• Journal of Environmental Impact Assessment
• /
• v.13 no.4
• /
• pp.187-196
• /
• 2004

매립지에서 배출되는 메탄가스는 이산화탄소에 이어 두 번째로 많이 배출되는 지구온난화 가스이지만 열을 흡수하는 능력에 있어서는 이산화탄소 보다 25에서 35배 정도 더 크기 때문에 지구 온난화 현상에 대한 메탄가스의 영향은 중요하다고 할 수 있다. 매립지로부터 배출되는 메탄가스는 호기성 상태의 매립지 복토층을 통과 할 때 산화될 수 있으므로 매립지 복토층은 메탄가스의 배출을 저감시키는 바이오필터의 역할을 할 수 있다. 본 연구에서는 batch 실험을 통하여 매립지 복토층에서의 메탄산화속도에 대한 토양수분과 온도의 영향을 연구하였다. 최대 산화속도는 토양수분 15%(w/w), 배양온도 $35^{\circ}C$의 환경조건에서 $1.03{\mu}mol\;CH_4g^{-1}soil\;h^{-1}$으로 나타났다. 이러한 실험결과를 이용하여 토양수분과 온도를 함수로 하는 회귀모형을 개발하였다. 또한 전국에 4 군데 지역을 선발하여 각 지역의 토양수분과 온도 데이타를 수집하고 개발된 모형을 이용하여 각 지역에 위치하고 있는 매립장에서의 월 평균 메탄산화량을 예측하였다. 예측 결과 환경조건이 양호한 지역의 매립지 복토는 메탄의 배출량을 저감시킬 수 있는 효율적인 바이오필터의 효과를 가지지만 환경조건이 불리한 지역의 매립지 복토에서는 바이오필터의 효과가 크지 않는다고 할 수 있다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.10
• /
• pp.1745-1753
• /
• 2001

본 연구는 한랭 환경 하에서의 인체의 국소 가온 자극이 생리, 감각반응에 끼치는 영향을 검토했다. 건강한 성인여자 7명을 대상으로, 기온 $25^{\circ}C$, 습도50%의 환경 하에서 균일한 국소 가온을 부하 했을 때 피부온, 고막온, 손가락, 발가락 혈류량, 온냉감, 쾌적감의 반응에 미치는 영향을 검토한 결과는 다음과 같다. 1) 국소가온에 의해 가온 부위 피부온은 유의하게 상승하고 가온 부위에 따라 상승도에는 유의한 차가 보였다. 2) 국소가온에 의해 고막온은 머리의 가온 시에 높은 상승, 전완의 가온 시에 상승하고, 다른 가온 부위에서는 하강의 경향이 보였다. 3) 국소가온에 의해 혈류량의 변화는 3개의 군으로 분류된다. 가온과 함께 손가락 혈류량이 증가하는 군, 발가락 혈류량이 변화하는 군, 양쪽의 혈류량이 적게 변화하는 군으로 나누어진다. 이것을 각 피험자의 평균 피부온 수준 즉 체온조절 수준과 관계 있는 것으로 논할 수 있다 4)국소 가온에 의해 각 부 위 피부온으로의 파급효과는 머리, 상완의 가온 시에 크지만 대퇴, 하퇴 다리의 가온 시에는 대부분의 부위에서 영향이 보이지는 않았다. 5) 이와 같이 국소 가온에 의 한 생리, 감각반응은 가온 부위에 따라 다르고 머리, 상완의 가온 시에는 생리반응이 크고 하퇴, 다리의 가온시에는 국소의 감각변화가 컸다.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.659-672
• /
• 1997

Thermal response induced from nonlinear temperature distribution in composite box gilder bridges depends on several variables(environmental conditions, physical and material properties, location and orientation of bridge, and cross-section geometry). In this paper, parametric study are conducted in order to find the effects of variations of seasons, location and orientation of bridge, sectional geometry and some material properties on the axial deformation, curvature and stresses in composite box girder bridge. A two-dimensional transient finite element model to conduct this parametric studies is briefly presented. Firstly, the effects of the parameters on the diurnal variation of curvature are considered, and for the time of maximum curvature, on the distribution of temperature and stresses of composite box girder sectional are considered. Finally, some considerations about the influence of the parameters on the daily maximum values of axial deformation, curvature and stresses are carried out. The influence of thermal effect on structures is important as much as the influence of live or dead load in some cases. In the design of steel composite bridges, the thermal stresses calculated on the supposition that the temperature difference between the concrete slab and steel girder is $10^{\circ}C$ and the temperature distributions are uniform in concrete slab and steel girder can be underestimated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.11 no.1
• /
• pp.189-196
• /
• 1991

The objective of this study was to investigate the effect of temperature on microbial characteristics and treatment efficiency in aerated submerged biofilm process. From the results of the research, conclusions were derived as following: 1. Biofilm density, attached biomass and biofilm thickness were $30-42mg/cm^3$, $1.2-2.7mg/cm^2$ and $380-690{\mu}m$, respectively. These were greatly affected by the variation of temperature ($5-20^{\circ}C$) and packing ratio(45-90%). 2. The ratio of suspended biomass to the total biomass in the reactor was in the range of 10 to 50 % in accordance with the variation of temperature and packing ratio. Therefore, the portion of suspended biomass cannot be neglected. 3. BOD removal efficiency increased as either temperature or biomass(suspended and attached) concentration increased. 4. The aerated submerged biofilm process appeared to be less affected by temperature variation and the estimated temperature correction coefficient of the Van't Hoff-Arrhenenius equation was 1.042.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.3
• /
• pp.1-12
• /
• 2016

In this study, the impact of sand and weathered granite soil is analyzed by changing the internal temperature from $20^{\circ}C{\sim}70^{\circ}C$C by installing a heating coil inside the triaxial cell. To check the effect on weathered granite soil due to increase of temperature and number of heating-coiling cycles are analyzed by measuring the temperature by using thermometer installed inside the triaxial cell and due to that deviator stress also occurred during the consolidated undrained test. To analyze the effect of weathered granite soil with change of temperature during undrained testing. The deviator stress and pore pressure is measured. As a result, pore pressure increases and the deviator stress decreases with rise of temperature.

• Korean Journal of Environment and Ecology
• /
• v.37 no.3
• /
• pp.192-197
• /
• 2023

This study was conducted to determine whether the difference in egg hatching temperature of Korea Reeves' turtle (Mauremys reevesii) at the artificial nursery of Seoul National Grand Park affects the incubation period and growth. A total of 201 eggs were incubated at 26 ℃ (n=89), 28 ℃ (n=75) and 32 ℃ (n=37). The incubation period of eggs showed significant differences according to the hatching temperature. In this study, the higher the hatching temperature, the higher the hatching rate. The incubation period of the eggs hatched at 26 ℃, 28 ℃ and 32 ℃ was 66.1 (±4.0, n = 52) days, 65.3 (±3.3, n = 44) days and 58.8 (±7.7, n = 31) days, respectively. Eggs incubated at 32 ℃ (83.8%) had a higher hatching success than those at 26 ℃ (58.4%) and 28 ℃ (58.7%). The body mass of 14-day-old hatchlings incubated at 32 ℃ was greater than those incubated at 26 ℃ and 28 ℃. However, there was no significant difference in the mean body mass of 180 and 270-day-old turtles hatched at these different temperatures. This study showed that the hatching temperature significantly affected the incubation period and body mass in the early life of the Korea Reeves' turtle (M. reevesii).

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.7
• /
• pp.1205-1212
• /
• 2000

The effect of temperature on the sources of organic acids and sludge when phosphorus was biologically released was evaluated in this study. The sludge used in this study was obtained from sequencing batch reactor processing the swine wastewater. Temperature is one of the most important parameters influencing the phosphorus release. As a result, the rate of phosphorus released was increased as the temperatures were increased from 5 to $30^{\circ}C$ regardless of the sources of organic acids used. Under anaerobic conditions, as acetate, propionate, glucose, and domestic wastewater were used as the sources of organic acids, the corresponding activation energy($E_a$) values were 49.83, 55.82, 54.61, and 45.44 KJ/mol, respectively. Temperature coefficient($\theta$) values were 1.0676, 1.0826, 1.0748, and 1.0698, respectively. Therefore, the rate of phosphorus released was increased as temperature was increased, whereas, the effect, of the sources of organic acids and temperature on the activation energy and temperature coefficient values were minimal. When the sludge previously adapted to acetate as external organic source was used, the activation energy and temperature coefficient values were 44.94 KJ/mol and 1.0570 respectively. The effect of temperature was minimal. These values obtained from the sludge previously adapted to acetate were smaller than those from the sludge not previously adapted to the same organic acid. This suggest that the sludge previously adapted to acetate was less dependent on temperature than that not adapted to the acetate.

• The Korean Journal of Ecology
• /
• v.25 no.2
• /
• pp.93-100
• /
• 2002

In order to analyze the life cycle of A. artemisiifolia var. elation dormancy and some environmental factors inducing germination of the seeds were examined. The results were as follows : Dormancy of fertile seeds was broken in part within a month after seed collection in case of adequate moisture and alternating temperature was also effective in breaking dormancy. The temperature range, which allow germination was 12℃ ∼ 32℃. Optimum temperature for germination was 24℃. The seed of A. artemisiifolia var. elatior was light-independent. The difference of storage period appeared to have no particular effect on the viability of seeds at any time during the 9-month storage period. In the increasing temperature(IT) regime, A artemisiifolia var. elatior seeds started to germinate at 16℃, showing the higher temperature the greater germination rate, the final germination percentage was 99.34%. On the other hand, in the decresing temperature(DT) regime, seeds began to germinate at 20℃ with the 1.34% germination. An induced dormancy occurred at 12℃ making the 5.34% fecal germination in the DT regime. Low temperature was more effective to break dormancy than higher temperature Seeds of A. artemisiifolia var. elatior seems to be germinated in mid to late autumn or germination delayed until following spring. The above results suggest these variation of germination response in diverse environmental factors seems to be a physiological strategy to maintain their existence and to reproduce in the extreme thermal variation.

• Journal of the Korean Geophysical Society
• /
• v.5 no.1
• /
• pp.9-18
• /
• 2002

We performed a long-term monitoring of self-potential(SP) using the Cu-CuSO₄non-polarizable electrode and copper-clad electrodes(CCE) in a test site in order to analyze the effects of surrounding environmental noises such as temperature, rainfall and soil moisture content on the electrodes. Analysis of the temperature dependence of the non-polarizable electrodes showed that is temperature coefficient was about +0.5 mV/°Fwhen its end was exposed to atmosphere while it was less than +0.5 mV/℃ when submerged into the subsurface, which reflects that there exists an 8 to 11 hour lag between temperatures at the depth of 15 cm and atmosphere. CCE was independent of atmospheric temperature in subsurface but showed temperature coefficient of 1.0 mV/℃ when exposed to atmosphere. Drifts of 1 to 2 mV recorded with the non-polarizable electrode directly related to the soil moisture content when it was buried in subsurface. Drift with CCE also showed similar trend to the soil moisture content, and 5 mV drift was recorded according to 5% of daily variation. The soil moisture content had strong effects on the measurement with CCE in rainfall since the flow potential is generated on the surface of the electrode.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.06b
• /
• pp.51-64
• /
• 1999

가스터빈에 사용되는 소재는 여타 금속소재에 비하여 고온 기계적 특성은 우수한 반면 상대적으로 단조성이 떨어지기 때문에, 금속소재의 단조성에 대한 이해와 단조 공정별 장단점을 파악하여 단조공정 설계에 반영하여야 한다. 가스터빈용 Ni합금의 경우 고온기계적 성질은 결정립 크기에 크게 의존한다. 결정립 크기는 기계적 성질에 직접적으로 영향을 미치는데, 동적재결정의 경우 초기 결정립크기, 변형률, 변형속도, 온도 뿐만 아니라 결정립계에 석출된 제2상에 의해서 크게 영향을 받기 때문에 이들 상의 고용온도를 파악하여 단조공정 설계에 반영하여야 한다. 유한요소법으로 변형률과 온도분포를 해석함으로써 단조품 내의 결정립 분포를 효과적으로 예측할 수 있다. 다단계 단조 경우, 최종 단조품의 결정립 크기는 단계별 단조 온도 및 변형률 배분 등에 따라 변하므로 이를 고려하여야 한다.