• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.3
• /
• pp.1-9
• /
• 2024

This study proposes a multi-scale template matching technique with image pyramids (TMI) to measure structural dynamic displacement using a vision sensor under atmospheric turbulence conditions and evaluates its displacement measurement performance. To evaluate displacement measurement performance according to distance, the three-story shear structure was designed, and an FHD camera was prepared to measure structural response. The initial measurement distance was set at 10m, and increased with an increment of 10m up to 40m. The atmospheric disturbance was generated using a heating plate under indoor illuminance condition, and the image was distorted by the optical turbulence. Through preliminary experiments, the feasibility of displacement measurement of the feature point-based displacement measurement method and the proposed method during atmospheric disturbances were compared and verified, and the verification results showed a low measurement error rate of the proposed method. As a result of evaluating displacement measurement performance in an atmospheric disturbance environment, there was no significant difference in displacement measurement performance for TMI using an artificial target depending on the presence or absence of atmospheric disturbance. However, when natural targets were used, RMSE increased significantly at shooting distances of 20 m or more, showing the operating limitations of the proposed technique. This indicates that the resolution of the natural target decreases as the shooting distance increases, and image distortion due to atmospheric disturbance causes errors in template image estimation, resulting in a high displacement measurement error.

• Journal of Korea Society of Industrial Information Systems
• /
• v.7 no.1
• /
• pp.10-15
• /
• 2002

It is presented to extended to an interaction matrix formulation to the problem of system and disturbance identification for a plant that is corrupted by both process and output disturbances. With only an assumed upper bound on the order of the system and an assumed upper bound on the number of disturbance frequencies, it is shown that both the disturbance-free model and disturbance effect can be recovered exactly from disturbance-corrupted input-output data without direct measurement of the periodic disturbances. The rich information returned by the identification can be used by an iterative learning or repetitive control system to eliminate unwanted periodic disturbances. Those can be helped to apply to the multiple dynamic systems for precision quality assurance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.503-505
• /
• 1986

주어진 제어대상 모델에 대하여 제어기를 구성하여 실제로 적용하는 경우 모델의 불일치, 모델링에서 고려하지 않은 외란(disturbance), 측정잡음등에 의하여 성능이 설계시와 달라진다. 실제적용에서도 성능을 계속 유지하기 위하여 제어기는 안정성, 계수변화(parameter variation)에 대한 강인성(robustness), 외란상쇄(disturbance rejection) 및 측정잡음에 둔감함등의 특성을 가져야 한다. 귀환(feedback)을 사용하여 제어기를 구성하는 경우 위의 모든 조건을 만족 시킬 수 없으므로 제어목적에 따라 적당한 조건을 선정하여 중요한 특성을 주로 갖게 한다. 본 논문에서는 쌍동선(small waterplane area twin hull ship-SWATHS)에 대하여 PID, LQ, LQG 제어기를 구성하여 안정성, 계수 변화에 대한 강인성, 외란 상쇄 및 측정잡음의 영향을 비교하였다. 쌍동선의 경우 다른 단동선(mono hull ship)에 비하여 접수면(waterplane)이 적으므로 무게증변을 흡수할 수 있는 복원력이 약하여 적은 외력에도 상하동요(heave)와 종동요(pitch)가 심하게 일어난다. 이러한 동요를 줄이는 것이 쌍동선의 제어목적이다. 본 연구에서는 먼저 선형화된 수직축 운동방정식을 이용하여 선체운동의 모델을 구했으며 중첩의 원리(super-position theorem)에 의하여 주파수 응답의 합으로 파도입력을 모델링 하였으며 제어를 위하여 필요한 측정치는 IMU(Inertial Measurement Unit)에서 제공된다고 가정하였다. 쌍동선의 동요의 원인은 파도, 바람, 조류 등이 있으나 파도에 의한 영향이 가장 크므로 본 논문에서는 파도에 의한 영향만을 고려하였다. 파도는 쌍동선에 외란으로 작용하며 측정할 수 없는 양이므로 PID, LQ 제어에서는 제어모델에 포함되지 않지만 LQG 제어에서는 제어모델에 포함된다. LQG 제어의 경우 제어모델에 파도를 백색잡음으로 가정하고 제어기를 구성한 것 (LQG1)과 2차의 쉐이핑필터(shaping filter)를 사용하여 구성한 것(LQG2)으로 나누었다.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.424-427
• /
• 2017

Smith predictor can't be applied to the time delay systems that have poles near the origin or a pure integrator or a modeling error, because of occurring the steady state error for the step disturbance. In this paper, a new Smith predictor controller for these systems is designed to eliminate the effects of the disturbance. A disturbance observer to estimate a disturbance is proposed and a new controller is designed using the estimated disturbance. As a result, the new controller can eliminate the effects of the disturbance and modeling error. The simulation results for the steam superheater and the steam pressure systems verify the efficiency of the proposed controller.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.233-235
• /
• 2003

The realization for power measurement system to analyze and improve the external distortion with DSP is presented. The system is composed of RF, DSP and communication module, and take the Wigner distribution algorithm to remove the external distortion. The experiment result has SNR as $\pm$0.5dB to be improved than existing system.

• Bulletin of the Korean Space Science Society
• /
• 2005.04a
• /
• pp.138-142
• /
• 2005

A reaction wheel, an actuator for satellite attitude control, produces disturbance torque and force as well as its axial control torque. The disturbances have an influence on the pointing stability of high precision satellites. The measurement of disturbances for such a satellite, therefore, is necessary. The wheel's rotation, however, causes the vibration of the table and its vibration induces measurement errors, especially large near the resonance frequency of the Measurement table. For the purpose of overcoming these defects, a calibration method using frequency compensation is suggested in this paper. Disturbance parameters are identified from data examined by frequency compensation. Measurement frequency range can be expanded far higher than the resonance frequency, since the degradation of data accuracy caused by its vibration is well alleviated even in the resonance area.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1831_1832
• /
• 2009

본 논문에서는 유연관절 로봇 팔 제어를 위한 토크센서 기반의 외란에 강인한 제어기 설계를 다루고 있다. 로봇은 관절의 토크센서를 통해 관절에서 발생하는 토크의 측정이 가능하며 외란에 강인한 제어기 설계를 위해 외란 관측기가 적용 되었다. 외란관측기는 시스템에 작용하고 있는 외란을 상쇄하는 역할을 한다. 본 논문에서 설계된 제어기의 성능은 컴퓨터 모의실험을 통하여 확인하도록 한다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.11
• /
• pp.860-867
• /
• 2003

This paper presents a systematic method measuring a velocity disturbance to design the robust seek loop system of optical disk drives. The velocity disturbance caused by the rotation of a disk has a greater influence on the performance of the seek control loop as the rotational speed increases. Thus, it needs to measure the extent of the velocity disturbance and design the seek control loop based on the measured data. The measurement method of the velocity disturbance is a real-time . method using a measurable velocity and a velocity controller output and is a robust method considering actuator uncertainties. The loop gain adjustment algorithm is introduced to compensate for the actuator uncertainties. The proposed method is implemented by an experimental digital system and is evaluated through an experiment.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.174-175
• /
• 2010

본 논문에서는 wavelet 변환을 이용하여 태양광 발전 시스템의 외란을 측정하는 방법을 연구하였다. MLD(Multi-Level Decomposition) 기법을 이용하여, 계산량이 적으면서도 빠른 시간내에 외란의 종류와 크기를 알아낼 수 있다. Wavelet 이론 소개와 컴퓨터 모의실험, DSP 제어기를 이용한 실험 결과로서 본 연구의 타당성을 입증하였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.4 no.1
• /
• pp.58-62
• /
• 1999

This paper shows that is possible to identify the system's input-output dynamics exactly in the presence of unknown periodic disturbances for the Active Engine Mount Control Application .The disturbance frequencies and waveforms can be completely unknown and arbitrary. Only measurements of a control excitation signal and the disturbance-contaminated response are used for identification. Examples are given to illustrate the method, including the identification and vibration control of active engine mount for automobile.