Loading [MathJax]/jax/output/CommonHTML/jax.js
  • Title/Summary/Keyword: 온도장 측정

Search Result 460, Processing Time 0.036 seconds

Temperature Effect on the Optical Properties of YAG and Silicate Phosphor-based White Light Emitting Diodes (온도 변화에 따른 YAG 및 Silicate형광체 기반 백색 LED의 광특성 변화에 대한 연구)

  • Choi, Hyun-Woo;Ko, Jae-Hyeon
    • Korean Journal of Optics and Photonics
    • /
    • v.24 no.3
    • /
    • pp.135-142
    • /
    • 2013
  • Two white light emitting diodes(LEDs) were fabricated by using two kinds of yellow phosphor, YAG:Ce and (Sr,Ba)2SiO4:Eu, and their spectroscopic properties were analyzed as a function of temperature from room temperature to 80C. The asymmetric double sigmoidal function was applied to both blue and yellow peaks of the emitting spectrum to obtain the center wavelength, the amplitude, the half width, and the skewness parameters. According to this analysis, the center wavelength of the blue peak shifted to longer wavelength while that of the yellow peak shifted to shorter wavelength. In addition, some of the skewness parameters were found to increase upon heating, which indicates that spectrum asymmetry becomes enhanced at higher temperatures. The changes in the color coordinates and the luminous efficacy were larger for the case of silicate-based white LED. These results suggest that the silicate-based white LED is inferior to the YAG-based white LED from the viewpoint of color stability, efficacy and color rendering index.

Effect of Arctic Oscillation and Sea Surface Temperature on Cold Surges over the Korean Peninsula (북극진동과 해수면온도가 한반도 한파에 미치는 영향)

  • Sang-Hyun An;Da-Huin Chong;Sung-Min Yeo;El Noh;Joowan Kim
    • The Korean Journal of Quaternary Research
    • /
    • v.33 no.1_2
    • /
    • pp.37-48
    • /
    • 2021
  • The cold surge is an important extreme weather in East Asia during winter, and is largely affected by behavior of the Siberian high Arctic Oscillation, which represents undulation of large-scale pressure pattern in the Arctic region. Recent studies also revealed that the synoptic low pressure system developing in the eastern boundary of the Asian continent is sensitive to sea surface temperature (SST) and plays an important role in strengthening the cold advection over the Korean Peninsula during cold surges. In this study, we analyzed the Arctic Oscillation affecting the large-scale background of cold surge in East Asia, and the sea surface temperature in the coast of East Asia is examined focusing on its role on synoptic low-inducing cold advection. For the analysis, the days with the bottom 3% of the average daily temperature, measured at five surface stations in Korean Peninsula during 49 years (1969/70-2017/18), were used for the cold surge cases. During the negative phase of the Arctic Oscillation, a strong trough is observed over East Asia, and the inflow of cold air from the polar region is strengthened, which lead to frequent cold surges. In addition, anomalously high SST in the eastern coast of Asia increases sensible and latent heat release from the ocean, therefore, it enlarges the likelihood of synoptic low-inducing extreme cold surges.

Reagent Cabinet Hazard Situation Identification System Utilizing Multiple Sensor Data (다중 센서 데이터를 활용한 시약장 위험상황 식별 시스템)

  • Lee, Hyunju;Choi, Hyungwook;Jung, Hoekyung
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.22 no.1
    • /
    • pp.63-68
    • /
    • 2018
  • Recently, safety accidents that occur in laboratories have occurred in various forms, so that a system that can reduce safety accidents in laboratories is required. The existing system identifies the danger situation according to the change of the temperature and the humidity, but the type of the danger situation is not known and the operation of the device is manually performed. Therefore, in this paper, we propose a system that identifies the danger situation of a reagent cabinet using multiple sensors and automatically operates the device. The internal environment of the reagent cabinet is measured in real time through the sensors and the sensor data is used to identify the danger situation. Also, when a danger situation is identified, the appropriate device is selected and operated automatically. In this way, identification of the danger situation of the reagent cabinet and automatic operation of the device will reduce the safety accidents occurring in the reagent cabinet.

A Study in Packing of Changran-Jeotgal -1. Shelf-life of a Jar Packing in Changran-Jeotgai- (창란젓갈의 포장에 관한 연구 -1. 병포장 젓갈의 품질유지기한-)

  • Yoon Ji Hye;Lee Won Dong;Chang Dong-Suck;Kang Ji Hee;Lee Myung Suk
    • Korean Journal of Fisheries and Aquatic Sciences
    • /
    • v.35 no.1
    • /
    • pp.8-14
    • /
    • 2002
  • Quality variation of jar packing of Chanran-Jeotgal produced by improved process and conventional process were investigated during storage at 10, 20, and 30C, respectively. The increasing rate of pH, volatile basic nitrogen (VBN), CO2, and viable cell counts of Chanran-Jeotgal produced by improved process was slower than that of conventional process at all storage temperature. Also the result of sensory evaluation indicate that the production of Changran-Jeotgal by improved process may extend the shelf·life of jar packing Chanuan-Jeotgal. From above results, relationship between quality parameters was concluded. In case of Changran-Jeotgal in a jar, pressure, pH, L-value, VBN and sensory score were highly correlated. Therefore, these parameters are expected to use as shelf-life indication.

Application of Numerical Model for the Effective Design of Large Scale Fire Calorimeter (화재발열량계의 효율적 설계를 위한 수치해석 모델의 적용)

  • Kim, Sung-Chan
    • Fire Science and Engineering
    • /
    • v.24 no.6
    • /
    • pp.28-33
    • /
    • 2010
  • The present study develops a numerical model based on the computational fluid dynamics technique to analyse the thermal flow characteristics of large scale fire calorimeter and examine the characteristics of primary parameters affecting on the uncertainty of heat release rate measurement. ANSYS CFX version 12.1 which is a commercial CFD package is used to solve the governing equations of the thermal flow field and the eddy dissipation combustion model and P-1 radiation model are applied to simulate the fire driven flow. The numerical results shows that the horizontal duct system with 90 bend duct was shown relatively high deviated asymmetric flow profiles at the sampling location and the deviation of the velocity field was higher than that of the temperature and species quantities. The present study shows that the computational model can be applicable to optimize the design process and operating condition of the large scale fire calorimeter based on the understanding of the detail flow field.

Instrumentation for Performance Test of Turbo Compressor (터보 압축기 성능시험을 위한 계측기기 선정)

  • Park, Tae-Choon;Kang, Young-Seok;Yang, Soo-Seok
    • Aerospace Engineering and Technology
    • /
    • v.7 no.2
    • /
    • pp.46-52
    • /
    • 2008
  • The instrumentation was studied in order to measure aerodynamic performance and efficiency of a compressor as a component of a 5MW-class gas turbine for power generation. In case of an axial compressor, the distributions of static pressure on a casing can be obtained by averaging at each stage and those of total pressure and temperature in the flow field of the compressor can be measured with a Kiel temperature probe. In case of a centrifugal compressor, the static pressures at the hub and the tip, respectively, of an impeller exit are considerably different, so the pressures need to be measured at both positions and thereafter averaged. The distributions of static pressures in a diffuser and a deswirler are measured at ten positions along five streamlines in one pitch. In addition the flow field can be measured in detail by 5-hole Pitot tube in order to analyze the flow characteristics of the core flow region and wake region and the rotor-stator interaction of the compressor.

  • PDF

Magnetic Properties of the Y1Ba2Cu3xSnxO7y HighTC Superconductor (고온 초전도체 Y1Ba2Cu3xSnxO7y의 자기적 특성 연구)

  • 이성규;이주일;김문석;유성초;임우영;백종성
    • Journal of the Korean Magnetics Society
    • /
    • v.1 no.2
    • /
    • pp.15-21
    • /
    • 1991
  • The magnetic properties of the Y1Ba2Cu3xSnxO7y superconductor were studied as a function of Sn concentration by utilizing both the vibrating sample magnetometer (VSM) and torque magnetometer. Unlike the cases where Fe and Co were substituted for Cu, the superconducting transition temperature was maintained above 90 K until x reached the value of 0.36. The lower critical field Hc1(T) and upper critical field Hc2(T) are measured as a function of temperature and external magnetic field, respectively. By aid of these results, Hc1(0).(Hc2(0)), the coherence length ε0, the penetration depth λ0, and the Ginzburg-Landau parameter k were oqtained. Flux pinning was also observed in the sample.

  • PDF

플라즈마 화학 기상 증착 시스템을 이용한 저온, 저압 하에서 SiN, SiCN 박막 제조

  • Seo, Yeong-Su;Lee, Gyu-Sang;Byeon, Hyeong-Seok;Jang, Ha-Jun;Choe, Beom-Ho
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2014.02a
    • /
    • pp.371.1-371.1
    • /
    • 2014
  • 반도체 트랜지스터의 크기가 점점 미세화 함에 따라 이에 수반되는 절연막에 대한 요구 조건도 까다로워지고 있다. 특히 게이트 산화 막의 두께는 10 nm 이하에서 고밀도를 갖는 높은 유전율 막에 대한 요구가 증가되고 있으며 또한 증착 온도 역시 낮아져야 한다. 이러한 요구사항을 충족하는 기술중의 하나는 매우 낮은 압력 및 200도 이하 저온에서 절연막을 증착하는 것이다. 본 연구에서는 플라즈마 화학 기상 증착(PE-CVD) 시스템을 이용하여 180C의 온도 및 10 mTorr의 압력에서 SiN 및 SiCN 박막을 제조하였다. 박막의 특성은 원자층 증착 공정 결과와 유사하면서 증착 속도의 향상을 위해 개조된 사이클릭 화학 기상 증착 공정을 이용하였다. Si 전구체와 산화제는 기판에 공급되기 전에 혼합되어 1차 리간드 분해를 하였으며, 리간드가 일부 제거된 가스가 기판에 흡착되는 구조이다. 기판흡착 후 플라즈마 처리 공정을 이용하여 2차 리간드 분해 공정을 수행하였으며, 반응에 참여하지 않은 가스 제거를 위해 불활성 가스를 이용하여 퍼지 하였다. 공정 변수인 플라즈마 전력, 반응가스유량, 플라즈마 처리 시간은 최적화 되었다. 또한 효율적인 리간드 분해를 위해 ICP와 CCP를 포함하고 있는 이중 플라즈마 시스템에 의해 2회에 걸쳐 분해되어지고, 그 결과로 불순물이 들어있지 않는 순수한 SiN과 SiCN 박막을 증착하였다. XRD 측정 결과 증착된 박막들은 모두 비정질 상이며, 550 nm 파장에서 측정한 SiN 및 SiCN 박막의 굴절률은 각 각 1.801 및 1.795이다. 또한 증착된 박막의 밀도는 2.188 (g/cm3)로서 유전체 박막으로 사용하기에 충분한 값임을 확인하였다. 추가적으로 300 mm 규모의 Si 웨이퍼에서 측정된 비 균일도는 2% 이었다. 저온에서 증착한 SiN 및 SiCN 박막 특성은 고온 공정의 그것과 유사함을 확인하였고, 이는 저온에서의 유전체 박막 증착 공정이 반도체 제조 공정에서 사용 가능하다는 것을 보여준다.

  • PDF

ITER 블랑켓 시험모듈(TBM)의 액체형 증식재 성능 시험용 루프 설계 및 제작

  • Yun, Jae-Seong;Lee, Dong-Won;Bae, Yeong-Deok;Kim, Seok-Gwon;Hong, Bong-Geun
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2010.02a
    • /
    • pp.281-281
    • /
    • 2010
  • ITER 블랑켓 시험모듈(TBM)의 액체형 증식재 성능 시험용 루프의 설계를 완료하였고 현재시험용 루프를 제작 및 설치중이다. 액체형 증식재 성능 시험용 루프의 핵심 구성 부품인 액체 저장용 탱크, 전자석, EM 펌프들과 이들 장치들의 전원장치 및 제어장치를 제작 완료하였다. 액체형 증식재 성능 시험용 루프 설치를 위한 데크를 제작하였으며, 제작된 실험 데크의 총 지지하중은 10 톤 이상이다. 루프설치대 위에 성능 시험용 루프가 설치되며 루프 설치대는 3m×2.4m 의 직사각형으로 제작되었으며, 실험 종료 및 유지 보수 시 액체증식재의 drain을 고려하여 전체 루프는 각도 조절이 가능하도록 제작되었다. 루프내의 유량을 측정하기 위한 유량계, 전자석 자장의 변화에 따른 압력의 변화를 측정하기 위한 차압센서가 전자석의 양단에 설치되며, 시험용 루프에 흐르는 액체금속(PbLi) 및 루프관의 온도를 측정하기 위한 열전대가 설치된다. 루프 설치대를 기울였을 때 루프의 최상부에 액체금속 저장고 및 레벨센서를 설치하여 루프 내에 액체금속이 가득 채워졌는지를 레벨센서로 확인하며 루프 내에 잔존하는 기체가 저장고를 통하여 외부로 배출되게 하였다. 액체형 증식재 성능 시험용 루프 설치 후 실험은 고체 상태의 PbLi를 액체 저장용 탱크에 장착한 후 탱크의 열선의 온도 제어에 의한 PbLi의 용융점 확인, 시험용 루프에서의 전자펌프 성능 평가 등의 시험의 기본적인 실험을 수행한 후 자기장 환경에서 MHD 평가, 증식재의 순도 유지, 구조재의 부식 등의 시험을 수행할 예정이다.

  • PDF

Meteorological Factor Analysis of Algific Talus Slope and Distribution of Rare and Vulnerable Plants to Climate Change (풍혈의 미기상요인분석과 희귀 및 기후변화 취약식물 분포 연구)

  • Tae-Young Hwang;Jong-Won Lee;Ho-Geun Yun;Jong-Bin An
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2022.09a
    • /
    • pp.58-58
    • /
    • 2022
  • 본 연구는 국내 6곳의 풍혈의 기능과 식물분포를 통하여 풍혈의 보전대책과 관리방안을 위한 기초자료를 확보하기 위해 진행하였다. 조사는 홍천 방내리, 정선 여탄리, 정선 운치리, 연천 동막리, 제천 금수산, 보은 구병산에 위치하는 풍혈 6곳을 선정하였고 풍혈에 기상측정장비를 설치하여 2021년 3월부터 2022년 3월까지 온도와 습도의 미기상요인을 측정하였다. 풍혈이 위치하는 지역의 미기상요인은 기상청 자료를 활용하였고 측정된 풍혈의 미기상요인과 비교 분석하였으며, 관속식물상은 계절별로 진행하여 각 풍혈에 서식하는 희귀식물과 북방계식물, 기후변화 취약식물을 분석하였다. 풍혈 6곳의 미기상요인 분석결과 온도는 보은 구병산 풍혈을 제외한 5곳의 풍혈은 여름철 냉혈의 기능을 나타냈고, 보은 구병산 풍혈은 겨울철 온혈의 기능을 하는 것으로 나타났으며, 습도는 6곳 모두 주변 지역보다 높게 나타났다. 멸종위기종 2급은 백부자, 산작약, 연잎꿩의다리 3분류군, 희귀식물은 산개나리, 월귤 등 23분류군, 북방계식물은 과남풀, 꽃개회나무 등 129분류군, 기후변화취약식물은 검종덩굴, 도깨비부채 등 23분류군으로 확인되었다. 풍혈은 기후변화 취약식물의 피난처로서 역할을 하는 것으로 나타났으나 산림유전자원보호구역으로 지정된 홍천 방내리 풍혈을 제외한 나머지 풍혈은 관리가 미흡하다. 정선 여탄리 풍혈은 인근 도로에서의 외래식물의 유입, 정선 운치리 풍혈은 인근의 양봉장과 관광객 등의 인간활동에 의한 훼손, 연천 동막리 풍혈은 인근 경작지 등의 사유지로 인한 관리의 어려움, 제천 금수산 풍혈은 관광지화로 인한 훼손, 보은 구병산 풍혈은 등산객의 답압으로 인한 훼손이 진행되고 있는 것으로 나타났다. 이에 따라 풍혈과 희귀 및 기후변화 취약식물들의 정기적인 모니터링과 풍혈 주변의 팬스 설치 등의 적극적인 보전방안이 필요하다고 판단된다.

  • PDF