• Journal of Food Hygiene and Safety
• /
• v.23 no.4
• /
• pp.304-308
• /
• 2008

We investigated temperature management for refrigerated foods in large discount markets, department stores, and convenience stores. Eleven stores in the Seoul area were used to examine temperature maintenance for frozen and refrigerated foods, including soybean curds (tofu), fish surimi, mook, wet noodles, kimbab, and salads. The surficial and central temperatures of foods in a refrigerator and a freezer were examined. While the difference between the highest ($7.5^{\circ}C$) and the lowest ($6.4^{\circ}C$) temperature spaces in a refrigerator was $1.1^{\circ}C$, the corresponding difference between the highest ($8.9^{\circ}C$) and lowest ($7.5^{\circ}C$) food surface temperatures was $1.4^{\circ}C$. The average temperatures of both chilled food surfaces and refrigerator spaces were $7^{\circ}C$ (max. $22.9^{\circ}C$) and 8.2 degrees C (in. $-0.4^{\circ}C$), respectively. The temperatures of chilled food surfaces were $6.1{\times}10.6^{\circ}C$ for soybean curds, $6{\sim}12.3^{\circ}C$ for fish paste, $2.3{\times}18.2^{\circ}C$ for kimbab, $4.6{\times}12.2^{\circ}C$ for salads, $3.4{\times}12.6^{\circ}C$ for wet noodles, and $7.1{\times}19^{\circ}C$ for mook. Our results indicate that chilled foods require careful management for storage at temperatures below $10^{\circ}C$ with careful recording of the warmest area of the refrigerator.

• Spatial Information Research
• /
• v.22 no.1
• /
• pp.55-63
• /
• 2014

Near surface air temperature data which are one of the essential factors in hydrology, meteorology and climatology, have drawn a substantial amount of attention from various academic domains and societies. Meteorological observations, however, have high spatio-temporal constraints with the limits in the number and distribution over the earth surface. To overcome such limits, many studies have sought to estimate the near surface air temperature from satellite image data at a regional or continental scale with simple regression methods. Alternatively, we applied various Kriging methods such as ordinary Kriging, universal Kriging, Cokriging, Regression Kriging in search of an optimal estimation method based on near surface air temperature data observed from automatic weather stations (AWS) in South Korea throughout 2010 (365 days) and MODIS land surface temperature (LST) data (MOD11A1, 365 images). Due to high spatial heterogeneity, auxiliary data have been also analyzed such as land cover, DEM (digital elevation model) to consider factors that can affect near surface air temperature. Prior to the main estimation, we calculated root mean square error (RMSE) of temperature differences from the 365-days LST and AWS data by season and landcover. The results show that the coefficient of variation (CV) of RMSE by season is 0.86, but the equivalent value of CV by landcover is 0.00746. Seasonal differences between LST and AWS data were greater than that those by landcover. Seasonal RMSE was the lowest in winter (3.72). The results from a linear regression analysis for examining the relationship among AWS, LST, and auxiliary data show that the coefficient of determination was the highest in winter (0.818) but the lowest in summer (0.078), thereby indicating a significant level of seasonal variation. Based on these results, we utilized a variety of Kriging techniques to estimate the surface temperature. The results of cross-validation in each Kriging model show that the measure of model accuracy was 1.71, 1.71, 1.848, and 1.630 for universal Kriging, ordinary Kriging, cokriging, and regression Kriging, respectively. The estimates from regression Kriging thus proved to be the most accurate among the Kriging methods compared.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.1
• /
• pp.18-27
• /
• 2009

The purpose of this study is to understand the scale of temperature change following large-scale urban developments in paddy fields to present possible measures to preserve suburban area paddy fields and to lower the scale of temperature increase after developing paddy fields in urban areas. The study was conducted in Bupyeong and Bucheon of Incheon Metropolitan City. The satellite image($1989{\sim}2000$) before and after the development of old paddy fields were used to analyze the land surface temperature changes according to the land use types. Building coverage, green coverage, non-permeable pavement coverage, and floor area ratio(FAR) were selected as the factors that influence urban temperature changes and the temperature estimation model was constructed by using correlation and regression analyses. The before and after satellite images of Bupyeong and Bucheon were classified into forests, greens and plantations, paddy fields, unused lands, and urban areas. The results indicate that most of the paddy fields that existed in the center of Bupyeong and Bucheon were converted into unused lands which were undergoing construction to become new urban areas. The difference between the surface temperatures of May 17th, 1989 and May 7th, 2000 was analyzed to reveal that most land converted from paddy fields to unused lands or urban areas saw an increase in surface temperature. Han River was used as a comparison to analyze the average surface temperature changes($1989{\sim}2000$) in former paddy fields. The scale of temperature changes were: $+1.6697^{\circ}C$ in urban parks; $+2.5503^{\circ}C$ in residential zones; $+2.9479^{\circ}C$ on public lands, $+3.0385^{\circ}C$ in commercial zones, and $+3.1803^{\circ}C$ in educational zones. The correlation between building coverage, green coverage, non-permeable pavement coverage, or floor area ratio(FAR) and surface temperature increases was also analyzed. The green coverage to temperature increases, but building coverage, non-permeable pavement coverage, and floor area ratio(FAR) had no statistically significant temperature increases. The factors that influence urban temperature changes were set up as independent variables and the surface temperature changes as dependent variables to construct a surface temperature change model for the land use types of former paddy fields. As a result of regression analysis, green coverage was selected as the most significant independent variable. According to regression analysis, if farmland is converted into an urban area, a temperature increase of $+3.889^{\circ}C$ is anticipated with 0% green coverage. The temperature saw a decrease of $-0.43^{\circ}C$ with every 10% increase of green coverage.

• Journal of The Korean Astronomical Society
• /
• v.10 no.1
• /
• pp.23-30
• /
• 1977

We have collected times of minimum light available in the literature for WZ Andromedae and analyzed the nature of the period variations. The O-C diagram of WZ And clearly shows that two abrupt changes near JD 2418000 and JD 2435000 are deduced by dp/p=$+4.24{\timesa}10^{-6}$ and dp/p=$-2.46{\times}10^{-6}$, respectively. For these period changes, we have introduced the equations which represent mass exchange in the close binery systems given by Biermann and Hall (1973), and the computation yieleled a mass flow of $7.42{\times}10^{-5}M$. from the hotter component to the cooler one. Due to the amount of mass flow, the period decrease may also be calculated. The theoritical new period after JD 2435000 became 0.69565858 days, which is in good agreement with the value 0.69566034 days found in the O-C diagram. In this computation, the mass ratio of WZ And suggested that the hotter star is the filling its Rochclooe, and thus WZ And is in Paczynski's stage II.

• Fire Science and Engineering
• /
• v.26 no.6
• /
• pp.72-77
• /
• 2012

When the concrete and steel combined composite beam is exposed to high temperature, concrete could delay temperature rising of steel by covering or increase heat capacity of structural member. For becoming of structural reinforcing by unification between materials, fire resistance rate of composite beam would be higher than simple steel beam. The temperature rising of exposed steel of composite beam is directly related with section shape and exposure length of steel. In this study, fire resistant tests were carried out for composite beams and steel beam with same thickness of spray-type fire resistant materials in standard fire, and after that, temperature histories were analysed and compared with shape factor. The correlation between steel temperature and shape factor was showed very high. This result suggests that if it can be predict the comparative advantage of member by factor which cause the performance enhancement, it could be conclude that an Standard Accreditation method can be adjust to members without indivisual certifiicate of accreditation.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.1
• /
• pp.52-59
• /
• 2001

The fixation characteristics of CCA and CCFZ in Japanese red pine, Japanese larch, and ezo spruce sapwood were compared at various temperatures and fixation conditions (drying and nondrying fixation). Fixation was monitored by the rates of reduction of hexavalent chromium to trivalent one, and optimal fixation time was estimated based on the results. The rate of fixation was highly temperature dependent, and the fixation rate of treated wood conditioned under nondrying conditions was much more faster than that under drying conditions, especially when the moisture content of treated wood was below fiber saturation point. Preservative types affected fixation; CCA-Type B had the highest fixation rate, followed by CCA-Type C and then CCFZ. The differences in fixation rates of preservative components were also observed among wood species; Japanese red pine fixed the fastest, followed by Japanese larch and then ezo spruce. Time required to complete fixation according to the fixation temperature could be predicted successfully using the regression equations between the temperatures and fixation time, regardless of conditioning methods, preservative types, and wood species.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.49-53
• /
• 1995

The tea red spider mite has recently outbroken as the major pest of tea at tea plantation area in southern part of Korea. This study was carried out to investigate some development of the tea red spider mite. The results were summarized as follows: 1. The body length and width of adult female and male were 0.40mm and 0.22mm, and 0.31mm and 0.20mm, respectively. 2. Durations of immature stage of females were 24.8 days at $16^{\circ}C$, 17.0 days at $20^{\circ}C$, 11.0 days at $24^{\circ}C$, 8.2 days at $28^{\circ}C$, and 6.7 days at $32^{\circ}C$. 3. The average longevities of female of the tea red spider mite were 31.5 days at $16^{\circ}C$, 13.4 days at $20^{\circ}C$, 8.4 days at $24^{\circ}C$, 7.8 days at $28^{\circ}C$, and 5.8 days at $32^{\circ}C$.

• Korean Journal of Poultry Science
• /
• v.17 no.2
• /
• pp.127-133
• /
• 1990

This study was undertaken to find out the effect of heating time and temperature, pH and NaCl concentration on the heat stability of egg albumen gel during heat treatment. With the transient decrease at 110-$130^{\circ}C$, hardness of heat-set albumen gel was increased as the heating temperature increased. The cohesiveness showed similar trend as well. The lightness was decreased while the yellowness was increased as the heating time and temperature increased. Heat-set albumen gel showed maximum hardness at pH 4.5-5.0 and pH 9.0 High heat treatment($120^{\circ}C$, 30min) showed higher hardness at alkaline range compared to low heat treatment($96^{\circ}C$, 30min.). Color of the albumen gel was relatively dark at acidic range and bright at alkaline range. High heat treatment caused darker albumen gel at alkaline range and brighter albumen gel at acidic range. The addition of NaCl increased hardness and cohesiveness of the albumen gel and improved the lightness after high heat treatment regardless of NaCl concentration.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.1041-1046
• /
• 2012

In this study, we performed experimental tests on five SP-100 aluminum powder epoxy specimens with several after-curing conditions in order to estimate their hardness with temperature and compressive strength. In the surface hardness test, it was found that the higher the after-curing temperature, the higher was the hardness. In particular, it was found that the hardness of the specimens in cases 3 and 4 was much higher than in the other cases. In addition, in the compression tests carried out to evaluate the compressive strength, it was found that the specimens showed relatively similar stiffness and strength with after-curing, and specimens with no after-curing showed compression stress-strain curves similar to those of thermoplastic resins.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.5
• /
• pp.305-311
• /
• 2019

In this study, we examined the proper spacing between the expansion joints according to the temperature load of the inter-modal terminal platform infrastructure to implement a new inter-modal automated freight transport system, which we intend to introduce in Korea. To review the proper expansion joint spacing of the terminal platforms, we set the maximum expansion joint spacing according to the regional temperature changes using the equation proposed by the Federal Construction Council (FCC) of the United States. Then, the maximum displacement value, which was calculated through the structural analysis program, and the limit of the horizontal displacement of the building structure were compared. The proper expansion joint spacing was selected as the slab length at which the maximum displacement of the structure, due to temperature changes, was below the horizontal displacement limit. Based on the application of maximum expansion joint spacing for each region calculated through the FCC's suggestion, the maximum displacement that could occur within the limit of the lateral displacement of the structure was determined.