• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.27-34
• /
• 2010

As VoIP systems move to wireless environments with much higher average packet loss rates than wired networks, it becomes less possible for the network to assure a reasonable QoS. So, real-time quality monitoring for mobile VoIP applications is an important issue to be explored. In this paper, we explore perceptual quality dependency on two parameters: the burst loss rate and average burst length. Also, we propose a simple 'moving average' approach with $\alpha$ aiming to measure those parameters on real-time basis. In order to find how accurately the two parameters measured estimate the real perceptual quality, we compare actual measured PESQ scores with estimated value by matching the measured quality metric to the trained MOS table. Finally, we propose the quality-based accounting system, which can set obvious continuities between quality and billing.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.309-316
• /
• 2022

This study proposes a finite element analysis method that can analyze the vibration of a beam by considering the inertia effect of moving masses in a vertical direction. The proposed method is effective when a precise interaction analysis is not required. The inertial effects of the moving masses are included in the equation of motion, and the interaction forces between the masses and the beam are considered only as external loads. Time domain analyses were performed using Abaqus, a general-purpose finite element analysis software, and an implementation method using multi-point constraints wais presented to link the displacements of the beam element nodes and moving rigid masses. The proposed method was verified by comparing its solution with that obtained using an existing analytical method, and the analysis results for continuous beam vibrations under dynamic gait loadings were used to examine the mass effect of pedestrians.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.61-74
• /
• 1998

The Purpose of this study was to investigate the stress distribution and tooth displacement at the initial phase produced by 5 types of molar uprighting springs using finite element method. The three dimensional finite element model of lower dentition, bone and springs was composed of 5083 elements and 2071 nodes. The results were as follows: 1. In case of helical spring and root spring, intrusion of lower canine and first premolar were observed md distal tipping, translation and extrusion of lower second molar were observed. 2. In case of T-loop, modified T-loop and box loop, intrusion and distal translation of lower second premolar were observed, and the largest crown distal tipping and translation of lower second molar were observed in T-loop and the smallest were observed in box loop. 3. In case of T-loop with cinch-bact crown distal tipping and translation of lower second molar were decreased, but extrusion was also decreased. 4. With increase of activation in T-loop, mesial translation and won distal tipping of lower second molar were increased and edentulous space was closing, but distal translation of second premolar was also increased. 5. With increase of tip-back bend in T--loop, distal tipping and translation of lower second molar were increased, but extrusion was also increased more largely.

• Korea journal of population studies
• /
• v.13 no.1
• /
• pp.37-50
• /
• 1990

본 논문에서는 인구이동과 소득분배의 관계를 분석하기 위하여 상대적 박탈감 개념을 적용한 인구 이동모형을 바탕으로 개인과 사회의 분배요소가 인구이동과 어떤 상호연관성을 갖는가를 이론적으로 검토하였다. 인구 이동으로 인한 개인의 상대적 박탈감의 변화는 이동자와 비이동자의 이동 이전과이후의 상대적 위치와 그들의 준거집단이 누구를 포함하는가에 따라 증가할수 있다. 또한 각 개인의 상대적 박탈감의 변화에 따라 사회적 소득분배는 인구이동으로 인하여 더욱 악화될수 있다는것을 논의하였다.

• The korean journal of orthodontics
• /
• v.25 no.5 s.52
• /
• pp.525-541
• /
• 1995

This study was designed to investigate force systems and tooth movements produced by retraction archwire during retraction of four maxillary incisors after the maxillary canine retraction into the maxillary first premolar extraction space using the computer-aided three-dimensional finite element method. A three-dimensional finite element model, consisting of 2248 elements and 3194 nodes, was constructed. The model consisted of maxillary teeth and surrounding periodontal membranes, .022'$\times$.028'-slot brackets, and 5 types of retraction archwires(.019'$\times$.025' stainless steel archwire) modeled using the beam elements. The contact between the wire and the bracket slot was modeled using the gap elements because of the non-linear elastic behaviors of the contact between them. The forces and moments, End displacements produced by retraction archwire were measured at various conditions to investigate the difference according to types of loops, magnitudes of activation force, gable angle, and anterior lingual root torque. The results were expressed quantitative and visual ways in the three-dimensional method. The following conclusions can be drawn from this study.1. When the tear-drop loop archwire was activated, the mesio-distal and lingual translational movements of the teeth helped to close the extraction space, but unwanted movements of the teeth including intrusions and extrusions, and rotational movements in each direction occurred. 2. Activation of T-loop archwire compared with those of other types of retraction archwires produced the least translational movements of the teeth helped to space closure and also the least unwanted movements of the teeth. 3. Increasing amount of activation in the tear-drop archwire led not only to increase of translational movements of the teeth helped to space closure, but also to increase of unwanted movements of the teeth. 4. Addition of gable bend in the tear-drop archwire helped anterior teeth to translational movements in the mesio-distal direction, but increased unwanted movements of the teeth 5. Addition of anterior lingual root torque in the tear-drop archwire helped central and lateral incisor to improve their facio-lingual inclination, but increased unwanted movements of the teeth.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.2
• /
• pp.214-220
• /
• 2010

In this paper, we developed component for constituent of mobile robot system using RTC which is adapted as an international standardization among the robot middleware technology. We implemented one system by connecting the f elements of mobile robot constituent to each other and performed performance test on mobile robot system using real mobile robot NRLAB 02 that were implemented.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.06a
• /
• pp.33-37
• /
• 1998

본 연구에서는 다공성 지하에서 침출수에 지하 환경의 오염 및 대처 방안의 효과를 수치적으로 예측하였다. 연구대상으고 매립지 지하에서의 침출수의 흐름은 Darcy 법칙을 사용하여 해석하였고, 오염물질의 이동은 이산-분산 모델에 수착의 효과를 고려하여 해석하였다. 침출수의 흐름 및 오염물질의 이동 방정식을 2차원 계를 대상으로 하여 Galerkin유한 요소법을 사용하였다. 수치해석 결과 침출수의 흐름은 매립지 제방 근처에서 강하게 일어나는 것으로 나타났다. 연직 차수막은 오염물질의 이동을 막는데 별 도움을 주지 못하나, 수착은 오염물질의 이동을 지연시키는데 상당한 효과가 있는 것으로 보인다.

• The Journal of Fisheries Business Administration
• /
• v.23 no.2
• /
• pp.41-51
• /
• 1992

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2000.05a
• /
• pp.175-178
• /
• 2000

생명체는 자신을 이루고 있는 단순한 구성 요소들이 적은 수의 근본 규칙들에 의하여 국부적 상호작용을 함으로써 복잡한 생명 현상을 보이고있다 이 연구에서는 생명 현상을 보이고 있는 개체가 많은 수의 단순한 구성 요소들의 집합으로 이루어져 있으며 그러한 구성 요소들이 적은 수의 근본 규칙들에 의하여 서로 국부적인 상호작용을 함으로써 복잡한 행동패턴들을 나타낸다는 가정 아래, 여러 대의 자율이동로봇(autonomous mobile robot)들의 군지능을 나타낼 수 있는 적은 수의 근본 규칙을 찾아내고 찾아진 근본규칙들을 퍼지규칙으로 표현하는 것을 목표로 한다. 각 자율이동로봇은 기능이 매우 제한되어 있으며, 자신만의 독특한 신호를 발생한다. 이 신호를 "heartbeat"이라 부르며 이를 이용하여 대략적으로 자신의 위치와 현재상태를 다른 개체에게 알리는 역할을 한다 이 논문에서는 "heartbeat"을 이용한 로봇간의 통신과 자재반송이라는 군행동을 퍼지시스템으로 구현하고 이를 평가한다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3016-3018
• /
• 2000

생명체는 자신을 이루고 있는 단순한 구성요소들이 적은 수의 근본 규칙들에 의하여 국부적 상호작용을 함으로써 복잡한 생명 현상을 보이고있다. 이 연구에서는 생명 현상을 보이고 있는 개체가 많은 수의 단순한 구성 요소들의 집합으로 이루어져 있으며 그러한 구성 요소들이 적은 수의 근본 규칙들에 의하여 서로 국부적인 상호작용을 함으로써 복잡한 행동패턴들을 나타낸다는 가정 아래, 여러 대의 자율이동로봇 (autonomous mobile robot)들의 군지능을 나타낼 수 있는 적은 수의 근본 규칙을 찾아내고 찾아진 근본규칙들을 퍼지규칙으로 표현하는 것을 목표로 한다. 각 자율 이동로봇은 기능이 매우 제한되어 있으며. 자신만의 독특한 신호를 발생한다 이신호를 "heartbeat"이라 부르며 이를 이용하여 대략적으로 자신의 위치와 현재상태를 다른 개체에게 알리는 역할을 한다. 이 논문에서는 "heartbeat"을 이용한 로봇간의 통신과 자재반송이라는 군행동을 퍼지시스템으로 구현하고 이를 평가한다.