• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.18-24
• /
• 2008

This paper presents the stress and deformation behaviors of 9% nickel steel inner tank in a full containment LNG storage tank using a FE analysis. For an increased strength safety of an inner tank, the tension cable was fastened around the outside wall of an inner tank, which is known as a weak zone for the hydrostatic pressures, cryogenic temperature loads, and other loadings. Based on the FEM computed results between a conventional inner tank and a inner tank with tension cables around the lower part of the side wall of an inner tank, the redesigned inner tank is more safe than that of the conventional tank without a tension cable. The FEM results recommend $3{\sim}4$ steel tension cables with a diameter of 50mm for an increased strength safety of the inner tank, which may decrease the stress concentration and deformation near the lower part of the side wall. Thus the tension cable around the inner tank may be used as an alternative safety device compared to the stiffener and the top girder structures for the increased LNG storage tank, especially.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.427-434
• /
• 2020

This study was conducted to investigate the effects of dietary supplementation with condensed molasses soluble (CMS), which has economically benefitted as an alternative ingredient of molasses, on growth performance and meat quality in growing-finishing pigs. A total of 160 cross-bred growing pigs (LY×D) having body weight 27.3±1.78 kg, were allotted to 1 of the 4 treatment groups with 4 replications each, in a completely random block design. The experimental diet consisted of a basal diet (CON), with supplementation of molasses 3% (MOL 3.0), CMS 1.5% (CMS 1.5), and CMS 3% (CMS 3.0) to basal diet. Feed and water were provided ad libitum for 70 days. We observed higher feed intake in the MOL 1.5, CMS 1.5, and CMS 3.0 groups than CON group. The final body weight and weight gain were significantly improved in the CMS 3.0 group (p<0.05), as compared to CON group. Evaluation of the meat quality revealed no significant difference in water holding capacity, heating loss, and pH, among all experiment groups. This study indicates that feeding CMS results in improved growth performance in growing-finishing pigs without deterioration in meat quality, and has the potential to be used as an alternative ingredient of molasses in swine feed.

• Food Science of Animal Resources
• /
• v.23 no.2
• /
• pp.128-136
• /
• 2003

This study was peformed to evaluate physico-chemical and textural properties, and shelf-life effect of low-fat functional sausages(LFFS) manufactured with sodium lactate(SL), lac color and various molecular weights of chitosans(low=1.5 kDa, medium=30∼40 kDa and high=200 kDa) during storage at 4$^{\circ}C$ for 8 weeks. LFFS had a pH range of 6.39∼6.50, 76∼78% moisture, <2% fat, 14∼15% protein. The combination of SL and low molecular weight(MW) of chitosan improved water holding capacity(WHC), however those of SL and medium MW of chitosan reduced WHC. Vacuum purge(VP) reduced with increased MW of chitosans during refrigerated storage. The addition of chitosans reduced the lightness and yellowness, but increased the redness values, which was comparable to the sodium nitrite concentration between 75 and 150 ppm. LFFS containing SL and medium MW of chitosan increased most texture profile analysis(TPA) values, as compared to controls with 75 and 150 ppm. The addition of SL in LFFS retarded the microbial growth for Listeria monocytogenes, however no synergistic effect with the addition of chitosans were observed. E coli O157:H7 and Salmonella typhimurium reduced during refrigerated storage, regardless of SL and chitosan treatments. Increased storage time increased values for VP, yellowness and textural properties. These results indicated that the combination of SL and various MW of chitosans affected the functional and textural properties, and inhibited the microbial growth for LM effectively. In addition, 0.5% lac color as a replacer for sodium nitrite improved the color development, resulting in similar hunter color values, which was comparable to the sodium nitrite concentration between 75 and 150 ppm.

• Tunnel and Underground Space
• /
• v.14 no.1
• /
• pp.69-77
• /
• 2004

Investigation of the time-dependent behavior of rock and the associated mechanisms are of key interest in long-term stability analysis of many engineering applications. In this study, creep tests were performed on Daejeon granite samples of 25.4mm diameter under uniaxial compression at varying stress levels. The effect of moisture was investigated by testing both air-dried and fully water-saturated samples. The creep behavior of Daejeon granite exhibited three distinctive stages of primary, secondary and tertiary creep. The ultimate strength of granite under a constant stress decreased considerably with time. Saturation and immersion of the test specimen in water markedly increased the total creep strain as well as the secondary creep rate. The experimental creep curves are fitted to Burger's model as well as two other empirical models suggested by previous researchers. A number of the parameters determined for each model are dependent on stress and influenced by the presence of water. Based on the experimental results, an empirical relation between the applied stress and the time-dependent strain is established separately for each air-dried and fully water-saturated Daejeon granite.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.4
• /
• pp.282-288
• /
• 2007

그 동안 많은 역학연구를 통해서 금속가공유(metalworking fluid, MWFs) 노출과 여러 조직에서 암 발생 위험과의 관계를 밝혔지만, 금속가공유 종류(비수용성, 수용성, 합성, 준합성)별로 구분된 위험은 아직 완전하게 규명되지 않았다. 역학조사에서 금속가공유 노출을 대체할 수 있는 인자(surrogate)로서 정성적(qualitative), 명목적(ordinal) 혹은 준정량적인(semi-quantitative) 변수들(금속가공유에 대한 노출 유무, 노출 정도: 높음, 낮음 등, 직업 유무, 근무기간 등)을 이용하여 금속가공유 노출을 평가하였다. 이러한 노출평가방법은 기본적으로 금속가공유 노출 강도(intensity)가 고려되지 않을 뿐만 아니라 노출 분류 오류(misclassification)도 항상 존재할 수 있어 금속가공유 노출은 물론이고 종류별 위험을 밝히기 어렵다. 일부 역학연구에서 금속가공유 종류별 누적 노출양(cumulative exposure level)과 암위험과의 관계를 밝혔다. 이러한 연구결과들은 모두 금속가공유 종류별로 과거노출을 추정할 수 있는 자료(정량적인 노출평가자료, 과거직업력, 취급했던 금속가공유 종류 등)가 잘 기록되어 있는 1개의 대규모 자동차공장에서 나온 것들이다. 따라서 금속가공유에 대한 노출자료가 부족하고 사용특성에 대한 기록이 없거나 부족한 일반 인구나 산업을 대상으로 한 역학연구에서는 금속가공유의 종류별 위험을 밝히는것은 불가능하다. 금속가공유 종류별로 과거 노출에 대한 확률(probability)을 추정하는데 일반적으로 활용할 수 있는 노출확률 메트릭스를 개발하는 것이 필요하다.

• Journal of Bio-Environment Control
• /
• v.1 no.1
• /
• pp.72-83
• /
• 1992

우리 나라 축사는 생산효율 제고를 위하여 대형화, 밀폐화, 고밀도화, 자동화 경향이 뚜렷하다. 대형의 밀폐된 고밀도 축사는 쾌적한 실내환경을 전제로 하기 때문에 기계적으로 실내환경을 적절히 제어하지 않으면 안된다. 제한된 공간에 먼지, 병원성 미생물, 유해기체, 수분이나 열의 과도한 집적은 생산과 재생산효율에 심각한 영향을 미친다. 그러므로 축사내 생산주체인 가축과 작업인이 쾌적한 실내환경에서 생산활동을 할 수 있도록 열적, 화학적/생물학적 환경을 물리적으로 제어하지 않으면 안된다. 본 연구는 실험축사내 가축이 일정한 열을 발생할 때 실내공기의 유동형태를 예측하기 위해서 수행하였다. 이 연구의 결과를 실내환경제어를 위한 환기시스템 책략 개발의 기초자료로 활용할 수 있다. 실험축사내의 공기유동을 예측하기 위해 Body-Fitted Coordinate(BFC)의 격자배열과 k-$\varepsilon$ 난류모형 및 SIMPLE계열 solution scheme을 사용하였으며, 예측의 유효성 검정은 Boon(1978)의 실험결과를 이용하였다. 예측한 공기유동의 형태와 실험한 공기유동의 형태를 비교한 결과 대체로 만족할만한 결과를 얻었다. 그러나 유입공기의 온도가 1$0^{\circ}C$인 경우의 공기유동은 실험유동형태와 약간의 차이가 있었다. 즉, 실험에서는 수평슬롯으로 유입 된 공기가 바로 아래로 굴절되어 유동하였으나, 예측의 결과는 일정 거리로 수평방향으로 유동하다가 아래로 굴절하였다. 이런 유동의 차이는 k-$\varepsilon$ 난류모형 자체가 경험적으로 부력에 민감하게 반응않는 결함이 원인이 될 수도 있으며, 실험의 부적절한 수행이 원인이 될 수도 있다. 이 유동의 경우 Reynolds 수가 3,000정도의 난류이며, 완전발달유동 (fully-developed flow)이므로 관성력 (inertia force)이 부력 (buoyancy force)보다 커, 일정거리 수평으로 유동하다가 아래로 굴절할 수도 있기 때문이다. 앞으로 이를 규명하기 위한 보다 깊이 있는 연구가 이루어져야 할 것이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.135-135
• /
• 2015

2004년 개발된 다차원홍수피해산정법(MD-FDA)은 홍수에 따른 경제적 피해를 추정하기 위한 기법으로서 그 동안 하천설계기준, 댐설계기준, KDI 예비타당성조사 지침 등에 반영되어 실무에서 활발히 사용 중이다. 그러나 그 동안 많은 연구에서 MD-FDA의 인벤토리 체계, 가용자료의 정밀성, 손상함수, 손실유형 범위와 관련한 개선이 요구되었으며, 최근에는 재난위기 관리 능력강화를 위한 "한국형 재난피해 예측 시스템" 개발의 필요성이 제기되면서 현재 다양한 분야의 전문가들이 재난손실과 관련한 많은 연구를 진행 중이다. 이에 본 연구는 국외 주요 홍수손실 예측 모델과 현재 국가차원에서 서비스되는 상세자료를 검토하여 일반건물(general building)의 홍수손실 평가 체계를 제시하고, 이와 연관된 세부요소 기술을 정립하였다. 우선, 지역 내 건물현황 및 특성정보가 참조가능한 자료를 바탕으로 일반건물의 유형을 분류하였고, 이밖에 건물손실 평가에서 주요 참고자료로 활용되는 인구, 종사자수 등의 사회 경제적 정보를 연계한 인벤토리 DB 구조를 설계하였다. 이로부터 구축되는 인벤토리 DB는 위치정보를 포함하는 공간자료이며, 손상(damage)과 손실(loss)을 평가하기 위한 건물특성 정보를 포함한다. 한편, 본 연구에서의 건물손실은 자산의 총가치를 기준으로 한 상대적 손상률(%)을 설명하는 손상함수를 기반으로 하기 때문에 감가상각을 고려한 건물의 완전대체비용(건물자산가치)가 정의되어야 한다. 이를 위해 본 연구는 최근 한국감정원에서 발간한 "건물신축단가표"와 "유형고정자산 내용연수표"를 바탕으로 손실평가에 필요한 요소기술을 정립하였다. 제시한 일련의 과정은 동두천시 신천 범람사례를 대상으로 적용하였고, 그 결과를 기존의 MD-FDA 결과와 비교하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.281-313
• /
• 1976

To obtain fundamental informations on cotton breeding efficiences for Korea, individual genetic relationships and interrelationships between the agronomic characteristics of Upland cotton were investigated. These experiments were couducted at the Mokpo Branch Station $(34^{\circ}48'N, $ $126^{\circ}23'E$ and altitude of 10m above sea level) from 1969 through 1972. Heterosis, combining ability, dominance and recessive gene action, genetic variance, and phenotypic and genotypic correlation were investigated by $F_1'S$ from an 11-parent partial diallel cross and the segregating $F_2$ and $F_3$ populations of the cross Paymaster times Heujueusseo Trice. The following points resulted from this study, 1. Heteroses for number of bolls per plant and lint yield were significant at 27, 84% and 37.26%, respectively. No other character had significant heteroses. 2. The GCA estimates for all studied characteristics were higher than the SCA estimates. Varieties with high GCA effects were Suwon 1 for earliness, Paymaster and Arijona for high lint percent, and Arijona for long fiber, etc, 3. SCA estimates for lint yield varied widely in crosses with Mokpo 4, Mokpo 6 and Heujueusseo Trice. Those crosses with the highest SCA effects were combinations with large characteristics differences, Example of these crosses are Mokpo 4 times Acala 1517W, Mokpo 4 times D. P. L. and Heujueusseo Trice aud Paymaster. 4. Early-maturing varieties were completely dominant to late-maturing varieties in some combinations while other crosses gave intermediate phenotypes. These results suggest additive genetic action by multi-genes. Heujueusseo Trice, Mokpo 6, and Suwon 1 showed highest degree of dominance for earliness. 5. There were no significant trends for inheritance of weight of boll and 100 seeds weight. 6. Long staple was partially to completely dominant to short staple. Though there were single gene ratios the rate of dominance decreased in the $F_2$ and $F_3$ populations in the cross between the long staple variety Paymaster and the short staple variety Heujueusseo Trice. Diallel cross $F_1$ hybrids showed complicated allelic gene action for staple length. Various dominance degree were shown by varieties. 7. Number of bolls per plant indicated strong over-dominance and small non-allelic additive gene action. 8. Lint Yield was characterized by over-dominance and by multiple non-allelic-gene action. High-yielding varieties were dominant to low-yielding ones. However, the low-yielding variety Heujueusseo Trice showed over-dominance, indicating different reactions according to the varieties and combinations. 9. Broad sense heritability for days to flowering was 34-39% while narrow sense heritability was 11%. Large variations of individual plants caused by Korean climatic conditions cause this situation. Heritability estimates for weight of boll was 30% for broad sense and 22% for narrow sense. 10. Heritability estimates for staple length and lint percent were very high suggesting strong selection effects. 11. Narrow sense heritability estimates for number of bolls per plant was 30% in the diallel cross $F_1$ hybrids and 36% in the $F_2$ population of the special cross. Broad sense heritability was estimated at 67% suggesting that. 12. Heritability estimates for lint yield was low due to high over-dominance in the diallel cross $F_1$ hybrids. Heritability estimates for yield was low in the $F_1$ hybrids but high in the $F_2$ and $F_3$ populations. 13. Phenotypic and genotypic correlations between lint percent and days to flowering and between staple length and days to flowering were high in the $F_1, $ $F_2$ and $F_3$ populations. Late-maturing varieties and individuals had long staple and high lint percent in general. As the correlation between days to flowering and lint yield was extremely low, the two traits were considered independent of each other. Days to flowering and number of bolls per plant were negatively correlated in the $F_3$ population, indicating early-maturing individual plants with many bolls may be readily selected. 14. Phenotypic and genotypic correlations between lint percent and staple length were high in $F_1, $ $F_2$ and $F_3$ populations. Accordingly, long staple varieties were high in lint percent. It was recognized that lint yield and lint percent were positively correlated in the diallel cross $F_1$ hybrids, and lint percent and staple length were positively correlated in the $F_2$ population, indicating that lint percent and staple length affect lint yield. 15. Lint yield was significantly and positively phenotypically correlated with number of bolls per plant in $F_1, $ $F_2$ and $F_3$ populations. A high genotypic correlation was also noted indicating a close genetic relationship. The selection efficiencies for a high-yielding variety can be increased when individual plants with many bolls are selected in later generations. The selection efficiencies for good fiber quality can be enhanced when individuals with long staple and high lint percent are selected in early generations.

• Journal of Animal Science and Technology
• /
• v.47 no.4
• /
• pp.655-666
• /
• 2005

This study was performed to measure physicochemical and textural characteristics, and shelf-life effect of low-fat functional sausages(LFFSs) manufactured with sodium lactate(SL, 3.3%), lac pigment and various molecular weights(MWs) of chitosan (Low=1.5 kDa, Med=30-50 kDa and High=200 kDa) during storage at 15$^{\circ}C$ for 18 days. LFFSs had 73.7-76.0% moisture, lower than 3% fat and 14-15% protein, respectively. pH values were 6.05-6.44 and the control(150 ppm, $NaNO_2$) was the lowest among LFFSs (p<0.05). Increasing storage time decreased pH values, but no differences in pH values were observed up to 6 days of storage (p>0.05). LFFSs containing SL and low MW of chitosan improved water holding capacity (WHC) and different from those with SL and medium-MW chitosan. WHC was decreased with increased storage time and differences of WHC were observed from 18 days of storage. The addition of chitosan reduced both lightness and redness values, as compared to 150 ppm sodium nitrite(SN), and increased storage time decreased yellowness(p<0.05), especially at 12 days of storage. LFFSs with SL and medium-MW chitosan increased most textural properties compared to the control(p<0.05). The addition of SN of 150 ppm in LFFSs retarded microbial growth for E. coli 0157:H7, while those with SL tended to have an antimicrobial effect for Listeria monocytogenes(LM). The growth rate of LM was delayed by addition of various MW of chitosans in LFFSs, especially high MW chitosan, as compared to LFFSs containing SL alone. These results indicated that the functional, textural and antimicrobial effects of LFFSs were improved by addition SL and various MW of chitosan combinations. In addition, 0.05% lac pigment improved the cure color of LFFSs similar to those of 150 ppm SN.

• Journal of Technology Innovation
• /
• v.25 no.3
• /
• pp.233-263
• /
• 2017

The purpose of this study is to examine the appropriateness of Regulatory Impact Analysis(RIA) in terms of the technological regulation impact assessment in order to confirm whether the current RIA process reflects the important characteristics of technological regulation. This paper develops a logical framework for analysis of technological regulation and evaluates the appropriateness of the RIA statements submitted by the government departments. From the viewpoint of [technological feasibility of regulation], [synthesis of domestic technological norms], [synthesis of international technological norms], as a result of evaluating the contents of the actual RIA statement on the basis of objective facts, feasibility of alternative analysis, and expert judgment, only 23.4% of the RIA statements were judged "appropriate", and there were no particular differences among the government. As a result of reviewing the appropriateness of RIA statements according to regulatory attributes, the appropriateness of RIA statements on technological regulation with social regulatory and indirect regulatory attributes was rather high. In sum, the level of Korean RIA statements is insufficient to carry out the practical meaning of technological regulation impact assessment. That is, as each government department adopts technological regulation, the understanding of the technological properties of the regulation may not be complete. The RIA statement that does not adequately reflect the technological rationale, hinders the careful review of other regulatory alternatives by exaggerating the feasibility of the technology regulation, at the same time leads to the serious problems that impede the acquisition of competitiveness of companies and the public in the global competition system.