• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.19-28
• /
• 2021

Corrosion is the degradation of metals by reaction with the environment. It is difficult to completely remove. Corrosion proceeds rapidly after the protective barrier is destroyed, and several reactions occur that alter the composition and properties of the metal surface and local environments, such as diffusion of metal cations into the matrix, the formation of oxides, and local pH changes. The study of corrosion of steel and iron is of theoretical and practical interest and is receiving considerable attention. Acid solutions, which are widely used in industrial pickling, acid descaling, cleaning and acidification of oil wells, require the use of corrosion inhibitors to suppress corrosion attacks on metallic materials. Physical removal of rust requires expensive special equipment, and chemical removal of it can cause corrosion or shorten the life of the metal. In this study, an eco-friendly rust cleaner was developed using cosmetics and food materials by applying the concept of perm reducing agent and chelate, and applied to remove rust from industrial and hot water pipes and various industrial devices. As a result, it was found that rust cleaners remove rust more effectively and safely compared to conventional treatment methods. At the same time, the rust removal efficiency was 1.75 to 2.5 times better for industrial piping and 1.56 to 2.2 times better for boiler hot water than conventional methods.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.1
• /
• pp.70-74
• /
• 2000

Agar for microbiological medium was prepared with pilot-scale for industrial application by the process of microfiltration ($0.4 {\mu}m\;pore size$) in $40{\~}50{\circ}C$, washing with sot water, and treatment with $0.25\;N NaOH\;at\;70{\circ}C$. Transparency, gel strength, viscosity, sulfate content, and syneresis ratio of agar prepared from Gelidium amansii was compared with commercial agar for microbiological medium. Gel strength and transparency were increased with processing, however, it's viscosity, sulfate content, and syneresis ratio were reduced. The final agar product was superior to commercial agar for microbiological medium.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.597-607
• /
• 2002

Electric arc furnace and converter slag are produced by about 6 millions tons in Korea at 2000 year. But compared with blast furnace slag, those are utilized only in unvalued material like landfill and road construction. There are unstable materials, like free CaO, in electric arc furnace and converter slag at steel-manufacturing process. This might cause volume expansion in concrete, if electric arc furnace and converter slag aggregates were used in concrete. This expansion may reach to crack or collapse of concrete. It is therefore settled by standard specification for concrete that electric arc furnace and converter slag aggregates have not to use in concrete. First of all, volume stability and stabilized process should be solved in electric arc furnace and converter slag aggregate to use in concrete. In this study, 6 types of aging are evaluated for effects of stabilization to reduce the expansion of electric arc furnace and converter slag. h converter slag aggregate, these types of aging are not good for volume stability for concrete aggregate, and even if converter slag aggregate is treated with aging, concrete with it has some problems that strength is reduced with curing days. But in electric arc furnace slag aggregate treated with hotwater and steam aging, the expansion of electric arc furnace slag aggregate is reduced about two times than that of converter slag aggregate, and electric arc furnace slag aggregate concrete has good results in strength compared with control concrete using crushed stone.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.3
• /
• pp.77-84
• /
• 2012

It is known that some components of wood obstruct the hydration of cement when wood is mixed with cement. In order to examine the effect of pretreatment of wood chips in hot water, this study conducted the experiments for the setting and compressive strength of mortar by sieving pine wood chips with a 2.4mm sieve, dipping them in waters of different temperatures, and then using them as a part of the fine aggregate. For the experiments, water-cement ratio of the mortar was 0.50 and the amount of the fine aggregate substituted by wood chips was set at 0%, 2%, 4%, 6%, 8%, and 10% of the mass of the fine aggregate. As a result of the test, it was found out that when wood chips were used to substitute fine aggregate for the production of mortar, more usage of wood chips postponed setting more, and the treatment of wood chips with water improved the problem of the delay in setting time. Especially, the final setting time of the mortar which used 2~6% of wood chips treated in $100^{\circ}C$ water for 30 minutes was almost the same as the final setting time of the mortar which used no wood chips. Also, the compressive strength of the mortar which used the wood chips treated with water was compared to that of the mortar which used the wood chips not treated with water. The result showed that the strength improved for age of 7 days and 28 days, while there was little change in strength for age of 3 days.

• The Korean Journal of Pesticide Science
• /
• v.17 no.4
• /
• pp.411-418
• /
• 2013

The black pine bast scale, Matsucoccus thunbergianae is one of the most serious insect pest in Japanese black pine, Pinus thunbergii forest in Korea. Insecticidal activity of 10 folds hot water extracts from 7 herbal plants (Atractylodes lancea, Eugenia caryophyllata, Lonicera japonica, Melia azedarach, Quisqualis indica, Sophora flavescens and Taraxacum mongolicum) were tested against different stage of M. thunbergianae using spray method both in laboratory and field. Efficacies of herbal extracts were different depending on stage of M. thunbergianae. Q. indica sprayed with hand sprayer produced the highest corrected mortality of 95.7% on intermidiated nymph stage, however, A. lancea produced the highest corrected mortality (51.3%) on pupae of M. thunbergianae in laboratory. Q. indica and A. lancea were highly effective against female M. thunbergianae in laboratory, however, corrected mortality was lower than other stage (40.0%). Efficacy of Q. indica was similar to effective insecticide, fenitrothion 50% EC against M. thunbergianae in field trials. These results indicated that Q. indica could be an environmental friendly control agent of M. thunbergianae.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1998.05a
• /
• pp.39-44
• /
• 1998

현재 국내에 보급되어 있는 현대화 온실 203개를 대상으로 냉난방과 관련된 설비현황을 조사하여 분석한 결과를 요약하면 다음과 같다. \circled1 온실의 건설방위는 남북동(58.1%)과 동서동(26.8%)이 대부분이었고, 철골온실은 Wide-span형이 81.8%, 플라스틱온실은 1-2W형 온실이 97.5%였다. 휴작하는 온실은 약 41%정도였고, 재배작물은 채소류가 약 80%, 화훼류가 약 20%정도였으며, 재배방식은 철골온실의 경우 양액재배가 57.2%, 플라스틱온실에서는 토양재배가 88.5%였다. \circled2 온실의 외부 피복재는 철골온실은 유리가 92.2%, 플라스틱온실에서는 PE가 43.3%, EVA가 51.9%로 대부분이었다. 철골온실은 1중피복이 98.7%로 거의 전부이었고, 플라스틱온실에서는 2중피복이 78.7%로 나타나, 철골온실에서 보온커튼을 통한 보온성 향상과 밀폐성이 더욱 중요함을 알 수 있다. \circled3 보온용 피복재는 부직포가 64.9%로 가장 많았고 대부분 2층커튼(85.9%)이었으며, 개폐방식은 대부분 예인식(92.7%)의 자동개폐방식(75.2%)이었다. 한편 바닥을 피복한 온실은 약 30% 정도로 나타나, 바닥피복으로 인한 축열이나 반사효과를 감안할 때 효율적인 바닥처리가 요망된다. \circled4 온실의 난방방식은 철골온실에서는 온수안방(47.3%)이 온풍난방(33.8%)보다 다소 많았으며, 플라스틱온실에서는 대부분 온풍난방(90.8%)이었다. 온실의 난방위치는 대부분 지상난방(89.8%)이었고 지중난방은 극소수로 나타나, 앞으로 지중난방을 통한 난방비 절감과 품질향상에 관한 실용화 연구가 요망된다. 난방용 연료는 대부분 경유(83.9%)로 나타나, 난방비를 절감할 수 있는 저가의 연료를 사용할 수 있는 난방시스템의 개발이 요청된다. \circled5 온실의 냉방방법은 차광(51.8%)과 지붕살수(33.9%)가 대부분이었으며 미스트와 포그시스템을 설치한 온실은 소수에 불과하였고, 극소수의 온실에서는 지붕위나 온실내에 지붕면과 평행하게 설치한 경우도 있었다.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.289-294
• /
• 2022

Oil contained in domestic and industrial wastewater or marine spilled oil gives rise to severe environmental pollution issues such as water pollution and ecosystem destruction. The membrane filtration method as one of representative oil/water separation strategies has technological challenges such as membrane fouling and low separation rate. In this work, we devise a 3D-printed microhydrocyclone for oil/water separation by utilizing a digital lighting processing-based 3D printer. We demonstrate that the 3D-printed microhydrocyclone can effectively separate oil and water phases from oil-in-water emulsion.

• Research in Plant Disease
• /
• v.13 no.3
• /
• pp.157-163
• /
• 2007

Hot water treatment that is the most appropriate seed disinfection method for organic vegetable farming was evaluated in this study. Among the leafy vegetable seeds lettuce that was the most sensitive to hot water was suitable to treat at $45^{\circ}C$ for 25 min, while Chinese cabbage and radish seeds were optimally treated at $50^{\circ}C$ for 25 min. The treatments resulted in similar or higher seed germination rate than non-treated seeds and promoted plant growth. In addition, fungi such as Alternaria, Aspergillus, Penicillium, or Mucor grown on the seeds were suppressed over 90% and the bacterial growth on lettuce seeds reduced 98.5% by the treatment. Among the fruit vegetable seeds pumpkin that was vulnerable to hot water was suitable to treat at $50^{\circ}C$ for 15 min, while cucumber and hot pepper seeds revealed optimum treatment at $50^{\circ}C$ for 25 min as chinese cabbage and radish. The treatment also showed similar or higher seed germination rate and growth than non-treated seeds. Furthermore, fungi such as Rhizopus, Aspergillus, Penicillium or Mucor grown on the seeds reduced from 72.0% to 95.4%. The bacterial growth on cucumber and red pepper seeds was suppressed from 65.5% to 86.0% by the treatment. Results indicated that the hot water treatment is practical for disinfection of organic vegetable seeds and the optimum temperature and soaking time varied among the seeds.

• Analytical Science and Technology
• /
• v.12 no.4
• /
• pp.318-325
• /
• 1999

Sludges from the wastewater of hanji production were analysed to see that sludges from the bleaching process, the bleach washing process, and the paper preparation process were fibrous, while sludges from the process cooking with NaOH and the process of final chemical and microbiological treatment were non-fibrous. Sludge solution from the bleaching process had the most amount of solid matters. Sludges from the bleaching process, the bleach washing process, and the final chemical and microbiological treatment process contained about 80-90 %(w/w) moisture. Owing to hypochlorite ion, pH of sludge from the bleaching process was higher than any other sludge samples. The inorganic components of sludges were determined by ICP-AES. The major inorganic component of sludge from the process cooking with NaOH was Na, while the sludge from the bleaching process had Na and Ca, major components in the final chemical and microbiological treatment process were Ca and Al. Trace amount of Mg, Fe, K, P, Mn and Ti were observed in sludges. Sludge from the bleaching process had ashes more than any other sludges. Shape of sludges observed by SEM was appeared to fibrous or crystalline, and the breadth of fibrous sludge was $5{\sim}50{\mu}m$. The sludge from the bleaching process had the most amount of matters soluble by cold and hot water and by alcohol-benzene.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.8-16
• /
• 2002

This study was performed to produce the high reactive lignin zero substrates from autohydrolyzed wood resources. In chemical compositions of used raw-materials, there were significant differences between two species, Japanese larch (Larix leptolepis) and oak (Quercus mongolica) woods. Japanese larch contained 25 to 3.5 times higher amounts of extractives than oak wood, which is mainly derived from high content of arabinogalactan in Japanese larch wood. Oak wood has 5% lower lignin content and 3% higher holocellulose and pentosans than larch wood. Concerned to changes in wood components during autohydrolysis pretreatment at 22 kg/cm² steaming pressure for 5~60 min, glucose content was constant during pretreatment, while hemicellulose and lignin were abruptly changed. Hemicellulose fraction was decreased significantly and lignin contents increased because of its condensation reaction with hemicellulose degradation products. The pH of hydrolyzates during pretreatment was decreased, reached upto pH 3 and since then leveled off. In the case of oak wood, same tendency was observed as in Japanese larch. Autohydrolysis followed by sodium chlorite and sulfite or bisulfite pretreatment was very effective in delignification of the substrates. In particular, two-stage delignification of autohydrolyzed woods with alkali and O₂-alkali resulted in very low lignin content substrates, such as 0~0.2% lignin substrate.