• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.1
• /
• pp.51-57
• /
• 2014

Ultrasonic imprinting is a novel process for replicating micropatterns on thermoplastic polymer substrates with low energy consumption and short cycle time. The polymer substrate is softened by the frictional heat and repetitive deformation energy under ultrasonic excitation; thus, a number of micropatterns are replicated on the softened polymer substrate. In the present work, the effect of mold temperature on the replication characteristics of ultrasonic imprinting is investigated. The temperature change in the patterned region is measured by varying the mold temperature. Numerical simulation is then performed for investigating pattern replication characteristics under various mold temperatures. In addition, pattern replication ratio and uniformity are compared through various experimental measurements. Through the results of these comparisons, it is found that the mold temperature has a significant positive effect on the replication characteristics of ultrasonic imprinting.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.214-218
• /
• 2011

In this study, we have systematically investigated the effect of sputtering conditions on the microstructural properties of Ag/CoFeB thin film on MgO substrate. It was found that the crystallinity and surface roughness of the Ag film strongly depends on the Ar sputtering pressure and sputtering power. Epitaxial growth of Ag(100) film on MgO(100) substrate was achieved under the sputtering conditions of high sputtering power and elevated temperature. XRR (X-ray reflectivity) and high-resolution TEM (transmission electron microscopy) measurements also revealed the interfacial roughening in the Ag/CoFeB interface due to the island structure formation and intermixing between Ag and CoFeB.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.12 no.3
• /
• pp.297-304
• /
• 1983

The water content, respiration rate, solid, and starch contents in the potate tuber of May Queen and Namjak stored at $5^{\circ}C$ and $20^{\circ}C$ were determined during 27 week period. Changes in appearance of the surface and internal tissue also were observed. The dormancy period of May Queen stored at $5^{\circ}C$ and $20^{\circ}C$ was 12 seeks, but Namjak at $5^{\circ}C$ and $20^{\circ}C$ were 9 weeks and 21 weeks, respectively. Greening developed from 12 weeks in the tuber of May Queen at $5^{\circ}C$ and browning of Namjak stored at $5^{\circ}C$ was observed from 6 weeks. In both potatoes stored at $20^{\circ}C$, the rates of respiration were higher than those stored at $5^{\circ}C$, and the rates increased continuously after sprouting at $20^{\circ}C$ but maintained at the low level at $5^{\circ}C$. Solid and starch contents of Namjak were always higher than those of May Queen during 27 weeks, but the levels did not change significantly with time. Solid and starch contents at $20^{\circ}C$ maintained at higher level than at $5^{\circ}C$.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.1
• /
• pp.79-89
• /
• 2019

The field measurement and laboratory experiment were conducted to investigate the effect of reducing the surface temperature of the functional aspect of the heat island phenomenon of the permeable block which is made the recycled synthetic resin rather than the existing concrete permeable block. Field measurement was taken for 3 days in consideration of dry condition and wet condition and laboratory experiment was divided into dry condition, rainfall simulating condition, and wetting condition. The variations of temperature and the evaporation rate of water moisture content after experiment were confirmed. As a result of field measurement, it is confirmed that the surface temperature decreases due to the difference in albedo of the pore block surface rather than the cooling effect due to the latent heat of vaporization. The evaporation of moisture in a dry state where drought persisted or a certain level of moisture was not maintained in the surface layer. As a result of laboratory experiment, resin permeable block gives higher surface temperature when it is dry condition than concrete permeable block, but the evaporation of water in the pore is kept constant by capillary force in rainfall simulation condition, and higher temperature reduction rate. As a result of measuring the evaporation rate after laboratory experiment, it is confirmed that the effect of reducing temperature is increased as the evaporation rate of water is higher. Based on these results, correlation formula for evaporation rate and temperature reduction rate is derived.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.23 no.6
• /
• pp.939-944
• /
• 1994

The change of major organic acid contents were examined in mackerel, pacific yellow croaker and brown sole on heating conditions. The organic acid contents of mackerel were the higher that the others. The content of lactic acid was the highest in all samples commonly and that of succinic acid was second level and these organic acids were over 95% of total organic acid. The content of ${\alpha}-ketoglutaric$ acid was higher acid content was greater with higher heating temperature. Decreasing of organic acid content was higher at steamed and first heating than warmed and rewarmed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.199-199
• /
• 2010

XRR(X-ray reflectometry)은 나노 스케일 박막의 두께를 측정하는 유망한 도구로 인식되고 있고, XRR측정 결과의 신뢰성을 향상시키기 위하여 많은 연구가 이루어지고 있다. 본 연구에서는 나노 스케일 박막 두께의 정확한 측정을 위해 Si기판 위에 성장시킨 $HfO_2$, $Al_2O_3$, $Ta_2O_5$의 산화물 박막에 대하여 여러 가지 전처리 조건을 변화시켜 조건에 따른 반사율 곡선의 변화와 분석 결과를 살펴보았다. 샘플의 전처리에는 acetone, sulfuric acid, methanol, 초음파세척기를 이용하였고, 전처리가 끝난 후 샘플에 남아있는 수분기를 제거하기 위하여 약 $150^{\circ}C$의 온도로 가열 후 측정비교 분석하였다. 전처리 시 solution과 시간 등의 전처리 조건이 변화함에 따라 X-선 반사율 곡선의 변화가 있음을 알 수 있었고, 이에 따라 XRR 측정 분석 시 두께에 영향을 받았으며, TEM과 XPS를 이용하여 전처리 영향에 대하여 비교 분석 하였다. 이번 연구를 통하여 전처리 방법에 따라 XRR 측정에 정확성을 향상 시킬 수 있는 있는 것으로 보여진다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.629-632
• /
• 2008

As concrete is a material which is subject to wide quality fluctuations by temperature, grip of seasonal feature and maintenance of ambient temperature and humidity to secure the quality required after casting concrete are able to keep away from harmful effects. In case of summer, a high temperature has caused rapid hydration reaction of cement in early age, which has caused to decrease strength by autogenous shrinkage. Therefore we need to consider a countermeasure for decrease in the hydration heat of hot-weather concrete, according to minimize water and cement content and use mineral admixtures In this experimental research, the compressive strength development for replacement ratio of mineral admixtures, curing temperature and methods of concrete was investigated to confirm the effects of mixture design and curing condition on compressive strength of concrete.

• Composites Research
• /
• v.31 no.6
• /
• pp.385-391
• /
• 2018

In this study, carbon fibers were fabricated via carbonization of oxidized polyacrylonitrile (oxi-PAN) under different carbonization conditions. Carbonization of oxi-PAN fiber was performed under four different temperature (1300, 1400, 1500, $1600^{\circ}C$) with four different fiber tensions (14, 25, 35, 45 MPa). Effect of carbonization process on the structural development and mechanical properties of carbon fiber were characterized by single filament fiber tensile test and Raman spectroscopy. A clear correlation exists between the Raman spectrum and the tensile modulus of carbon fiber and effect of carbonization temperature on the tensile modulus showed increased tendency only at higher fiber tension (${\geq}25MPa$) while tensile strength showed decreased or random tendency. Therefore, it may be concluded that the optimization of carbonization temperature of oxi-PAN fiber also requires optimization of fiber tension.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.8
• /
• pp.757-762
• /
• 2011

We investigate the transient temperature response in biological tissue whose surface is exposed to alternately varying sinusoidal oscillation. Based on the Pennes bio-heat equation, we apply numerical analysis using a finite element method to find the effects of the physical properties of the skin layers. Three layers of tissue-epidermis, dermis, and subcutaneous-are considered as the solution region. We investigate the effects of different properties of the skin layers on the temperature profile. We also investigate the effects of the perfusion rate for the dermis, which is the most sensitive layer. The results show that the temperature profile of tissue depth has a discontinuous point when different physical properties are used.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.312.2-312.2
• /
• 2013

태양전지에서 SiNX층은 반사방지막 역할과 표면 페시베이션의 역할을 동시에 하고 있다. SiNx에서 굴절율과 두께는 반사율과 밀접한 관계가 있으며 동시에 표면 소수캐리어 수명에도 큰 영향을 미친다. 따라서 굴절율과 두께를 조절하여 낮은 반사도와 긴 소수캐리어 수명을 가지는 SiNx 박막을 제조하여야 우수한 효율의 태양전지를 제조할 수 있다. 본 연구에서는 다양한 굴절율과 두께의 SiNx 박막을 결정질 실리콘 태양전지에 적용하여 효율과의 상관관계를 해석하였다. SiNx 박막은 PECVD장비를 이용하여 RF파워, 가스혼합량, 증착시간 등을 각각 변화시키며 형성하였다. RF 파워는 100~500 W로 변화 시켰고 혼합가스 변화는 SiH4가스와 NH3가스, Ar가스를 각각 주입하며 증착하였다. RF 파워 300W, 가스혼합량 SiH4 90sccm, NH3 26sccm, Ar 99sccm과 기판 온도 $300^{\circ}C$, 공정시간 58초에서 포면 반사율 1.09%와 굴절률 1.965, 두께 76nm를 갖는 SiNx층을 형성 할 수 있었다. SiNx층을 증착하여 셀을 제작한 결과, 개방전압: 0.612V, 전류밀도: 38.49 mA/cm2, 충실도: 75.62%, 효율: 17.82%를 얻을 수 있었다.