• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.1
• /
• pp.271-281
• /
• 2005

The effects of radiation damping is used to compensate the truncated boundary which is relatively close to the structure-fluid interface in the fluid element surrounding the submerged structures. An efficient ring element is presented to model the shell and fluid element which fully utilizes the characteristics of the axisymmetry. The computational model uses the technique which separate the meridional shape and circumferential wave mode and gets similar result with the exact solution in the eigenvalues and the earthquake analysis. The fluid-structure interaction techniques is developed in the finite element analysis of two dimensional problems using the relations between pressure, nodal unknown acceleration and added mass assuming the fluid to be invicid, incompressible and irrotational. The effectiveness and efficiency of the technique is demonstrated by analyzing the free vibration and seismic analysis using the added mass matrix considering the structural deformation effect.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.7
• /
• pp.448-457
• /
• 2010

Vibrations and wave propagations in waveguide structures can be analysed efficiently by using waveguide finite element (WFE) method. The WFE method only models the 2-dimensional cross-section of the waveguide with finite elements so that the size of the model and computing time are much less than those of the 3-dimensional FE models. For cylindrical shells or pipes which have simple cross-sections, the external coupling with fluids can be treated theoretically. For waveguides of complex cross-sectional geometries, however, numerical methods are required to deal with external fluids. In this numerical approach, the external fluid is modelled by the boundary elements (BEs) and connected to WFEs. In order to validate this WFE/BE method, a pipe submerged in water is considered in this study. The dispersion diagrams and point mobilities of the pipe simulated are compared to those that theoretically obtained. Also the acoustic powers radiated from the pipe are predicted and compared in both cases of air and water as an external medium.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.981-983
• /
• 2005

자성유체를 이용하여 동작하는 선형 펌프를 개발하였다. 자성유체의 자기적 성질을 이용하여 구동하는 선형펌프로 일반 펌프에 비해 조가 간단하고, 진동/소음이 작다는 장점이 있다. 또한 외부에서 인가하는 자기장의 조절만으로 펌프를 조절할 수 있다. 개발한 펌프는 자성유체의 관내에서의 형상에 따라 펌핑력이 매우 달라진다. 따라서 외부에서 인가하는 자기장에 의해 형성되는 자성유체의 형상을 해석하고, 이로 인해 형성되는 자성유체에 의해 발생하는 펌핑력을 측정하고 비교하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.3
• /
• pp.142-150
• /
• 2012

The waveguide finite element (WFE) method is a useful numerical technique to investigate wave propagation along waveguide structures which have uniform cross-sections along the length direction ('x' direction). In the present paper, the vibration and radiated noise of the submerged pipe with fluid is investigated numerically by coupling waveguide finite elements and wavenumber boundary elements. The pipe and internal fluid are modelled with waveguide finite elements and the external fluid with wavenumber boundary elements which are fully coupled. In order to examine this model, the point mobility, dispersion curves and radiated power are calculated and compared for several different coupling conditions between the pipe and internal/external fluids.

• Applied Chemistry for Engineering
• /
• v.16 no.2
• /
• pp.238-242
• /
• 2005

In this work, Polydimethylsiloxane (PDMS) and SU-8 (Microchem, USA) photoresist were used to make the microchannel by soft lithographic method. To investigate the effects of external voltages and widths of the microchannel, we made the microchannel by soft lithographic method. To investigate the effects of external voltages and widths of the microchannel, we made the microchannel with various widths: $100{\mu}m,\;200{\mu}m$ and $300{\mu}m$. And each micorchannel was supplied with external voltage, respectively. As a result, the fluid velocity increased with an increase of the external voltage at the same width. It was speculated that the electrical double layer was condensed and the zeta potential increased with increase of the external voltage. The fluid velocity increased with the microchannel width increase at the same external voltage. It is concluded that the resistance in the microchannel decreased as the microchannel width increased.

• The Korean Journal of Rheology
• /
• v.6 no.2
• /
• pp.129-138
• /
• 1994

공압출되는 sheet die에서 고분자 물질의 비등온 유동유동을 수치모사하였다. 유변학 적 식으로 power-law model을 사용하였고, 격자생성법을 이용한 유한차분법을 사용하였다. 수치계산을 통해 수축채널에서의 온도 분포를 구해보고 점도가 채널에서의 온도 분포를 구 해 보고 점도가 채널에서의 압력강하 및 신장속도에 미치는 영향을 알아보았다. 압력강하는 외부 유체의 점도 및 heat dissipation의 영향을 크게 받았다. 신장속도는 외부 유체의 점도 가 증가함에 따라 커진 반면 내부 유체의 점도가 증가함에 따라 커진반면, 내부 유체의 점 도증가에 따라 감소하였고, heat dissipation에 의해 증가하였다.

• Korean Chemical Engineering Research
• /
• v.43 no.1
• /
• pp.92-97
• /
• 2005

In this study, the effect of contact angles of PDMS and external voltage has been investigated. SU-8 (Microchem, USA) negative photoresist and PDMS are used to make the microchannel. The contact angle of the native PDMS is $105^{\circ}$. The native PDMS is treated with the oxygen plasma and the contact angle changes $19^{\circ}$, $46^{\circ}$ and $69^{\circ}$. As a result, the rate of increase in flow velocity is not directly proportional to the rate of increase of external voltage. This is because the electrical double layer is condensed and the zeta potential is increased with an increase of the external voltage. The flow velocity is highest for the contact angle of $19^{\circ}$ at the same external voltage. Hence we conclude that the thickness of electrical double layer and flow velocities vary with contact angle at the same external voltage.

• 한국해양학회지
• /
• v.28 no.1
• /
• pp.17-23
• /
• 1993

A right cylindrical tank with sloping bottom and top (${\beta}-effect$) is filled with two-layered fluid and is put on the rotating table. External fluid of same density as the lower-layer fluid is continuously injected to drive the lower-layer current. By minimizing the interfacial stress between two layers the motion in the lower-layer deformed the shape of interface such that the upper-layer adjust itself to the variations of the interface in terms of its direction of flow patterns .The most significant parameter is the internal Froude Number($F_1$) and when $F_1$ is greater than 6 two-cellular circulation of the upper-layer changes its direction, there by creates a separation of Western boundary current. The separation position moves to the most northward when $F_1$ equals to 6.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.428-431
• /
• 2001

토목합성재료(Geosynthetics) 중 배수용으로 사용되는 재료는 기능상 유체의 흐름을 수평방향으로 유도하는 재료를 의미하며, 일반적으로 저장된 유체를 수직으로 이동시키는 필터기능을 가지는 1,000g/㎡ 미만의 지오텍스타일(geotextiles)과 수평방향의 유도로를 확보한 지오네트(geonets)를 결합시킨 지오네트 복합제품이 사용되고 있다. 이러한 배수용 토목합성재료는 쓰레기 매립장의 건설 시 침출수의 외부유출을 차단하기 위하여 설치하는 차수막인 지오멤브레인(geomembranes)을 매립된 쓰레기 하중 및 외부의 충격으로부터 보호하는 용도로 사용된다. (중략)

• Journal of the Korean Magnetics Society
• /
• v.11 no.6
• /
• pp.245-249
• /
• 2001

Natural convection of a magnetic fluid is different from that of Newtonian fluids because magnetic body force exists in an addition to gravity and buoyancy. In this paper, natural convection of a magnetic fluids (W-40) in annular pipes was studied by experimentally. Inside wall was kept at a constant temperature (25 $^{\circ}C$), and outside wall was also held at a constant but lower temperature (20 $^{\circ}C$). The magnetic fields of various magnitude were applied up. This study has resulted in the following fact that the natural convection of a magnetic fluids was controlled by the direction and intensity of the magnetic fields.