• Journal of Ethics
• /
• no.74
• /
• pp.35-62
• /
• 2009

This study purports to explore the possibility of establishing the theory of ethics education based on the concept 'Gyeong(敬)' in Early Confucianism. There was a negative viewpoint on Confucianism directly after the modernization of Korea. However, a positive trend for Confucianism has emerged in almost all sorts of studies even though the results of the studies in Moral education are not always successful. West moral education theories and traditional ethics education theories should be integrated dialectically so that traditional ethics education may be updated. Recently a reappraisal of traditional values has been undertaken as a replacement of liberal democracy values. Faced with the modern civilization's crisis and a decline in morals in Korea, reverence needs to be dealt with in ethics education. This study is primarily concerned with the nature-transcendental relation whose concrete concept is 'Gyeong(敬)' in Confucianism. And the study attempts to put forward the theory of reverence-centered ethics education. The contents of the study consists of the substance of 'Gyeong(敬)' in Early Confucianism, and practical principles and methods of reverence-based ethics education. Some tasks of moral education are also suggested for the scientific establishment of reverence-centered ethics education.

• Elastomers and Composites
• /
• v.48 no.4
• /
• pp.300-305
• /
• 2013

Part shrinkage in injection molding is inevitable phenomenon. Thus, it is necessary not only study on the reducing part shrinkage but characterization of part shrinkage. In this study, part shrinkage in injection molded 2.5 dimensional annular shaped specimens has been studied using glass fiber reinforced PC. Annular shaped specimens were designed with various sizes of outer diameter and thickness. Injection temperature, packing time and packing pressure were selected for operational conditions. Profile variations of outer and inner diameters of molded specimens for various operational conditions were investigated. Sizes of outer and inner diameters of injection molded specimens were smaller than the sizes of mold. Part shrinkage decreased as outer diameter and thickness increased. Part shrinkage showed anisotropic behavior and it depended upon gate location. Subsequently, molded specimens were not circular but oval in shape, and showed the largest shrinkage in the direction of gate. It was realized that the mold design such as gate design is important to control the shape of molded products.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.9
• /
• pp.1248-1254
• /
• 2000

Multiple external carotid artery aneurysms with neurofibromatosis are rare. Trauma is the primary cause in the development of aneurysms of the external carotid artery. A 39-year-old female patient was referred to the emergency room because of a headache and a huge lump over the left temporo-parieto-occipital region. The physical examination revealed a huge round mass, $5{\times}15{\times}18cm$, in the left temporo-parieto-occipital region and low set left ear and multiple caf au lait spots in trunk and extremities. The external carotid artery angiography demonstrated multiple aneurysms arising from the superficial temporal artery and occipital artery. A MRI showed a huge hematoma on temporo-parieto-occipital region and postauricular mass suggested of subcutaneous neurofibroma. Embolization followed by surgical resections of those aneurysms and neighboring mass were performed and good result was obtained. We report our case with review of literature.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.149-149
• /
• 2017

본 논문은 생산라인 자동화를 위한 로봇으로 제조업 시장 확대에 가장 큰 걸림돌이 되는 가격 경쟁력 및 인력난 해소를 위해 설계하였으며 다양한 소재에 대응하기 위해 그리퍼를 교체하여 적용이 되도록 하였다. 자동화를 위한 로봇은 소재의 내외경 가공 및 검사까지 모든 공정이 일괄적으로 이루어 져야하며 LCD 모니터에 생산수량 및 불량률 등의 정보를 실시간으로 나타내어 효율적인 생산계획을 수립할 수 있도록 하였다. 생산라인 자동화를 위해 로봇의 설계는 Auto CAD를 이용하였다. 부품의 가공은 CNC에 적용하기 위해 자동공급장치를 설계하였다. 가공이 완료된 후 측정한 값을 LCD모니터를 통하여 작업자가 알아볼 수 있게 나타냈다. 외경 1은 40.405, 외경2는 32.201, 내경 1은 23.346, 내경 2는 34.302로 나타났다. 측정결과 불량 측정을 위해 측정부의 결과 값이 나타나며 불량이 발생하면 그래프를 이용하여 어떤 부위에서 발생했는지를 알 수 있도록 하였다. 또한 결과 값은 자동으로 저장되도록 하였다. 생산라인 자동화를 위해 100EA를 측정한 결과 외경 1은 40.40438, 외경2는 32.20164, 내경 1은 23.34830 내경 2는 34.30033의 평균값을 나타냈다. 측정값의 검증은 하이트게이지로 측정한 결과 0.003 이내의 결과를 나타냈다. 따라서 본 로봇 자동화 시스템을 적용한다면 생산성 향상 및 불량률 감소가 가능하여 인력대체 및 가격경쟁력이 가능하다고 판단된다.

• Journal of the Daesoon Academy of Sciences
• /
• v.10
• /
• pp.423-458
• /
• 2000

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.89-97
• /
• 2007

Objective: The purpose of this study was to measure the insertion torque of orthodontic miniscrews regarding changes in their shape, diameter, and length. Methods: Torque values were measured during continuous insertion of the miniscrews into solid rigid polyurethane foam, using a torque tester of driving motor type with a regular speed of 3 rpm. Orthodontic miniscrews (Biomaterials Korea, Seoul, Korea) of cylindrical type and taper type were used. Results: Increasing the length and diameter of the miniscrews increased the maximum insertion torque value in both cylindrical and taper type screws. Insertion torque was increased at the incomplete head of the cylindrical type screw, and at the tapered part of the taper type screw. The insertion torque value of miniscrews was influenced most by diameter, then shape and length. As a result, it was shown that the diameter of the screw had the most influence on insertion torque, and the taper type screw had a higher torque value than the cylindrical type screw. Conclusion: Therefore, a large diameter or taper type screw are adequate for areas of thin cortical bone with a large interdental space, and a small diameter or cylindrical type screw are adequate in the mandibular molar area or the midpalatal area having thick cortical bone.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.323-324
• /
• 2009

• Journal of Welding and Joining
• /
• v.19 no.3
• /
• pp.261-266
• /
• 2001

본 고에서는 배관 재료일반과 용접공정에 대해 ERW강관을 중심으로 알아보았다. 국내 가스배관에서 ERW강관이 사용되는 것은 외경 24인치 이하 배관이며 그 이상 크기의 배관에서는 SAW강관이 사용된다. 배관의 안전성 및 건전성 확보를 위하여 가장 주의를 가지고 평가해야 할 대상은 손상 및 결함의 발생 비율이 가장 높은 심용접부 및 원주용접부 이다. 이들 배관 용접부의 건전성 확보를 위해서는 모재와는 다른 특성을 지닌 용접부위에서 다양한 금속학적, 역학적 인자들의 영향에 대한 정확한 분석과 평가를 실시하여야 한다. 용접부위 품질확보는 가스배관의 안전과 안정적운용에 반드시 필요한 부분이다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.4
• /
• pp.41-52
• /
• 2014

In this paper, O-ring size measurement algorithm based on a small machine vision inspection equipment which can replace a expensive and large machine vision inspection equipment is presented. The small machine vision inspection equipment acquires a image from a CCD camera shooting a measurement plane which located on a back light and the proposed size measurement algorithm is apply to the image. For improvement of size measurement accuracy, camera lens distortion correction and perspective distortion correction are conducted by software technique. Consider O-ring's shape, ellipse fitting model is applied. In order to increase the reliability of ellipse fitting, RANSAC algorithm is applied.

• The tire
• /
• s.111
• /
• pp.20-29
• /
• 1984

유한요소법에 의하여 축대칭 정적하중을 받는 승용차용 래디알 타이어의 변형을 해석하였다. 요소는 8절점 parabolic-isoparametric 요소를 사용하였으며 타이어를 구성하는 cord-rubber복합체를 선형직교성을 갖는다고 가정하고, 그 복합체의 물성치를 간단한 식으로 표시하여 적용하였다. 공기압으로 인해 변형된 모양 및 cord에 작용하는 장력을 계산해 냈으며 이 변형된 모양을 plaster cast를 이용하여 측정한 실험치와 비교하였다. 또 타이어를 구성하는 구조가 달라지면 공기압으로 인하여 변형형태가 어떻게 변화하는가를 계산해 보았다. 이 결과로 belt의 cord수가 감소하거나 belt cord angle이 증가하면 타이어 외경이 증가함을 알 수 있다.