• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.435-436
• /
• 2015

본 논문에서는 벅 컨버터와 플라이백 컨버터를 직렬로 결합한 회로를 바탕으로 하여 높은 입력전압의 범위를 갖는 새로운 SMPS 토폴로지 및 스위칭기법을 제안하였다. 제안한 고압용 SMPS에서 벅 컨버터는 감압을 위한 온-오프 제어를 행하고, 플라이백 컨버터는 출력전압 제어를 행한다. 제안한 회로는 기존에 특정 목적을 위해 구성된 SMPS의 한계를 극복하고, 다양한 입력전압에 대해 안정된 출력전압을 제어하기 위한 토폴로지이다. 제안된 회로는 PSIM 시뮬레이션을 통하여 그 타당성을 검증하였다.

• Journal of IKEEE
• /
• v.28 no.2
• /
• pp.174-179
• /
• 2024

In this work, we introduce a complementary metal-oxide semiconductor(CMOS)-based integrated circuit(IC) measurement set-up for quantum computer control and read-out using a cryogenic refrigerator. CMOS circuits have to operate at extremely low temperatures of 3 to 5 K for qubit stability and noise reduction. The existing cryogenic measurement system is liquid helium quenching, which is expensive due to the long-term use of expendable resources. Therefore, we describe a cryogenic measurement system based on a closed cycle refrigerator (CCR) that is cost-free even when using helium gas for long periods of time. The refrigerator capable of reaching 4.7 K was built using a Gifford-Mcmahon(G-M) type cryocooler. This is expected to be a cryogenic refrigerator set-up with excellent price competitiveness.

• Journal of IKEEE
• /
• v.14 no.2
• /
• pp.90-97
• /
• 2010

The high efficiency power management IC(PMIC) with DTMOS(Dynamic Threshold voltage MOSFET) switching device and DTMOS Error Amplifier is presented in this paper. PMIC is controlled with PWM control method in order to have high power efficiency at high current level. Dynamic Threshold voltage CMOS(DT-CMOS) with low on-resistance is designed to decrease conduction loss. The control parts in Buck converter, that is, PWM control circuits consist of a saw-tooth generator, a band-gap reference circuit, an DT-CMOS error amplifier and a comparator circuit as a block. the proposed DT-CMOS Error Amplifier has 72dB DC gain and 83.5deg phase margin. also Error Amplifier that use DTMOS more than CMOS showed power consumption decrease of about 30%. DC-DC converter, based on Voltage-mode PWM control circuits and low on-resistance switching device is achieved the high efficiency near 96% at 100mA output current. And DC-DC converter is designed with Low Drop Out regulator(LDO regulator) in stand-by mode which fewer than 1mA for high efficiency.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.3 s.303
• /
• pp.33-40
• /
• 2005

In order to successfully exploit underwater resources, the first step would be a marine environmental research and exploration on the seafloor. Traditionally one sets up a long-term underwater experimental unit on the seafloor and retrieves the unit later after a certain period time. Essential to these applications is the reliable teleoperation and telemetering of the unit. This study presents ultrasonic-wave remote control system and an underwater sound recognition algorithm that can identify the sound signal without the influence of disturbances due to underwater environmental changes. The proposed method provides a means suitable for units which require low power dissipation and long-time underwater operation. We demonstrate its ability of securing stability and fast sound recognition through experimental methods.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.12-18
• /
• 2023

The current circuit technology that individually connects each qubit to a control circuit at room temperature has limitations in achieving scalability and reliability of a quantum computer. With the advent of cryogenic CMOS interconnect electronics, it is expected to dramatically improve the interconnect complexity, system reliability and size, and price. In this paper, we introduce the CMOS integrated sensing and control technology platform overcoming the problems caused by the fragile and sensitive characteristics of qubit.

• Journal of Power System Engineering
• /
• v.3 no.4
• /
• pp.36-44
• /
• 1999

회로내에 capacitor를 부가 연결시켜 이론과 실험적으로 고찰한 새로운 기법의 연구이다. 종래에 사용되어 온 전자회로는 낮은 주파수의 진동진폭을 억제할 때에 큰 inductance 값을 필요로 하는 결점이 있었다. 이런 문제점을 해결하기 위하여 본 연구에서는 강화된 압전 분권회로에 병렬로 capacitor를 연결하도록 설계하였다. 새로운 기법은 기계적인 analogy 이론에 의해 증명을 하였으며, 알루미늄 보에 대하여 필요한 동조 모드에서 실험적으로 입증하였다. 따라서 이러한 결과들은 electronic passive damping 에 있어서 예전부터 요구되어 온 절반정도의 inductance값만으로도 구조물의 진동응답을 아주 심도 있게 감소시킬 수 있다는 것을 보여주고 있다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.4
• /
• pp.298-306
• /
• 1998

MOSFET 스위치로 구현된 고역률 부스트 정류기에 적합한 무손실 수동스너버가 턴오프 및 턴온 동안에 동작하는 등가회로로 기술된다. 이러한 등가회로는 주스위치에 가해지는 과도전압, 스너버 전류, 및 턴-오프 과도시간을 예측할 수 있도록 분석된다. 제안된 스너버와 결합된 부스트 컨버터의 주 스위치는 영전류에서 턴-온되기 때문에 턴-온 손실이 거의 없고, 제한된 전압 스트레스에서 턴-오프되므로 주 스위치의 전압 스트레스에 의한 파손을 방지할 수 있다. 또한 본 스너버를 사용한 부스트 컨버터의 제어 방법이 기존의 부스트 컨버터와 동일하기 때문에 기존의 부스트 컨버터용 제어회로를 그대로 쓸 수 있다. 제안된 에너지재생 수동스너버를 갖는 고역률 정류기가 구현되고 실험결과가 제시된다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.51-52
• /
• 2006

Gabion can be used for the purpose of preventing overflow of river and side loss of road. However the manufacturing process of the gabion is manually controlled especially to the joining process at the terminal part of gabion with small diameter wire. In this paper automatic feeding guide system was designed and fabricated to make automation. The fabricated system was tested in the factory level. Pneumatic system was considered as the main idea of the feeding system. 3/2-way and 5/2-way manual control valve, eight double-acting cylinders were used. Based on the theoretical simulation and actual test the fabricated system was well controlled. The system was applied to the patent.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.19 no.3
• /
• pp.123-130
• /
• 2024

This paper proposes an EMPC (Explicit Model Predictive Controller) for temperature tracking control based on heat load prediction by an ESO (Extended State Observer) for a variable cooling circulation system with multiple indoor units connected to one outdoor unit. In this system, heat transfer and heat loss relative to the input temperature are modeled using system dynamics. Using this model, we design an EMPC based on an ESO that is robust to temperature changes and depends on airflow. To determine the stability of both the controller and the observer, asymptotic stability is verified through Lyapunov stability analysis. Finally, to validate the performance of the proposed controller, simulations are conducted under three scenarios with varying airflow, set temperature, and heat load.

• 전자공학회논문지 IE
• /
• v.47 no.1
• /
• pp.6-11
• /
• 2010

This research is the result for studding about the IR Rework station which is using a multi-wave IR-heater for soldering and de-soldering on the substrate such as PCB. This IR repair and reflow system is increasing the temperature on the target area under stable temperature control following setting point melting point of solder and lead free solder using IR-heater. So this system is not giving any therrna1 damage on the target PCB and components even closed components. The soldering and de-soldering quality is evaluated through the actual test.