• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.256-259
• /
• 1996

수명시험에서는 시험기간을 단축하기 위해 중도절단(consoring) 방법을 사용한다. 혼합 관측중단방법은 정시에 시험을 끝낼 수 있으며 고장시간을 관찰할 필요가 없다는 장점 때문에 널리 사용되고 있다. 본 논문에서는 제품의 수명이 와이블 분포를 따르고 형상모수를 알고 있다는 가정아래, 혼합 관측중단하에서 생산자 위험과 소비자 위험을 고려한 신뢰도 합격판정 샘플링 계획을 개발하였다. 아울러, 형상모수값에 개재된 불확실성이 실제 생산자 위험과 소비자 위험, 그리고 의사결정까지의 평균 고장개수에 미치는 영향을 민감도 분석을 통해 파악하였다.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.4
• /
• pp.893-901
• /
• 2014

A certain number of products are sold each month and some of them are returned for repair. In this study both return rate and cumulative return rate are shown on the graph to show the general trend of how many products are returned as time goes by. Next this type of summary data can be considered as a conglomeration of both left and right censored data. So reliability analysis is attempted for this type of summary data. Lastly, left censored data can be traced to find the exact time period during which the product has been claimed. In that case the left censored data can be taken as failure data. So similar type of reliability analysis is attempted for the resulting right censored data.

• ETRI Journal
• /
• v.14 no.1
• /
• pp.76-86
• /
• 1992

시스팀의 구조가 복잡하면 할수록 신뢰도는 중요한 문제로 부각된다. 신뢰도는 시스팀의 신뢰도 예측, 시스팀 설계시 신뢰도 배분, 장기간에 걸친 운영시 시스팀 유지와 보수 또 이에 따른 인원계획에도 영향을 미치고 있으며, 시스팀의 효율성 및 경제성 파악에 중요한 척도로 이용되고 있다. 본고에서는 신뢰도 모델로서 와이블 (Weibull) 분포의 이용과 적합도 판정문제를 고찰한다. 특히 새로운 통계방법을 이용하여 계산이 간편한 적합도 판정법을 소개한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.3
• /
• pp.365-372
• /
• 2013

In this study, a statistical method for evaluating the fatigue life of a vehicle muffler was used to obtain reliable fatigue data using a limited number of specimens. Cyclic bending tests were conducted using specimens manufactured to be exactly the same as the mufflers installed in cars that are currently in use. To estimate the fatigue life by comparing the data obtained during the fatigue tests, the most suitable probability density function for the normal, lognormal, and Weibull distributions was selected. A goodness-of-fit test was performed on the probability distributions, and then a Weibull distribution using the least square method was selected. By using the selected Weibull distribution, the probability-moment-life curves (P-M-N curve) reflecting the fatigue characteristics were suggested as the data for the reliable design of a muffler.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1169-1174
• /
• 2013

Most products are indeed governed by multiple failure modes. However, there are few cases in which reliability analysis applies to only one failure mode at a time. Furthermore, reliability data do not include information about failure modes, or the reliability analysis is performed using a representative failure mode. The Weibull shape parameter for failure modes is more important than one for products in the reliability qualification test. This paper presents reliability analysis methods for a mechanical component with multiple failure modes. These methods include the competing failure modes (CFM) method and the mixed Weibull method. Pneumatic cylinder test data with three failure modes are presented to estimate the shape parameter for each separate failure mode. In addition, reliability measures (B10 life, characteristic life) of the pneumatic cylinder considering three failure modes were compared with those assuming a single failure mode.

• Journal of Applied Reliability
• /
• v.3 no.2
• /
• pp.137-143
• /
• 2003

Sequential test plans are characterized by decision rules for accepting or rejecting compliance, or continuing the test at my test time. They are determined by selected values of risks and discrimination ratio. The sequential test plans in the international standard such as MIL-HDBK-781A are based on the assumption that the underlying distribution of times between failures is exponential. In this paper, sequential test plans are extended to the Weibull distribution case. Simulation studies are performed to examine the reasonability in this extension.

• Journal of Applied Reliability
• /
• v.1 no.1
• /
• pp.17-33
• /
• 2001

The characteristics of Weibull distribution are investigated as a function of shape parameter. The statistical estimation methods of the shape parameter and statistical comparison methods of two or more shape parameters are studied. Assuming Weibull distribution, statistical analysis of bending-strength data of alumina titanium carbide ceramic matrix composites machined two different methods are performed.

• Journal of Applied Reliability
• /
• v.13 no.3
• /
• pp.191-206
• /
• 2013

Application areas for Lifetime Performance Index(LPI), a kind of process capability index to be frequently used as a means of measuring process performance are illustrated with examples. Statistical properties for maximum likelihood and unbiased estimators of LPI are evaluated and discussed under Weibull distribution with known shape parameter. Furthermore, guidelines for selecting an estimator of LPI are also presented.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.04a
• /
• pp.517-531
• /
• 2013

보증 데이터를 통해 제품의 수명 및 형상모수를 추정할 때 최우추정법과 같은 전통적인 통계 분석방법(Classical Statistical Method)을 많이 사용하였다. 그러나 전통적인 통계 분석방법을 통해 수명과 형상모수의 추정 시 표본의 크기가 작거나 불완전한 경우 추정량의 신뢰성이 떨어진다는 단점이 있고 또 누적된 경험과 과거자료를 충분히 이용하지 못하는 단점도 있다. 이러한 문제점을 해결하기 위해 모수의 사전분포를 가정하는 베이지안(Bayesian) 기법의 적용이 필요하다. 하지만 보증 데이터분석에 있어서 베이지안 기법을 이용한 연구는 아직 미흡한 실정이다. 본 연구에서는 수명분포가 와이블 분포를 갖는 보증데이터를 활용하여 모수 추정의 효율성을 비교 분석하고자 한다. 이를 위해 와이블 분포의 모수가 대수정규분포를 따르는 사전분포를 갖는 베이지안 기법과 전통적 통계기법인 생명표법(Actuarial method)을 활용하여 추정량을 도출하고 비교 분석하였다. 이를 통해 충분한 관측 데이터를 확보할 수 없는 경우에 베이지안 기법을 이용한 보증 데이터 분석방법의 성능을 확인하고자 한다.

• Journal of the Korean Data and Information Science Society
• /
• v.20 no.1
• /
• pp.39-48
• /
• 2009

Fisher information matrix plays an important role in statistical inference of unknown parameters. Especially, it is used in objective Bayesian inference which derives to the posterior distribution using a noninformative prior distribution and is an example of metric functions in geometry. The more parameters for estimating in a distribution are, the more complicate derivation of the Fisher information matrix for the distribution is. In this paper, we derive to the Fisher information matrix for 3-parameters Weibull distribution which is used in reliability theory using Mathematica programs.