• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1122-1123
• /
• 2015

본 논문에서는 회전전기자형 고온초전도 발전기의 이중 계자를 제안하고 설계를 하였다. 기존의 동기발전기는 회전자가 계자이지만, 본 논문에서는 전기자를 회전자로 설계하였다. 고정자인 계자는 전기자의 내측과 외측에 위치하게 설계하여 이중계자라고 하였다. 초전도 선재는 제조사에 의해 규격이 정해져있다. 계자에 대전류를 사용하기 위해서는 적층등의 방법들이 있다. 적층하여 구리 권선으로 계자를 권선시 저항과 인덕턴스의 불균등을 제거하기 위하여 구리 권선을 일정한 간격으로 위치를 변환시키는 전위의 방법이 사용된다. 하지만 초전도 선재의 경우는 꺽기, 비틀기등의 방법이 불가능하므로 이 방법을 사용할 수 없다. 그래서 선재를 펀칭하여 선재를 전위시키는 CTCC(Continuously Transposed Coated Conductors) 등의 방법을 사용한다. 본 연구에서는 CTCC 형태의 초전도 권선을 사용하여 기본 모델과 이중계자 권선을 설계하고 특성을 비교하였다. 초전도 선재를 적층하여 사용함으로 계자부의 면적은 증가하지만 인덕턴스, 길이등의 불균등을 제거할 수 있으며 적층 선재수가 증가할수록 계자부 면적은 감소하는 장점이 발생한다.

• Physical Therapy Korea
• /
• v.7 no.4
• /
• pp.8-15
• /
• 2000

이 연구의 목적은 노인들 중, 넘어지는 사람들(fallers)과 안 넘어지는 사람들(nonfallers)의 경부, 체간, 하지의 관절가동범위를 측정하여 비교하는 것이다. 본 연구대상은 남자 6명, 여자 22명, 나이 65세에서 88세의 노인으로 독립적으로 활동할 수 있는 사람들을 두 개의 집단으로 한 사람씩 면접을 통해 분류하였다. 대상자 선정 이전 일년 동안 한번 이상 넘어진 경험이 있는 사람들을 넘어진 사람들로 규정, 그리고 넘어진 경험이 없는 사람들을 안 넘어진 사람들로 정의하였다. 관절가동범위는 각도기로 측정하였고 미국 정형외과 학회(American Academy of Orthopaedic Surgeons)의 표준화된 가동 범위 측정방법을 사용하였다. 넘어진 사람들과 안 넘어진 사람들의 연구 결과의 차이를 알아보기 위하여 양측 독립성 t-검정을 사용했다. 연구결과, 넘어진 사람들과 안 넘어진 사람들간의 관절가동범위 중 흉요부의 굴곡, 신전, 우측굴곡, 좌측굴곡, 그리고 우측회전과 좌측회전, 고관절부의 신전, 내전, 외측회전과 내측회전, 그리고 족관절의 배굴에서 유의한 차이가 있었다. 이와 같은 결과는 체간, 고관절부 그리고 발목의 유연성이 노인들의 균형을 유지하는데 영향을 준다고 말할 수 있다.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.2
• /
• pp.160-166
• /
• 2012

Purpose: The aim of this study was to determine the patterns of the stress distribution within the reconstructed anterior cruciate ligament (ACL) double bundles in response to an anterior tibial load and rotatory load at $45^{\circ}$ flexed knee model by use of a 3-dimensional finite element analysis (FEM). Materials and Methods: The $0^{\circ}$ and $45^{\circ}$ flexed 3-D knee model were reconstructed based on the high resolution computed tomography (CT) images from the right knee of a healthy male subject. To simulate double bundle ACL reconstruction, in $0^{\circ}$ analytic model, four 7 mm diameter tunnels were created at the center of each anteromedial (AM) and posterolateral (PL) footprints on the femur and tibia. The grafts were inserted into the corresponding bone tunnels and then reconstructed knee model was flexed to $45^{\circ}$. As a next step, the 5 mm anterior tibial load and internal rotational load of $10^{\circ}$ were applied on the final Computer aided design (CAD) model. And then stress patterns of each bundle were assessed using a finite element analysis. Results: In response to the 5 mm of anterior tibial load, the AM bundle showed increased stresses around the tibial and femoral attachment sites; especially in the anterior aspect of the bundle. In the PL bundle, the highest stress concentration was also noticed on the anterior aspect of the bundle. Under $10^{\circ}$ internal rotational load, the stress concentration was predominant around the anterior aspect of the tibial attachment site within the AM bundle. The PL bundle also showed highest stress concentration on the anterior aspect of the bundle. Conclusion: Although the stress patterns were not identical among the AM and PL bundle, there were common trends in the stress distribution. The stress concentration was predominant on the anterior aspect of both bundles in response to the anterior tibial load and rotatory load.

• Journal of radiological science and technology
• /
• v.28 no.3
• /
• pp.203-209
• /
• 2005

Objective True lateral scapular image was very important to diagnosis the scapular fracture and dislocation induced by traumatic injury. The aim of this study was to know the patient rotation angle to be showing the scapular true lateral in Korean. Subjects and Materials Thirty patients(22men, 8 women, mean ages 53.4)with scapular pain, had supine anteroposterior projection taken with $32^{\circ}$, $37^{\circ}$, $42^{\circ}$ trunk rotation angle changing the manual angulation material. Radiographs were evaluated independently by 5 experienced observers(1 orthopedics surgery specialist, 1 diagnostic radiology specialist, 3 radiological technologist) They assessed overlab of vertebral border and axillary border of scapular as follows; Totally overlapping of vertebral border and axillary border is 4, partially overlapping is 3, not overlapping is 2 and oblique location with two borders is 1. All observers scored using by PACS monitor. Results $32^{\circ}$ trunk rotation was scored $1.53{\pm}0.39$, $37^{\circ}$ trunk rotation was scored $3.83{\pm}0.15$ and $42^{\circ}$trunk rotation was scored $2.17{\pm}0.43$. There was no difference(p<0.05) between group of more than 100cm of the girth of the chest and group of less than 100cm. Similarly, men and women group showed no difference(p<0.05) with trunk rotation statistically. Conclusions There was no result of trunk rotation angle to radiograph the true scapular lateral image up to date. This studies were summarized as follows; Adaptation of $37^{\circ}$ trunk rotation was the best to show the true scapular lateral image in Korean. Our results were very useful to get the true scapular lateral images in clinic.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 2009.03a
• /
• pp.189-190
• /
• 2009

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.164-173
• /
• 2009

Purpose: The purpose of this study was to evaluate the effect of abutment material on screw-loosening before and after cyclic loading. Among the different materials of abutments, zirconia and metal abutment were used. Material and methods: Two types of implant systems: external butt joint(US II, Osstem Implant, Korea) and internal conical joint(GS II, Osstem Implant, Korea) were used. In each type, specimens were divided into two different kinds of abutments: zirconia and metal(n=5). The implant was rigidly held in a special holding to device ensure fixation. Abutment was connected to 30 Ncm with digital torque gauge, and was retightened in 30 Ncm after 10 minutes. The initial removal torque values were measured. The same specimens were tightened in 30 Ncm again and held in the cycling loading simulator(Instron, USA) according to ISO/FPIS 1480. Cycling loading tests were performed at loads 10 to 250 N, for 1 million cycles, at 14 Hz,(by subjecting sinusoidal wave from 10 to 250 N at a frequency of 14 Hz for 1 million cycles,) and then postload removal torque values were evaluated. Results: 1. In all samples, the removal values of abutment screw were lower than tightening torque values(30 Ncm), but the phenomenon of the screw loosening was not observed. 2. In both of the implant systems, initial and postload removal torque of zirconia abutment were significantly higher than those of metal abutment(P<.05). 3. In both of the implant systems, the difference in removal torque ratio between zirconia abutment and metal abutment was not significant(P>.05). 4. In metal abutments, the removal torque ratio of GS II system(internal conical joint system) was lower than that of US II system(external butt joint system)(P<.05). 5. In zirconia abutments, the difference in removal torque ratio between the two implant systems was not significant(P>.05). Conclusion: Zirconia abutment had a good screw joint stability in the condition of one million cycling loading.

• Journal of the Korean Orthopaedic Association
• /
• v.55 no.1
• /
• pp.95-100
• /
• 2020

In general, most knee dislocations are reduced easily by simple traction. In rare cases, closed reduction of the knee dislocation is attempted, but ruptured ligaments or muscles are stuck in the joints and cannot be reduced. The cases of this irreducible knee dislocation have sometimes been reported. The authors encountered a case of irreducible knee posterolateral rotational dislocation that was not reduced by simple traction and report it along with a review of the literature. This case provides an opportunity for clinicians to examine the clinical considerations when experiencing an irreducible knee dislocation.

• Journal of the Korean Society of Radiology
• /
• v.81 no.1
• /
• pp.2-20
• /
• 2020

MRI is a valuable imaging technique for the evaluation of intraarticular diseases. Accurate interpretation of joint MRI necessitates sound knowledge of anatomy. In the field of joint anatomy, in addition to the discovery of new structures, previously reported joint components of unexplained function are also detected. In this review, joint anatomy researched actively over the last decade is discussed. Joint components including the rotator cable and the superior capsule of the shoulder, posterolateral corner and the anterolateral ligament complex of the knee, and the distal tibiofibular syndesmosis of the ankle joint are introduced and correlated with their MRI features.

• Journal of the Korean Applied Science and Technology
• /
• v.39 no.5
• /
• pp.701-709
• /
• 2022

The purpose of this study was to compare the differences according to the visual selection and rotation order during sequential rotational jump for female dancers of a Korean ballet company by classifying them into take-off and landing sections. 10 subjects (age: 26.0±2.9 yrs, height: 163.4±3.3 cm, weight: 46.8±3.6 kg, ballet career: 12.3±5.9 yrs) participated in the study. Using a 3D motion analyzer and a force platform, the height of the body center and the ground reaction force during take-off and landing were measured. According to the visual condition (using both eyes, using left eye, using right eye) and rotation order (first rotation, second rotation), it was analyzed through repeated measurement two-way analysis. Height of the CM was higher in the first jump. In take-off, Fx was lateral force of left foot and medial force of right foot were strong in second rotation, and Fy was forward force was strong in first rotation of right foot. Fz was no significant. In landing, Fy showed backward force was strong when landing the second time from the left foot, and the backward force was strong when using the left sight from the right foot. Fz was strong on the second landing on the left foot and the first landing on the right foot.

• Journal of the Korean Arthroscopy Society
• /
• v.16 no.2
• /
• pp.128-133
• /
• 2012

Purpose: This study examined the relationship between graft appearance on follow-up magnetic resonance imaging (MRI) and knee stability after double bundle anterior cruciate ligament (ACL) reconstruction. Materials and Methods: For each patient, 1.5 tesla MRI's were obtained. The signal intensity of grafts was divided into 3 grades by Sononda's classification. The course of grafts was divided into two patterns: straight and curved. We assessed Lachman test, KT 2000 arthrometer and anterior drawer stress radiograph using Telos$^{(R)}$ in $30^{\circ}$ knee flexion for anterior stability and evaluated pivot shift test for rotatory stability. The correlation between graft appearance on MRI and the results of knee stability tests was evaluated. Results: The anteromedial (AM) graft was evaluated as being grade 1 in 66.7%, grade 2 in 26.7%, and grade 3 in 6.7% of the cases and the posterolateal (PL) graft was assessed as being grade 1 in 63.3%, grade 2 in 33.3%, and grade 3 in 3.3% of the cases according to the signal intensity. The AM graft was evaluated as being straight in 83.3% and curved in 16.7% of the cases, and the PL graft was assessed as being straight in 86.7% and curved in 13.3% of the cases according to the course. The course of AM graft was correlated with the results of anterior stability tests and the course of PL graft was correlated with the result of rotatory stability test. However, the signal intensity of grafts was not correlated with the results of anterior stability and rotatory stability tests. Conclusion: The course of AM is correlated with anterior stability and the course of PL is correlated with rotatory stability on follow-up MRI after double bundle ACL reconstruction.