, the measured poroelastic parameters are verified by predicting the thermo-pore-elastic behavior of carbon/phenolic composites.