• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2005

Nanocrystalline Nd-Fe-B powder was synthesized by a new thermochemical process that combined with past reduction-diffusion process and spray-dry process. In this process, Ca reduction process is vary important due to formation of hard magnetic$Nd_{2}Fe_{14}B$ phase from various oxides by Ca powder. Therefore, the final products are essentially affected a shape, size, and composition etc. of the Ca reduced powders. Ca reduction was performed to way that raw powders just mixed with Ca powder in proper ratio unlike to compress into compact. The powders after mixture-type Ca reduction mainly composited with $Nd_{2}Fe_{14}B$ phase even relativily low reaction temperature ($800^{\circ}C$) and all particle size of powder were distributed less than 1 ${\mu}m$ except for powder after Ca oxides as magnetic properties of powders after cake-type Ca reduction, with the consequence that high magnetic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca ruduction, with the conseqence that high magnatic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca reduction process showed $_iH_c$ = 5.9 kOe, $B_r$ = 5.5 kG, (BH)max = $Nd_{2}Fe_{14}B{\to}Nd_{2}Fe_{17}B$ decomposition by violent exothermic reaction during washing.

• Journal of Korea Water Resources Association
• /
• v.56 no.2
• /
• pp.103-113
• /
• 2023

The river confluence is a section in which two rivers with different topographical and hyrodynamic characteristics are combined into one, and it is a section in which rapid flow, inflow of sediments, and hydrological topographic changes occur. In the confluence section, the flow of fluid occurs due to the difference in density due to the type of material or temperature difference, which is called a density flow. It is necessary to accurately measure and observe the confluence section including a certain section of the main stream and tributaries in order to understand the mixing behavior of the water body caused by the density difference. A comprehensive analysis of this water mixture can be obtained by obtaining flow field and flow rate information, but there is a limit to understanding the mixing of water bodies with different physical properties and water quality characteristics of rivers flowing with stratigraphic flow. Therefore, this study attempts to grasp the density flow through the water temperature distribution in the confluence section. Among the extensive data of the river, vertical data and water surface data were acquired, and through this, the stratification phenomenon of the confluence was to be confirmed. It was intended to analyze the mixed pattern of the confluence by analyzing the water mixing pattern according to the water temperature difference using the vertical data obtained by measuring the repair volume by installing the ADCP on the side of the boat and measuring the real-time concentration using YSI. This study can supplement the analysis results of the existing water quality measurement in two dimensions. Based on the comparative analysis, it will be used to investigate the current status of stratified sections in the water layer and identify the mixing characteristics of the downstream section of the river.

• Resources Recycling
• /
• v.16 no.3 s.77
• /
• pp.19-26
• /
• 2007

The bottom ash of municipal solid waste incineration generated during incineration of municipal solid waste in metropolitan area consists of ceramics, glasses, ferrous materials, combustible materials and food waste and so on. Although the ferrous material was separated by the magnetic separation before the incineration process, of which content accounts for about $3{\sim}11%$ in bottom ash. The formation of a $Fe_3O_4-Fe_2O_3$ double layer(similar to pure Fe) on the iron surface was found during air-annealing in the incinerator at $1000^{\circ}C$. A strong thermal shock, such as that takes place during water-cooling of bottom ash, leads to the breakdown of this oxidation layer, facilitating the degradation of ferrous metals and the formation of corrosion products and it existed as $Fe_2O_3,\;Fe_3O_4\;and\;FeS_2$. So, many problems could occur in the use of bottom ash as an aggregate substitutes in construction field. Therefore, in this study, the separation of ferrous materials from municipal solid waste incineration bottom ash was investigated. In the result, the ferrous product(such as $Fe_2O_3,\;Fe_3O_4,\;FeS_2$ and iron) by magnetic separator at 3800 gauss per total bottom ash(w/w.%) accounted for about 18.7%, and 87.7% of the ferrous product was in the size over 1.18 mm. Also the iron per total bottom ash accounted for about 3.8% and the majority of it was in the size over 1.18 mm.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.19 no.2
• /
• pp.118-126
• /
• 1986

Vibrio vulnificus is a recently recognized halophilic organism that nay cause serious human infections. Patients infected with V. vulnificus often have a history of exposure to the sea, suggesting that the organism may be common inhabitant of marine environment. The purpose of this experiment is to investigate the distribution and bacteriological characteristics of V. vulnificus. The strain used in this experiment was isolated from sea water and sea products such as common octopus (Octopus variabilis), ark shell (Anadara broughtonii), blue crab (Ericheir japonica), and sea squirt (Synthia roretzi) collected in Pusan area from July to October in 1985. V. vulnificus was frequently isolated in August when temperature of sea water was around $26^{\circ}C$ and rarely isolated in October when temperature of sea water was around $18.5^{\circ}C$. The distinctive biochemical characteristics of V. vulnificus were ONPG hydrolysis positive and fermented lactose and not grown in peptone water contained $8\%$ NaCl. The optical density at 660 nm of the growth of V. vulnificus was reached maximum level after 8 hours of culture at $35^{\circ}C$ in brain heart infusion broth but that of V. vulnificus was little increased at $15^{\circ}C$ for 14 hours. Optimum temperature and pH for the growth of V. vulnificus were around $35^{\circ}C$ and 8.0. The specific growth rate and the generation time of V. vulnificus isolated from the samples were $1.21\;hr^{-1}$, 34 min at $35^{\circ}C$ and $0.61\;hr^{-1}$, 69 min at $25^{\circ}C$, respectively. V. vulnificus did not grow on eosin-methylene-blue agar, salmonella-shigella agar, deoxycholate agar but grew well on Endo agar, xylose-lysine-deoxycholate agar and hektoen enteric agar. On Endo agar, the colonies of V. vulnificus were red and achieved a diameter of 2 to 4 mm as a feature enabling differentiation of V. vulnificus from other Vibrio spp. V. vulnificus grow well on TCBS agar forming green colonies. V. vulnificus refrigerated at $4^{\circ}C$ exhibited a linear decline of its viablity as 1 log cycle in every 16 hours storage, while V. vulnificus freezed at $-18^{\circ}C$ almost became extinct.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.682-692
• /
• 2013

We investigated out the effect of cultivation region on the physicochemical characteristics of starch in six sweetpotato cultivars. The following sweetpotato cultivars were analyzed: Daeyumi, Shingeonmi, Jinhongmi, Shinyulmi, Yulmi, and Yeonhwangmi. Samples were cultivated in Muan, Iksan, Nonsan, Boryeong and Hamyang. The soil texture was found to be sandy loam in Muan, Iksan, and Boryeong, sandy clay loam in Nonsan, and loam in Hamyang. The starch content of the sweetpotato was higher in Muan than in Hamyang. The amylose content was 22.3-30.9%, and the highest amylose content was found in samples from Iksan. Rapid viscosity analysis showed that the samples from Hamyang had the lowest values of pasting temperature, while samples of the Daeyumi cultivar had the highest values. Thermal analysis with a differential scanning calorimeter showed that the Muan samples had the highest values of onset temperature, maximum peak temperature, and completion temperature, and the samples from Hamyang had the lowest values. There was no difference between the cultivation regions or the cultivar in the X-ray pattern of the starch or its appearance in scanning electron micrographs. Therefore, the results of this study confirm that cultivation region and cultivar play an important role in determining the quality of sweetpotato and the physicochemical characteristics of sweetpotato starch.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.191-197
• /
• 2018

This study investigated the influence of starch extraction (ST-EX) solutions on the extraction yield and characteristics of Chinese yam (CY) starches from domestic Dioscorea batatas. Ascorbic acid (VitC), $Na_2S_2O_3$, $NaHCO_3$, and $Na_2CO_3$ were used as ST-EX solutions (0.4%, w/v). The extracted CY starches were examined for ST-EX yield, chemical composition, size distribution, X-ray diffraction, solubility, swelling power, gelatinization, and pasting viscosity. The highest ST-EX yield was obtained from $NaHCO_3$, followed by VitC. Lower protein content, relative crystallinity, and gelatinization enthalpy were found in CY starches from alkaline ST-EX solutions ($NaHCO_3$ and $Na_2CO_3$). Size distribution and gelatinization temperature did not generally differ for CY starches from the different ST-EX solutions. Pasting viscosities increased in the order from $Na_2CO_3$ > $Na_2S_2O_3$ > $NaHCO_3$ > VitC ST-EX solutions. Thus, VitC may be most appropriate to extract CY starch from Dioscorea rhizomes, considering its ST-EX yield, total starch content, and variation in pasting viscosity.

• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.554-560
• /
• 1991

The physicochemical properties of Korean yam starches (D. aimadoimo, D. batatas and D. japonica) were investigated. The mean granular size of starches were 23.5 μm for D. aimadoimo, 23.9 μm for D. batatas and 18.2 μm for D. japonica. Amylose content, blue value and water binding capacity was $29{\sim}33%,\;0.42{\sim}0.51%\;and\;109.9{\sim}118.3%$, respectively. The optical transmittance of 0.3% (dry basis) yam starch suspensions were increased at $70{\sim}75^{\circ}C$ and D. japonica showed typical two-step transmittance curve. The swelling power and solubility patterns increased over $60^{\circ}C$, and D. aimadoimo was the highest values. Amylogram patterns of 5% (dry basis) yam starch suspensions, determined by Brabender amylograph, were similar to that of yam flours and the viscosity of D. aimadoimo had 630 BU, which was about 5 times higher than 130 BU for D. batatas and D. japonica. Observation under scanning electron microscope lefted marks of resistance to glucoamylase because these surfaces were similar to the natural granules. In rates of solubiliazation by dimethyl sulfoxide, D. aimadoimo showed the highest value. (3-Amylolysis limits of yam starches and their amylose were $71.8%{\sim}75.5%\;and\;90.2{\sim}92.1%$, respectively. Gel filtration patterns of debranched amylopectin by pullulanase were divided into 3 peaks. The weight ratios of peak III to peak II in yam starches were $2.15%{\sim}2.42%$.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.6
• /
• pp.31-39
• /
• 2009

This study has found that there is a reverse phase with interdecadal variation in temporal variations of tropical cyclone (TC) genesis frequency (TCGF) between Northwest sector and Southeast sector, based on climatological mean tropical cyclone genesis location over the western North Pacific. The TCGF in the Northwest sector has been increased since the mid 1980s (1986-2005), while TCGF in the Southeast sector was higher until the early 1970s (1951-1970). The analysis of a difference between 1986-2005 and 1951-1970 showed results as follows: i) Through the analysis of vertical wind shear (VWS) and sea surface temperature (SST), less VWS and higher SST in the former (latter) period was located in the Northwest (Southeast) sector. ii) In the analysis of TC passage frequency (TCPF), TCs occurred in the Northwest sector frequently passed from east sea of the Philippines, through East China Sea, to Korea and Japan in the latter period, while TCs in the former period frequently has a lot of influences on South China Sea (SCS). In the case of TCs occurred in the Southeast sector, TCs in the west (east), based on $150^{\circ}E$ had a high passage frequency in the latter (former) period. In particular, TCs during the latter period frequently moved toward from the east sea of the Philippines to SCS and southern China. iii) This difference of TCPF between the two periods was characterized by 500 hPa anomalous pressure pattern. Particularly, anomalous cyclonic circulation strengthened over the East Asian continent caused anomalous southerlies along the East Asian coast line from the east sea of the Philippines to be predominate. These anomalous winds served as steering flows that TC can easily move toward same regions.

• Korean Journal of Environment and Ecology
• /
• v.29 no.3
• /
• pp.333-343
• /
• 2015

This research aims at identifying the goshawk's possible and replaceable breeding ground by using the MaxEnt prediction model which has so far been insufficiently used in Korea, and providing evidence to expand possible protection areas for the goshawk's breeding for the future. The field research identified 10 goshawk's nests, and 23 appearance points confirmed during the 3rd round of environmental research were used for analysis. 4 geomorphic, 3 environmental, 7 distance, and 9 weather factors were used as model variables. The final environmental variables were selected through non-parametric verification between appearance and non-appearance coordinates identified by random sampling. The final predictive model (MaxEnt) was structured using 10 factors related to breeding ground and 7 factors related to appearance area selected by statistics verification. According to the results of the study, the factor that affected breeding point structure model the most was temperature seasonality, followed by distance from mixforest, density-class on the forest map and relief energy. The factor that affected appearance point structure model the most was temperature seasonality, followed by distance from rivers and ponds, distance from agricultural land and gradient. The nature of the goshawk's breeding environment and habit to breed inside forests were reflected in this modeling that targets breeding points. The northern central area which is about $189.5 km^2$(2.55 %) is expected to be suitable breeding ground. Large cities such as Cheongju and Chungju are located in the southern part of Chungcheongbuk-do whereas the northern part of Chungcheongbuk-do has evenly distributed forests and farmlands, which helps goshawks have a scope of influence and food source to breed. Appearance point modeling predicted an area of $3,071 km^2$(41.38 %) showing a wider ranging habitat than that of the breeding point modeling due to some limitations such as limited moving observation and non-consideration of seasonal changes. When targeting the breeding points, a specific predictive area can be deduced but it is difficult to check the points of nests and it is impossible to reflect the goshawk's behavioral area. On the other hand, when targeting appearance points, a wider ranging area can be covered but it is less accurate compared to predictive breeding point since simple movements and constant use status are not reflected. However, with these results, the goshawk's habitat can be predicted with reasonable accuracy. In particular, it is necessary to apply precise predictive breeding area data based on habitat modeling results when enforcing an environmental evaluation or establishing a development plan.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.119-129
• /
• 2004

This paper is designed to report the results of development and validation procedures in relation to the Freeway Incident Management System (FIMS) prototype development as part of Intelligent Transportation Systems Research and Development program. The central core of the FIMS is an integration of the component parts and the modular, but the integrated system for freeway management. The whole approach has been component-orientated, with a secondary emphasis being placed on the traffic characteristics at the sites. The first action taken during the development process was the selection of the required data for each components within the existing infrastructure of Korean freeway system. After through review and analysis of vehicle detection data, the pilot site led to the utilization of different technologies in relation to the specific needs and character of the implementation. This meant that the existing system was tested in a different configuration at different sections of freeway, thereby increasing the validity and scope of the overall findings. The incident detection module has been performed according to predefined system validation specifications. The system validation specifications have identified two component data collection and analysis patterns which were outlined in the validation specifications; the on-line and off-line testing procedural frameworks. The off-line testing was achieved using asynchronous analysis, commonly in conjunction with simulation of device input data to take full advantage of the opportunity to test and calibrate the incident detection algorithms focused on APID, DES, DELOS and McMaster. The simulation was done with the use of synchronous analysis, thereby providing a means for testing the incident detection module.