• 한국해양학회지
• /
• v.30 no.3
• /
• pp.147-162
• /
• 1995

The circulation due to tidal current and river discharge, and the associated suspended suspended sediment transport in macrotidal Keum Estuary, were studied through a series of field measurements of tidal currents and suspended sediment concentration at three anchored stations from 1990 through 1992. From the measurements, the following results were obtained. At the seaward entrance of the estuary, the veritical profiles of the ebb and flood currents were almost symmetric. At the southern channel the flood current was dominant in the whole water column, but in the northern channel the ebb current was dominant in the surface and bottom layers and the flood current was dominant in the intermediate layer. The maximum velocity of the tidal current in the southern channel was 174 cm/s during flood tide in the intermediate layer. The maximum velocity, 148 cm/s in the northern channel also appeared during flood tide in the intermediate layer. However, in the surface and bottom layers, the maximum velocities were 110.6 cm/s during ebb tide and 92.1 cm/s during flood tide, respectively. The type of the Keum Estuary can be categorized to 'Type 3' of Hansen and Rattray's scheme. The water column of the estuary during the flood tide becomes stratified, and after high water the ebb current reduces the density difference and the water column becomes turbulent. The lower layer of the water column is generally turbulent. The largest sediment flux 20.61 ton/s was found in the southern channel during flood current in the lowest river discharge (May, 1991), while the smallest flux, 0.65 ton/s in the northern channel in the lowest tidal range (July, 1992). The stronger bottom shear velocity for the present study area seems to erode the bottom sediments during the flood tide, and the relatively long duration of the ebb tide to transport the suspended sediments. Under normal river discharge conditions, the suspended sediments are transported mainly through the southern channel. However, under high river discharge condition the suspended sediment transport is dominant through the northern channel.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.67-67
• /
• 2021

하구에서의 흐름은 하천의 담수와 바다에서부터 유입되는 염수, 조석, 파랑 등으로 인해 복잡한 흐름구조와 혼합 양상을 보인다. 특히 만 내에 하천이 있을 경우 만의 해류특성은 하구에서의 혼합과 이송에 지배적인 영향을 미치며, 하천에서부터 방류되는 입자들은 만의 해류특성 따라 만에서의 체류시간과 이송이 결정된다. 잔차류 특성에 의한 순 물질 플럭스의 방향과 조석비대칭에 따른 하구에서의 퇴적 형태들이 결정되며, 이로 인해 하구에서의 퇴적물 퇴적 및 물질의 집적 위치, 하구 인근과 만에서의 환경변화에 영향을 줄 수 있다. 따라서 만 내에서의 혼합과 입자의 이송확산, 하천 담수의 영향역 등과 같은 만과 하천의 흐름 특성을 이해하는 것은 연안 및 하구의 환경 및 관리에 중요하다. 본 연구에서는 영일만과 형산강을 대상으로 계절변화에 따른 영일만 내 흐름과 형산강 하구에서의 퇴적양상에 대해 수치모의를 통해 수행하였다. 수치모델로는 천수방정식으로 준 3차원 유동해석을 하는 Delft-3D Flow와 파랑모형인 SWAN 모델을 결합하여 형산강 하구와 영일만의 유동을 해석하였다. 상류개방경계는 형산강하구 9 km, 하류개방경계는 영일만 외해 50 km로 설정하였고, 경계조건은 대상지역의 관측소 자료와 전지구 모형자료를 결합하여 구성하였다. 또한, 라그랑쥬 입자추적모델을 통해 형산강 상류에서 유입한 입자들의 영일만 내 체류 시간과 집적 위치를 평가하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.231-231
• /
• 2022

하구에서의 흐름은 하천의 담수와 바다에서부터 유입되는 염수, 조석, 파랑 등으로 인해 복잡한 흐름구조와 혼합 양상을 보인다. 특히 만 내에 하천이 있을 경우 만의 해류특성은 하구에서의 혼합과 이송에 지배적인 영향을 미치며, 하천에서부터 방류되는 입자들은 만의 해류특성 따라 만에서의 체류시간과 이송이 결정된다. 잔차류 특성에 의한 순 물질 플럭스의 방향과 조석비대칭에 따른 하구에서의 퇴적 형태들이 결정되며, 이로 인해 하구에서의 퇴적물 퇴적 및 물질의 집적 위치, 하구 인근과 만에서의 환경변화에 영향을 줄 수 있다. 따라서 만 내에서의 혼합과 입자의 이송확산, 하천 담수의 영향역 등과 같은 만과 하천의 흐름 특성을 이해하는 것은 연안 및 하구의 환경 및 관리에 중요하다. 본 연구에서는 영일만과 형산강을 대상으로 계절변화에 따른 영일만 내 흐름과 형산강 하구에서의 퇴적양상에 대해 수치모의를 통해 수행하였다. 수치모델로는 천수방정식으로 준 3차원 유동해석을 하는 Delft-3D Flow와 파랑모형인 SWAN 모델을 결합하여 형산강하구와 영일만의 유동을 해석하였다. 상류개방경계는 형산강하구 9 km, 하류개방경계는 영일만 외해 50 km로 설정하였고, 경계조건은 대상지역의 관측소 자료와 전지구 모형자료를 결합하여 구성하였다. 또한, 라그랑쥬 입자추적모델을 통해 형산강 상류에서 유입한 입자들의 영일만 내 체류시간과 집적 위치를 평가하였다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.3
• /
• pp.374-384
• /
• 1999

Benthic marine algal flora and community structure of Yongho-dong area in Pusan, Korea were investigated seasonally in intertidal and subtidal zones by a quadrat method along 5 transect lines from July 1996 to April 1997. In this area, a total of 99 species including 3 blue-green, 13 green, 26 brown and 57 red algae was found. Among them, 33 taxa, together with dominant Ulva pertusa and Corallina pilulifera, occurred throughout the year. Enteromorpha spp. and Ulva spp. vertically distributed in upper and middle zone, while Simphyocladia latiuscula, Chondria crassicaulis, Corallina pilulifera and Sargassum sup. in lower zones. Biomass per unit area exhibited a wide range of variation, from 1,241 g/$m^2$(spring) to 1,648 g/$m^2$(summer) in fresh weight. Maximum and minimum species diversity were recorded in spring and autumn, respectively. Results of the UPGAM cluster analysis suggest that the examined 5 sites can be divided into two groups, sites exposed to open sea (transects 1, 2, 3) and comparatively sheltered sites (transects 4, 5) faced with the Pusan Harbor. The former group is represented by large brown algae, Sargassum and Hizikia, while Ulva pertusa and Lomentaria species are mainly found in the latter group. A calcareous alga, Corallina pilulifera occurred dominantly in both groups throughout the year. In conclusion, number of species in this area was remarkably reduced as compared to the previous data. This result may suggest probably more change of algal vegetation in future, considering the physical and chemical pollutions loaded in the coastal marine environment of this area.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2006.08a
• /
• pp.47-68
• /
• 2006

This study aims to determine the association structure of the behavioral relationship variables, such as trust, commitment, cooperation, communication and coercive power, in the relationship between the buyers and suppliers of industrial parts. It also investigates the impact of the use of IT technologies on the relationships quality. Data was collected from 216 part suppliers of machinery, electronics and automobiles located in Incheon. Data supported all of the proposed hypotheses. First, it was confirmed that parts suppliers' trust in buyers leads to the commitment into relationships with buyers. Second, cooperation and communication showed a positive influence on parts suppliers' trust in buyers, and coercive power gave a negative influence on trust. Third, the use of IT technologies like Internet and E-Mail between parts suppliers and buyers was verified to have generally a positive influence on the quality of relationships. At the same time, cooperation and communication were confirmed to have a positive influence on each other, and cooperation and coercive power as well as communication and coercive power were confirmed to have negative influence on each other. This study is a pioneering attempt to examine the relationships between suppliers and buyers of industrial parts, and the influence IT technologies on the relationship quality. Also, the findings will be practically much helpful to find how to reinforce the relationships between parts suppliers and buyers.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.123-130
• /
• 2012

A cooling system is indispensable for the fossil and nuclear power plants which produce electricity by rotating the turbines with hot steam. A cycle of the typical cooling system includes pumping of seawater at the intake pump house, exchange of heat at the condenser, and discharge of hot water to the sea. The cooling type of the nuclear power plants in Korea recently evolves from the conventional surface intake/discharge systems to the submerged intake/discharge systems that minimize effectively an intake temperature rise of the existing plants and that are beneficial to the marine environment by reducing the high temperature region with an intensive dilution due to a high velocity jet and density differential at the mixing zone. It is highly anticipated that the future nuclear power plants in Korea will accommodate the submerged cooling system in credit of supplying the lower temperature water in the summer season. This study investigates the approach flow patterns at the velocity caps and discharge flow patterns from diffusers using the 3-D computational fluid dynamics code of $FLOW-3D^{(R)}$. The approach flow test has been conducted at the velocity caps with and without a cap. The discharge flow from the diffuser was simulated for the single-port diffuser and multi-ports diffuser. The flow characteristics to the velocity cap with a cap demonstrate that fish entrainment can significantly be minimized on account of the low vertical flow component around the cap. The flow pattern around the diffuser is well agreed with the schematic diagram by Jirka and Harleman.

• The Korean Journal of Petroleum Geology
• /
• v.10 no.1_2 s.11
• /
• pp.10-17
• /
• 2004

The Doowoo-ri tidal flat in the southwestern Korean coast is a typical open-coast tidal flat which has no barriers in the offshore such as barrier island and sand bars. The difference of induced wave energy with seasons is affected directly on the distribution of surface sediment and the formation of sedimentary structures because the sedimentation by wind wave is relatively much important element in this open-coast tidal flat. This open-coast tidal flat can be classified into tidal beach, intertidal flat and lower mudflat according to the pattern of geomorphology and sediment type. The intertidal flat can be again divided into 3 types: sand flat, mixed flat and mud flat based on the primary sedimentary structure and sand/mud ratio. Doowoori tidal flat shows a seasonal change in the surface sedimentary facies based on sediment composition and primary sedimentary structure. The change is closely related to the direction and magnitude of monsoon wind and also to storm frequency. In winter and spring, when northwesterly wind is most dominant and strong and also storms are common, sand-flat facies is largely distributed on the intertidal flat, whereas mud-flat facies is most dominant during summer when weak southeasterly wind is common. In the fall season, mixed-flat facies is dominant on the flat. The Doowoori intertidal flat is covered by mud sediment which is ca. 20 cm in thickness in summer season. In winter season, surface sediment is changed from mud to sand because the summer mud is mostly eroded by strong wave action. Can-core peels in the intertidal flat show that parallel laminated mud or sand/mud and climbing ripple cross-laminated sandy silt are dominant on the upper intertidal flat $(0-1.3 {\cal}km)$ during summer season. On the other hand, on lower intertidal flat $(1.7-2.3 {\cal}km)$, dominant sedimentary facies is homogeneous mud. In winter, it is changed into parallel laminated and ripple cross-laminated sand facies.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.6
• /
• pp.648-656
• /
• 2019

The ecological changes in the ocean due to the drastic global warming require that action be taken to sustain the productivity of fisheries. Proper ocean facilities could help prevent the loss of the expenditures made on marine aquaculture and reduce the related compensation for various ocean conditions. The aim of this study was to develop a floating ocean wave-breaker using an eco-friendly concrete and conducting a site survey, a structural analysis, and a test of towing the tank. As a result, the wave at the fish farm would be reduced. The results of the holding power of anchors and the capability of moving the floating structures were considered in the design of the wave-breaker. The analyses of the material properties of concrete and the steel structures, as well as the CAPEX and OPEX analyses of the manufacturing and operation processes confirmed the superiority of the floating concrete wave-breaker. In particular, this study demonstrated that the concrete floating breakwater can protect the fish farm against typhoons and reverse-waves, thereby reducing losses of the fish.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.4
• /
• pp.209-220
• /
• 2019

Even though the scale of hard structures for beach stabilization should carefully be determined such that these structures do not interrupt the great yearly circulation process of beach sediment in which the self-healing ability of natural beach takes places, massive hard structures such as the submerged breakwater of wide-width are frequently deployed as the beach stabilization measures. On this rationale, asymmetric ripple mat by Irie et al. (1994) can be the alternatives for beach stabilization due to its small scale to replace the preferred submerged breaker of wide-width. The effectiveness of asymmetric ripple mat is determined by how effectively the vortices enforced at the contraction part of flow area over the mat traps the sediment moving toward the offshore by the run-down. In order to verify this hypothesis, we carry out the numerical simulations based on the Navier-Stokes equation and the physically-based morphology model. Numerical results show that the asymmetric ripple mat effectively capture the sediment by forced vortex enforced at the apex of asymmetric ripple mat, and bring these trapped sediments back to the beach, which has been regarded to be the driving mechanism of beach stabilization effect of asymmetric ripple mat.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.3
• /
• pp.225-237
• /
• 2001

The community structure of macrobenthos was investigated around Sorido Island, southern coast of Korea between August 1996 and April 1997. Triplicate macrobenthic samples were taken seasonally at twelve stations in August and November 1996 and fourteen stations in February and April 19n by van Veen grab ($0.1m^2$). A total of 217 macrobenthic species were identified during study Period: 80 species were from polychaetes, 60 species from crustaceans, and 46 species from mollusks. The mean density of macrobenthos estimated $1,068 ind/m^2$, and polychaetes comprised $85\%$ of total density. The mean biomass was $110.2 g/m^2$, and echinoderms contributed to more than a half of the biomass. Major dominant species based on abundance were three polychaetes Tharyx sp., Lumbrineris longifolia, and Magelona japonica, which frequently occur in the coastal area enriched by organic pollution. The densities of the species were $582 ind/m^2$, $72 ind/m^2$, and $41 ind/m^2$, respectively. These species showed very low density in the offshore area. The study area was classified into four regions each sustaining specific macrofaunal assemblages by Bray-Curtis cluster analysis: a station group adjacent to the Kwangyang Bay and Yosu harbour and three station groups around Sorido Island. There were negative correlations between the concentration of PAHs in sediments and the abundance of Ampeliscidae spp. and Amphipoda. These results were discussed in terms of both environmental factors and distribution of benthic community.