• Korean Journal of Optics and Photonics
• /
• v.8 no.5
• /
• pp.415-419
• /
• 1997

A novel fiber optic sensor is demonstrated using a FBG in PM(Polarization-Maintaining) fiber. Gratings have been written in a Bow-Tie type fiber using the phase mask. The operation of the sensor simply involves monitoring back-reflected Bragg wavelengths from the grating. Since PM fiber has two principal semi-axes with two indices of refraction, two Bragg wavelengths were observed. We have observed the position of Bragg wavelengths for PM FBG shifted simultaneously by either applying the longitudinal strain or temperature change. The wavelength sensitivity of 1.2pm/$\mu$$\varepsilon$ about a longitudinal strain and the wavelength sensitivity of 11.4pm/$^{\circ}C$ about a temperature have been experimentally achieved. The wavelength sensitivity of both longitudinal strain and temperature are approximately same with the reported values for the single mode FBG. On the other hand, the change of separation between Bragg wavelengths was observed by the applying transverse stress. We observed that the separation between two Bragg wavelengths is proportional to the applied transverse stress. The wavelength sensitivity of 14.6 pm/N about a transverse stress has been achieved. We have demonstrated PM FBG sensors can measure the transverse stress independently from the effects of temperature.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1067-1071
• /
• 2008

장기적인 수자원정책을 수립하기 위해서는 강수, 증발산, 유출 등의 물수지의 변동성을 평가하는 것이 중요하다. 특히 기후변화로 인한 기온 증가는 증발산량에 영향을 미칠 것이다. 따라서 기후변화에 따른 수자원의 영향을 신뢰성 있게 평가하기 위해서는 증발산량의 산정방법에 대한 불확실성을 평가하는 것이 필요하다. 본 연구에서는 다섯 가지의 증발산량 산정방법에 대해 기온 및 강수변화에 따라 증발산량 계산과 유출량산정에 미치는 영향을 평가하였다. 안동댐 유역에 대해 준분포형 수문모형인 SLURP를 이용하여 기온과 강수변화에 따른 5가지 증발산량 산정방법의 민감도를 분석하였다. SLURP 모형에서는 Penman-Monteith method, Morton CRAE method, Spittlehouse/Black method, Granger method, Linacre method의 다섯 가지방법을 제시하고 있고, 관측 자료에 대해 검 보정을 수행한 결과 5개의 증발산량 산정법 모두 안동댐 유역에 대해 잘 모의하는 것으로 나타났다. 기온과 온도를 변화시킨 합성시나리오에서 Linacre 방법이 다른 방법들과 비교하여 높은 민감도를 나타내었는데 증발산량 산정법별 구조적 차이가 원인 것으로 판단되어 추가적인 연구가 진행 중이다. 결과적으로 각 증발산량 산정방법에 따른 민감도 차이는 기후변화 영향평가 결과의 불확실성을 제시하는 척도가 될 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.141-152
• /
• 1993

A generalized method is presented for shape design sensitivity analysis of axisymmetric thermal conducting solids. The shape sensitivity formula of a general performance functional arising in shape optimal design problem is derived using the material derivative concept and the adjoint variable method. The method for deriving the formula is based on standard axisymmetric boundary integral equation formulation. It is then applied to obtain the sensitivity formulas for temperature and heat flux constraints imposed over a small segment of the boundary. To show the accuracy of the sensitivity analysis, numerical implementations are done for three examples. Sensitivities calculated by the presented method are compared with analytic sensitivities for two examples with analytic solutions, and compared with sensitivies by finite difference for a cooling fin example.

• Korean Journal of Optics and Photonics
• /
• v.32 no.6
• /
• pp.259-265
• /
• 2021

Recently, lens manufacturing and assembly technology has greatly improved. However, tight requirements of manufacturing and assembly lead to an increase in cost and manufacturing time, and in some cases the performance of an optical system may deteriorate depending on the operating environment's conditions, such as temperature or vibration. In addition, the use of a compensator is an effective method to reduce sensitivity in an ultra-precision optical system, but in the case of a small lens, such as that in an endoscope, it is difficult to use a compensator due to the size limitation of the lens barrel. Therefore, minimizing lens sensitivity is the most important technology in lens design. For this reason, there have been various attempts to reduce the lens sensitivity, and there is a trend to add functions to reduce the sensitivity in the lens design S/W. In this paper, we introduce a design technology that minimizes lens sensitivity. We first design a lens with quite good performance, then analyze the sensitivity of this lens, make a multi-configuration with high-sensitivity element error, and then reoptimize it. We prove with an example that this design technique is very effective.

• Tunnel and Underground Space
• /
• v.19 no.3
• /
• pp.203-212
• /
• 2009

The prediction of near field behavior around an underground high-level radioactive waste repository is important for the repository design as well as the safety assessment. In this study, a sensitivity analysis for seven parameters consisted of design parameters and material properties was carried out using a three-dimensional finite difference code. From the sensitivity analysis, it was found that the effects of borehole spacing, tunnel spacing, cooling time and rock thermal conductivity were more significant than the other parameters. For getting a statistical distribution of buffer and rock temperatures around the repository, an artificial neural network, backpropagation, was applied. The reliability of the trained neural network was tested with the cases with randomly chosen input parameters. When the parameter variation is within ${\pm}10%$, the prediction from the network was found to be reliable with about a 1% error. It was possible to calculate the temperature distribution for many cases quickly with the trained neural network. The buffer and rock temperatures showed a normal distribution with means of $98^{\circ}C$ and $83.9^{\circ}C$ standard deviations of $3.82^{\circ}C$ and $3.67^{\circ}C$, respectively. Using the neural network, it was also possible to estimate the required change in design parameters for reducing the buffer and rock temperatures for $1^{\circ}C$.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5A
• /
• pp.255-266
• /
• 2012

Main cable of a suspension bridge is the important member which shows the overall structure integrity at bridge completion. Configuration of main cable is a free hanging state at cable erection completion and is different from that at bridge completion supporting the dead loads such as hanger, girder, and so on. Accordingly, the configuration control under cable erection is considerably significant because the configuration at cable erection completion has direct influence on that at bridge completion. That is performed by sag adjustments at center, side span and tension adjustments at anchor span. The former needs the sag sensitivity which represents the control quantity of strand length corresponding to that of sag. The latter requires the tension sensitivity which shows the change of strand tension according to that of strand temperature. In this study, the fundamental equations of cable were derived with the assumption of either catenary or parabola shape, the differential-related equations using chain rule on horizontal tension were drawn from those and finally the estimation methods of the sag / tension sensitivity were proposed from both those. The nonlinear numerical analysis flow charts of sag sensitivity based on the catenary equations were proposed and the sag sensitivities grounded on the differential-related equations were compared with the results using them for various parameters of sag change. Also, considering the combinations of sag change parameters, the calculation method of the final variation for the cable sag was suggested. For the real suspension bridge under construction with PPWS method, the sag/tension sensitivity were estimated considering the construction conditions like the change of PPWS length, PPWS temperature, bridge span, etc.. We hope that this study will be a systematic guideline for the configuration control under main cable erection and improved highly by field verification in the real bridge site.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.349-357
• /
• 2007

The most sensitive part of the installed optical fiber fable is the optical loss variation of the splicing part according to the environmental changes. This paper presents the details of the experimental results of the external environmental changes on optical loss, such as bending, temperature variation, temperature variation after water osmosis and vibration. Through the bending test of optical fiber, rapid increase of optical loss was measured within the radius of 30mm. The result of optical loss variation within the temperature range of $-30^{\circ}C{\sim}60^{\circ}C$ is less than 0.02dB. It was confirmed that the maximum optical loss increased up to 0.2dB in case of water osmosis within the temperature range of $-40^{\circ}C{\sim}80^{\circ}C$. There is small optical loss variation of 0.01dB under the 1mm vibration test. The experimental results of this paper can be used as the reference data for the design of the optical fiber cable splicing enclosure to protect the optical loss variation due to environmental changes.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1265-1266
• /
• 2015

본 논문에서는 PMF와 FBG로 구성된 PDL 기반 사냑 간섭계를 이용하여 편광 간섭형 광섬유 압력 센서를 구현하였다. 여러 종류의 PMF들에서 압력 민감도를 비교하기 위해, 서로 다른 세 종류의 보우-타이형 PMF를 센서부로 사용하였다. 구현된 광섬유 압력 센서를 이용하여 0~0.3 MPa의 범위에서 압력 측정을 수행하였으며, 최대 압력 민감도는 근사적으로 -15.07 nm/MPa로 측정되었고, 센서의 선형성을 나타내는 $R^2$값은 ~0.992로 측정되었다. 제안된 센서는 FBG를 이용하여 외부 온도 변화의 보상이 가능하면서도, 이전의 편광유지 광자결정 광섬유 기반 압력 센서에 비해 압력 민감도를 4배까지 증가시킬 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1226-1228
• /
• 1997

펄스 레이저 증착법을 이용하여 MgO 기판 위에 YBCO 박막을 c 축으로 성장시켰다. 이를 위하여 다양한 두께의 YBCO 박막을 여러 온도에서 증착시킴으로서 두께와 온도에 따른 YBCO 박막의 방향성을 조사하였다. 레이저원으로는 Nd:YAG 레이저의 355 nm의 파장을 이용하였으며, 증착시 기판온도는 $700^{\circ}C$와 $750^{\circ}C$에서 박막의 두께를 $3,000{\AA}$, $10,000{\AA}$, $20,000{\AA}$ 등으로 변화시켜 증착하였다. 이렇게 증착되어진 박막의 표면은 SEM으로 관촬되어졌으며, Raman Spectrascopy로 박막을 분석하였고, XRD를 사용하여 그 박막의 배향성을 연구하였다. 본 논문에서는 이와 같은 분석과 연구를 통하여 증착되어진 다성분 박막의 배향성이 기판온도와 박막두께에 따라 민감하게 변화함을 체계적으로 분석하였으며, 그 결과 기판온도와 박막 두께에 따른 YBCO 박막의 a 축, c 축 성장의 의존성을 확인하였다.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.150-153
• /
• 2006

점탄성 복합재는 간단한 작업으로 큰 감쇠 효과를 볼 수 있어 사용이 날로 늘어나고 있다. 그런데 점탄성 복합재의 특성은 온도에 민감하게 반응하며 변화한다. 그러므로 점탄성 복합재의 모드해석 시 온도 변화에 따른 해석이 필요하다. 본 논문에서는 한쪽면에 점탄성재를 부착한 Oberst beam을 일단고정 상태로 설치하여 실험 온도를 $-15{\sim}45^{\circ}C$로 변화시켜가며 전달함수를 이용하여 실험모드해석을 실행하였다. 그리고 온도 차이에 따른 모드형상을 비교하였다.