• Journal of Bio-Environment Control
• /
• v.31 no.1
• /
• pp.43-51
• /
• 2022

This study was conducted to investigate the effect of ventilation at high temperature on the control of powdery mildew, silverleaf whitefly two-spotted spider mite occurred at Korean melon cultivation greenhouse, and on leaf rolling and flowering of the plant in summer season. 'Alchanggul' grafted onto 'Hidden Power' rootstock was planted on soil bed with the distance of 40 cm. Three ventilation temperatures of 45℃, 40℃, and 35℃ as set points were compared. Ventilation treatment was done by control of side window operation from 18th June to 13th July when silverleaf whitefly, mite, and powdery mildew were occurred in all greenhouses. The temperature inside greenhouse was increased up to the set temperature point on sunny days and maintained for about 9 hours with high relative humidity at 45℃ condition. The differences of day maximum air temperature and day minimum RH were the highest at 45℃ treatment. After 11 days of treatments, the damage by powdery mildew and two-spotted spider mite was almost recovered at 45℃ treatment but not at 40 and 35℃. The population of silverleaf whitefly and two-spotted spider mite were significantly decreased at 45℃ treatment at 14 days after treatment, while powdery mildew symptom was not significantly decreased. Leaf rolling was observed at high temperature but not severe at 45℃ treatment. After 26 days of treatments, female flowers did not bloom at all at 45℃ treatment, and the number of male flowers was 1.2 among 15 nodes of newly grown shoots. As the result, it indicates that ventilation at the high temperature of 45℃ for about 2 to 3 weeks can be an applicable method to control above mentioned pests and disease, and to recover the vegetative growth of Korean melon by reducing flowering of the plant.

• Journal of Bio-Environment Control
• /
• v.32 no.4
• /
• pp.384-395
• /
• 2023

Since transpiration plays a key role in optimal irrigation management, knowledge of the irrigation demand of crops like tomatoes, which are highly susceptible to water stress, is necessary. One way to determine irrigation demand is to measure transpiration, which is affected by environmental factor or growth stage. This study aimed to estimate the transpiration amount of tomatoes and find a suitable model using mathematical and deep learning models using minute-by-minute data. Pearson correlation revealed that observed environmental variables significantly correlate with crop transpiration. Inside air temperature and outside radiation positively correlated with transpiration, while humidity showed a negative correlation. Multiple Linear Regression (MLR), Polynomial Regression model, Artificial Neural Network (ANN), Long short-term Memory (LSTM), and Gated Recurrent Unit (GRU) models were built and compared their accuracies. All models showed potential in estimating transpiration with R² values ranging from 0.770 to 0.948 and RMSE of 0.495 mm/min to 1.038 mm/min in the test dataset. Deep learning models outperformed the mathematical models; the GRU demonstrated the best performance in the test data with 0.948 R² and 0.495 mm/min RMSE. The LSTM and ANN closely followed with R² values of 0.946 and 0.944, respectively, and RMSE of 0.504 m/min and 0.511, respectively. The GRU model exhibited superior performance in short-term forecasts while LSTM for long-term but requires verification using a large dataset. Compared to the FAO56 Penman-Monteith (PM) equation, PM has a lower RMSE of 0.598 mm/min than MLR and Polynomial models degrees 2 and 3 but performed least among all models in capturing variability in transpiration. Therefore, this study recommended GRU and LSTM models for short-term estimation of tomato transpiration in greenhouses.

• Journal of Korea Water Resources Association
• /
• v.46 no.7
• /
• pp.745-754
• /
• 2013

The systematic analysis and evaluation of required energy in the processes of drinking water production and supply have attracted considerable interest considering the need to overcome electricity shortage and control greenhouse gas emissions. On the basis of a review of existing research results, a practical method is developed in this study for evaluating energy in water supply networks. The proposed method can be applied to real water supply systems. A model based on the proposed method is developed by combining the hydraulic analysis results that are obtained using the EPANET2 software with a mathematical energy model on the MATLAB platform. It is suggested that performance indicators can evaluate the inherent efficiency of water supply facilities as well as their operational efficiency depending on the pipeline layout, pipe condition, and leakage level. The developed model is validated by applying it to virtual and real water supply systems. It is expected that the management of electric power demand on the peak time of water supply and the planning of an energy-efficient water supply system can be effectively achieved by the optimal management of energy by the proposed method in this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.101-109
• /
• 2013

Recently, it is certain that the increase of heating and cooling energy consumption by radical change in climate condition has caused serious problems related to environmental and energy concerns associated with increase of fossil fuel usage and carbon dioxide production as well as global warming. So, various actions to reduce greenhouse gas exhaustion and energy consumption have been prepared by world developed countries. Our government has also been trying to seek energy control methods for houses and buildings by proclaiming political polices on low-carbon green growth and construction and performance standards for environment-friendly housing. The energy consumption by buildings approximately reaches 25% of total korea energy consumption, and the increasing rate of energy consumption by buildings is stiffer than the rate by the other industries. The greatest part in the buildings of the energy consumption is building facade. While lots of research projects for reducing energy consumption of the facade have been conducted, but a few research projects on concrete comprising more than 70% of outsider of buildings has been tried. This research presents here a study to improve the insulation property of structural concrete formed by micro form admixture (MFA) with experimentally reviewing the physical, mechanical and thermal characteristics of the concrete. As the results of this experiment, in the case of concrete mixed with MFA, slump loss has been improved. As the mixing ratio of MFA increases, the compressive strength is decreased and thermal conductivity is increased. Also it was found that water-cement ratio increases, the compressive strength is decreased and thermal conductivity is increased. but, there was not big influence by the change of fine aggregate ratio.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.88-95
• /
• 2017

The usage of toxic gas in Korea is increasing in the development of high-tech industries such as semiconductors, displays and solar panels. The recent survey of domestic toxic gas consumption indicates an increase in annual average of 12.4 percent, but it is still focused on usage, and it is negligent in safety and treating the post. In September 2012, an accident occurred in Gu-mi involving hydrofluoric acid leak demonstrates the absence of safety management. Due to the incident, the government, industry and academia have been interested in chemical substances(toxic gas), and the government-led safety management has been established and implemented, but there are still a lot of safety blind spots. The purpose of this study is to develop effective measurement methods for the destruction or removal efficiency of gaseous materials emitted from the Scrubber used in the semiconductor and display industries. Also, this study demonstrated how toxic gas facilities can be applied without error by verification test for the measurement method guideline of the destruction or removal efficiency of the green-house gas reduction facility in the semiconductor and display industries used by the National Institute of Environmental Research and the UNFCCC, and suggested the differentiated measurement methods for toxic gas reduction facilities, and the third party certification for safety facilities is needed to prevent toxic gas accidents.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.48-48
• /
• 2019

Amorphophallus paeoniifolius (Dennst.) Nicolson는 영명으로 Elephant yam 또는 Whitespot giant arum 으로 불리는 천남성과(Araceae) 식물로 동아시아, 뉴기니, 오세아니아, 마다가스카르 등지에서 자생하고 있으며 숲의 가장자리 또는 2차림에서 발견 된다. 다년생 식물로 덩이줄기는 어두운 갈색의 둥근모양으로 직경 20~25 cm로 자라고 수염뿌리가 사방으로 달린다. IUCN 적색목록(Red List)에 관심대상 종(LC: Least Concern)에 속하는 식물이다. 현지인들은 마(Dioscorea Polystachya Turcz.)처럼 채소로 먹기도 하며 약용으로 쓰이기도 하는데 복부장애, 소화불량, 천식, 기관지염, 빈혈 등에 약효가 있다. Amorphophallus paeoniifolius은 $25^{\circ}C{\sim}35^{\circ}C$, 연강수량 1,000~1,500 mm에서 잘 자란다. 가운데 눈이 올라오면서 생장을 시작하고 며칠이 지나서야 잎 또는 꽃으로 자라는지 알 수 있다. 잎의 생육주기는 잎눈이 생장을 시작하면 잎자루 끝에 소엽과 소잎자루가 접힌 채로 올라온다. 소엽들이 펴지면서 완전한 모습을 갖추는데 30일 이상의 생장기간을 갖는다. 잎의 형태는 우상복엽(pinnate compound leaf)으로 우산처럼 보이는 잎 하나로 광합성을 한다. 잎은 최대 높이 2.5~3 m, 너비 3 m까지 자라며, 잎자루의 색은 녹색과 청색으로 얼룩덜룩한 무늬가 있다. 인공환경 조건에서 Amorphophallus paeoniifolius 생활사 중 잎의 주기를 연구하기 위해서 광, 온도 등의 지상부 환경은 열대 및 아열대 식물의 자생지와 유사하게 조성하였고, 지하부 환경은 인공 배합토를 사용하여 조성하였다. 평균온도는 $25{\sim}28^{\circ}C$, 겨울철 최저 $16^{\circ}C$, 여름철 최고 $33^{\circ}C$를 유지 관리 하였다. 자동 환경제어시스템으로 온도 및 환기를 유지 관리하고 필요에 따라 수동제어 관리를 병행하여 조절하였다. Amorphophallus paeoniifolius는 잎을 먼저 생성하고 광합성으로 생산된 영양물질을 덩이뿌리에 저장을 하고 그 영양물질을 이용하여 꽃을 피우는 생육 특성을 지닌다. 실험에 사용된 공시 식물은 2018년 12월 미얀마에서 생체(덩이줄기) 형태로 도입되었다. 화분에 식재 후 약 5개월이 지난 시점에서 잎의 생장이 시작되었다. 2019년 7월 29일 기준으로 높이 80 cm, 너비 60 cm의 크기로 성장하였으며, 생육환경에 따라 3~5개월 뒤 잎이 지고 나면 다시 덩이줄기로 되돌아갈 것으로 판단된다. 하지만 지금까지 이 식물에 알려진 정보는 인공환경에서의 연구가 아닌 자연환경에서의 연구결과이기 때문에 인공적인 온실 환경에서 자란 Amorphophallus paeoniifolius는 잎의 주기는 더 오래 갈 수도 있으며 꽃의 주기 또한 느리거나 빠를 수 있다. 잎의 생장주기(Leaf Cycle)시 잎자루가 낮과 밤의 방향을 달리 하여 자라는 것이 관찰되었다. 이는 광합성을 위해서 잎자루의 방향을 햇빛 방향으로 돌리는 것으로 판단된다. Amorphophallus paeoniifolius를 실내 조경 식물 또는 식 약용의 소재식물로 활용하기 위해서는 꽃의 생장주기 등 추가적인 모니터링과 연구가 필요하다.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.08a
• /
• pp.54-54
• /
• 2020

배추는 근본적으로 저온성 작물로 고온에 견디는 힘이 약할 뿐 아니라 가뭄이나 다습에도 취약하다. 그런데 2007년 이 후 매년 봄·초여름 가뭄이 지속되고 있으며, 예전처럼 강우에 의한 피해보다는 빈번히 나타나는 고온, 가뭄, 폭염 등 이상기상 환경조건에서 병 발생 및 생장지연으로 고랭지배추의 안정 생산이 위협받고 있다. 가뭄이 매년 지속됨에 따라 고랭지배추 재배지에서도 관수의 필요성이 인식되면서 관수를 실시하고 있으며, 대부분 스프링클러로 관수하고, 분수호스나 점적호스도 일부 이용하고 있으나 아직 토양수분, 토성이나 작물상태, 재배시기 등 환경요인을 고려한 과학적인 수분관리가 이루어지지 못하고 있어 고품질 안정생산을 위해서는 수분관리의 과학화가 필요한 실정이다. 관비재배는 적정한 비료를 필요한 위치에 공급하는 방식으로 비료의 효율을 높이면서 환경오염을 최소화하고, 비료과다 시용에 따른 환경오염 등을 회피할 수 있는 좋은 수단이다. 본 연구는 앞으로 고랭지배추 점적관수재배시 가뭄 극복과 효율적인 시비를 위한 적정 관비농도를 구명하고자 하였다. 배추품종은 수호를 이용하였으며 관비 EC농도(dS/m)는 0.4, 0.6, 0.8, 1.0, 1.2, 1.4 등 6처리를 두었으며 기준시비량은 N-P-K=32.0-7.8-19.8kg/10a로 하였다. 시험은 고령지농업연구소내 유리온실에서 4월 상순부터 5월 하순까지 직경 20cm 사각화분에 정식하여 재배하였다. 관비는 정식후 15일부터 7일 간격으로 5회 주었으며 관비량은 1회 화분당 65ml를 주었다. 화분은 완전임의배치 3반복으로 배치하였다. 초장은 정식후 38일까지 컸으며 엽장은 정식후 52일까지도 크는 경향을 보였다. 엽폭은 정식후 45일에 가장 많이 컸다. 초장, 엽장, 엽폭 모두 관비농도가 높을수록 커지는 경향이었으며 EC농도(dS/m) 1.4에서 가장 높게 나타났다. 주당 엽수와 주중도 EC농도가 높아질수록 많아졌으며 EC농도 1.4 처리에서 가장 많았고 그 다음이 EC 1.2 처리였다. 그러므로 관비 농도는 EC 1.4 dS/m 로 주는 것이 배추 생육에 좋을 것으로 생각된다.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.4
• /
• pp.307-319
• /
• 2009

Carbon dioxide capture and storage (CCS) technology has been regarded as one of the most possible and practical option to reduce the emission of carbon dioxide ($CO_2$) and consequently to mitigate the climate change. Korean government also have started a 10-year R&D project on $CO_2$ storage in sea-bed geological structure including gas field and deep saline aquifer since 2005. Various relevant researches are carried out to cover the initial survey of suitable geological structure storage site, monitoring of the stored $CO_2$ behavior, basic design of $CO_2$ transport and storage process and the risk assessment and management related to $CO_2$ leakage from engineered and geological processes. Leakage of $CO_2$ to the marine environment can change the chemistry of seawater including the pH and carbonate composition and also influence adversely on the diverse living organisms in ecosystems. Recently, IMO (International Maritime Organization) have developed the risk assessment and management framework for the $CO_2$ sequestration in sub-seabed geological structures (CS-SSGS) and considered the sequestration as a waste management option to mitigate greenhouse gas emissions. This framework for CS-SSGS aims to provide generic guidance to the Contracting Parties to the London Convention and Protocol, in order to characterize the risks to the marine environment from CS-SSGS on a site-specific basis and also to collect the necessary information to develop a management strategy to address uncertainties and any residual risks. The environmental risk assessment (ERA) plan for $CO_2$ storage work should include site selection and characterization, exposure assessment with probable leak scenario, risk assessment from direct and in-direct impact to the living organisms and risk management strategy. Domestic trial of the $CO_2$ capture and sequestration in to the marine geologic formation also should be accomplished through risk management with specified ERA approaches based on the IMO framework. The risk assessment procedure for $CO_2$ marine storage should contain the following components; 1) prediction of leakage probabilities with the reliable leakage scenarios from both engineered and geological part, 2) understanding on physio-chemical fate of $CO_2$ in marine environment especially for the candidate sites, 3) exposure assessment methods for various receptors in marine environments, 4) database production on the toxic effect of $CO_2$ to the ecologically and economically important species, and finally 5) development of surveillance procedures on the environmental changes with adequate monitoring techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.539-546
• /
• 2014

The purpose of this paper is to suggest policy implications for the development of climate change plan in city scale. For a comparative case study, Changwon city in Korea and Portland city in U.S.A. were chosen. Climate change plans of both cities were analysed and compared in the perspectives of framework, climate strategies, and implementation. The findings from the comparative case study are suggested for policy implications as the followings. Firstly, the framework should be more simple and clearly integrated from goal to action plans. Secondly, more caution must be exercised for the major GHG triggers and adaptation policy measures. Finally, establishment of clear timeline is the first step of leadership in climate change plan. Coordination agencies and sustainable assessment systems for monitoring each policies are essential for the successful implementation of climate change plan.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.138.2-138.2
• /
• 2010

온실가스 저감과 안정적인 에너지 확보를 위해, 정부는 신재생에너지 지원사업 정책을 보급보조사업(그린홈 100만호 사업, 일반보급보조사업, 지방보급사업)과 기반보조사업(발전차액지원제도, RPS(Renewable Portfolio Standard)시범사업)으로 나누어 수행하고 있다. 특히 최근 개정된 "신에너지 및 재생에너지 개발 이용 보급 촉진법"에서는 RPS도입을 염두에 두고, 1차에너지 공급 중 신재생에너지 공급의무 비율은 2015년까지 13%, 특히 태양에너지는 2015년 1,209GWh라는 목표를 제시하고 있다. 신재생에너지보급이 지역적 특성을 갖고, 신재생에너지원별 비용측면의 경쟁력에 차이가 남에 따라, 향후 RPS 도입시 예상되는 지역별 경쟁력 평가는 중요한 의미를 가질 것으로 판단된다. 본 연구는 이러한 목적에 따라 우선 그린홈 100만호 사업, 일반 및 지방보급사업의 경우, 설비용량 당 투자비의 분포를 살펴보았다. 그린홈 100만호 사업의 설비용량 당 투자비는 평균($\bar{X}$) 6,449,032원/KW, 표본오차(s) 358,743으로 나타났다. 낮은 설비용량 당 투자비를 가지는 사업설비는 경남(4,256,667원/KW), 광주(4,331,333원/KW) 등에 분포하였다. 그린홈 100만호 사업 이외의 survey 데이터는 다소 불비한 측면이 있으나 일반 및 지방보급사업의 경우, 지역별 설비용량 당 투자비 분포에 대한 평균($\bar{X}$)은 9,145,692원/KW, 9,336,695원/KW, 표본오차(S) 2,154,263, 470,945로 나타났다. 발전차액지원제도의 경우, 지역별 설비보급에 대한 분포는 전남 389개 사업설비의 소용량 사업이 집중적인 지원을 받고 있음을 확인하였다. 본 연구는 에너지관리공단의 2009년 전수조사 내부자료인 국내 태양광사업의 현황을 분석함으로써, 태양광 사업에 가중치를 적용하는 RPS 도입 시, 보급경쟁력을 비교 분석하여 지역별, 설비별 사업투자를 위한 기초적인 가이드라인을 제공할 수 있을 것으로 판단된다. 연구과정에서 확인된 데이터 오류 및 자료 부재의 문제점 등은 향후 합당한 지역별, 설비별 비교분석을 위해 보완되어야 할 부분으로 지적한다.