• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1308-1315
• /
• 2009

A full-polarimetric scatterometer(HPS: Hongik Polarimetric Scatterometer) for X-band is designed, fabricated, and verified using the theoretically well-known point-targets in this paper. The X-band full-polarimetric scatterometer consists of an OMT(Orthogonal-Mode Transducer)+horn antenna, the angle control part for the OMT+horn antenna, a transmitter/receiver with a network analyzer and a frequency-conversion circuitry, and a movable support of these parts. We use an inclinometer sensor to control the vertical and horizontal incidence angles. The full polarimetric data can be obtained because of the polarization switches and the OMT. The accuracy of the scatterometer system is verified by measuring the polarimetric RCS(Radar Cross Section) of one of the theoretically well-known point-targets, i.e., a corner reflector.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.2
• /
• pp.207-216
• /
• 2007

The flexural behavior of steel composite beam with built-up cross-section by bolt connection is presented in this paper. The composite effect due to bolt-connetion and friction between steel plate are considered to investigate the flexural behavior of steel composite beam. The displacement, bending stresses and shear stresses according to composite rate are calculated by F.E. analysis and these results are compared to the analytical values of non interaction beam and full interaction beam. As a result of analysis, the behavior of composite beam is more dependant on the composite rate than the friction of the steel plate. When the composite rate reaches $50{\sim}60%$, the behavior of composite beam is similar to that of fully composite beam.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.4
• /
• pp.93-97
• /
• 1996

The Total Least Squares(TLS) method is an unbiased estimator for solving overdetermined sets of linear equations Ax${\simeq}$b when errors occur in all data. However, as well as Least Squares(LS) method it doesn't show robustness while the errors have a heavy tailed probability density function. In this paper we proposed a robust method of TLS (Robust TLS, ROTLS) based on the characteristics of TLS solution. And the ROTLS is verified by applying it to system identification problems.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.7 s.349
• /
• pp.1-6
• /
• 2006

We show for the first time the optical properties of the selectively oxidized vertical cavity laser (VCL) - depleted optical thyristor (DOT), which has not only a low threshold current, but also a high sensitivity to the optical input light. In order to analyze their switching characteristics, nonlinear s-shaped current-voltage characteristics are calculated and the reverse full-depletion voltages (Vneg's) are obtained as function of semiconductor parameters by using a finite difference method (FDM). The selectively oxidized PnpN VCL-DOT clearly shows the nonlinear s-shaped current-voltage and lasing characteristics. A switching voltage of 5.24 V, a holding voltage of 1.50 V, a spectral response at 854.5 nm, and a very low threshold current of 0.65 mA is measured, making these devices attractive for optical processing applications.

• Proceedings of the KSEG Conference
• /
• 2000.04a
• /
• pp.231-236
• /
• 2000

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.4
• /
• pp.67-74
• /
• 2007

Many studies for slope stability studies have indicated that the infiltration of rainwater into a slope decrease the slope stability. In order to minimize damage caused by slope failure, most design codes suggest that the slope stability be analyzed by saturated condition during rainy season. However it would be excessively conservative condition that every soil slope is saturated in rainy season irrespective of rainfall intensity, soil type and slope geometry. In addition, because most soil slopes are in an unsaturated state, it is necessary to consider the unsaturated characteristics of slope. This paper suggests a prediction method of saturation time for the weathered granite soil slopes due to rainfalls. The finite element analysis of transient water flow through unsaturated slope was used to investigate effects of soil-water characteristics, permeability at saturation, slope geometry, and rainfall intensity. From the result of these analyses, the prediction charts considering soil-water characteristics, permeability at saturation, and slope height were proposed in this study. It is possible to the time required to be saturated slope after rainfall.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.154-155
• /
• 2002

완전 광 3R(Retiming, Reshaping, Reamplification) 재생기는 WDM 시스템과 광 네트워크의 크기를 확장시키기 위하여 필요한 매우 중요한 소자이다. 완전 광 3R 재생기의 구현에서 입력 광 신호로부터 광 클락 추출은 가장 핵심적인 요소이다. 이러한 광 클락 추출을 위하여 모드락 레이저 다이오드와 다중 전극 DFB 레이저에서 self-pulsating 현상을 이용하는 방법이 많이 연구되고 있다. 독일의 HHI는 다중 전극 DFB 레이저에서 self-pulsating 현상을 이용하여 80 GHz 초고속 광 클락 추출과 25-82 GHz 전기적 튜닝 특성을 보였다. (중략)

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.12-15
• /
• 2001

본 논문에서는 고효율 멀티미디어 프로세서 아키텍쳐에 대해 논의하였다. 제안한 멀티미디어 프로세서 아케텍쳐는 제안한 방법은 기존의 멀티미디어 프로세서의 단점들인 각종 텍스트, 사운드, 비디오 등의 미디어 들을 1개의 칩 속에서 처리할 수 있도록 하였으며, 또한 멀티미디어의 특성인 상호대화식 처리도 가능하게 하였다. 특히, 완전한 그래프에 기반을 둔 네트워크를 지향하므로 소프트웨어 없이 메모리 맵의 노드어드레싱을 가능하게 하였으며, 데이터 형태에 의존하는 완전한 재구성이 가능하며 동기/비동기를 갖는 시간 공유와 공간 공유 처리가 가능하다. 또한, 연속적임과 동적인 매체 데이터의 버스 충돌을 방지할 수 있으며 지역적임과 전반적인 공유 메모리 구조로부터의 버스 충돌도 방지할 수 있으며, 또한 가상현실과 흔합현실에도 적용할 수 있으리라 사료된다.

• Progress in Medical Physics
• /
• v.15 no.2
• /
• pp.70-76
• /
• 2004

The most important work for early detection of liver cancer and decision of its characteristic and location is good segmentation of a liver region from other abdominal organs. This paper proposes a fully automatic liver segmentation algorithm based on the abdominal morphology characteristic as an easy and efficient method. Multi-modal threshold as pre-processing is peformed and a spine is segmented for finding morphological coordinates of an abdomen. Then the liver region is extracted using C-class maximum a posteriori (MAP) decision and morphological filtering. In order to estimate results of the automatic segmented liver region, area error rate (AER) and correlation coefficients of rotational binary region projection matching (RBRPM) are utilized. Experimental results showed automatic liver segmentation obtained by the proposed algorithm provided strong similarity to manual liver segmentation.

• Journal of the Korea Convergence Society
• /
• v.11 no.10
• /
• pp.71-79
• /
• 2020

Due to the recent changes in residential value, user needs for various spaces in residential space are increasing. However, it is not easy to change and reconstruct the first residential form according to the needs of the user due to the characteristics of the residential space where movement and deformation are difficult. Therefore, this study aims to derive a plan to meet user needs according to changing residential value by using fully autonomous vehicles with a concept of space that can be moved. First, the existing residential space was classified through literature research, and based on this, the space type of the fully autonomous vehicle for the residential was derived through user research. Then, through the survey method and statistical analysis, user needs analysis for residential space, usefulness analysis of derived space type and type specification were carried out. Finally, based on the results of the study, the design direction of the fully autonomous vehicle for residential purpose was presented. Based on the user's perception, it is meaningful that it categorizes the space of the fully autonomous vehicle for residential purposes and suggests the design direction.