• Tunnel and Underground Space
• /
• v.30 no.3
• /
• pp.242-255
• /
• 2020

The numerical simulations of Heater Experiment-D (HE-D) at the Mont Terri rock laboratory in Switzerland were performed to investigate an applicability of FLAC3D to reproduce the coupled thermo-hydro-mechanical (THM) behaviour in Opalinus Clay, as part of the DECOVLEX-2015 project Task B. To investigate the reliability of numerical simulations of the coupled behaviour using FLAC3D code, the simulation results were compared with the observations from the in-situ experiment, such as temperature at 16 sensors, pore pressure at 6 sensors, and strain at 22 measurement points. An anisotropic heat conduction model, fluid flow model, and transversely isotropic elastic model in FLAC3D successfully represented the coupled thermo-hydraulic behaviour in terms of evolution for temperature and pore pressure, however, performance of the models for mechanical behavior is not satisfactory compared with the measured strain.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.105-113
• /
• 2008

Solar radiation induces non-uniform temperature distribution in the bridge structure depending on the shape of the structure and shadows cast on it. Especially in the case of curved steel box girder bridges, non-uniform temperature distribution caused by solar radiation may lead to unusual load effects enough to damage the support or even topple the whole curved bridge structure if not designed properly. At present, it is very difficult to design bridges in relation to solar radiation because it is not known exactly how varying temperature distribution affects bridges; at least not specific enough for adoption in design. Standard regulations related to this matter are likewise not complete. In this study, the thermal behavior of curved steel box girder bridges is analyzed while taking the solar radiation effect into consideration. For the analysis, a method of predicting the 3-dimensional temperature distribution of curved bridges was developed. It uses a theoretical solar radiation energy equation together with a commercial FEM program. The behavior of the curved steel box girder bridges was examined using the developed method, while taking into consideration the diverse range of bridge azimuth angles and radii. This study also provides reference data for the thermal design of curved steel box girder bridges under solar radiation, which can be used to develop design guidelines.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.33-36
• /
• 2006

The kinetics of photopolymerization of urethane-acrylate oligomer which has many applications in photopolymerizable adhesives was analysed to investigate the influence of polymerization temperature and functionality of oligomer using the autocatalytic model. It was revealed that the maximum polymerization rate decreased as the polymerization temperature increased. The reaction rate constant, k, showed little change with the increase in polymerization temperature, while exponents m and n exhibited an increase. These results could be related to the diffusion and mobility restriction of reactive species during the cross-linking reaction. The decrease in photopolymerization rate with increase of temperature was mainly controlled by the reaction order n.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.397-402
• /
• 2020

Collagen type I is the most abundant protein in the human body. It shows viscoelastic behavior, which is what confers tendons with their viscoelastic properties. There are two different temperature setting methods in molecular dynamics simulations, namely rescaling and reassignment. The rescaling method maintains the temperature by scaling the given temperature, while the reassignment method sets the temperature according to a Maxwell distribution at the target temperature. We observed time-dependent behavior when the reassignment method was applied in tensile simulation, but not when the rescaling method was applied. Time-dependent behavior was observed only when the reassignment method was applied or when one side of the collagen molecule was stretched to a greater extent than the other side. As result, the collagen is elongated to 80nm, 100nm, 130nm, and 180nm, respectively, when the collagen is pulled by different velocities, 0.5, 1, 2, and 5 Å/ps, up to 40 Å. The results do not provide a detailed physical explanation, but the phenomena illustrated in this result are important for caution when further simulations are performed.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.95-98
• /
• 1998

완화형 강유전체인 0.9MPb*Mg$_{1}$3/Nb$_{2}$3/)O$_{3}$-0.1PbTiO$_{3}$에서 강유전-상유전 상전이에 수반되는 relaxation거동을 살펴보기위해 낮은 전계에서 측정된 유전특성과 높은 전계에서 측정된 전계유기 분극 거동 등을 조사하였다. -50-9$0^{\circ}C$의 상전이 온도범위에 걸쳐 1V/mm의 낮은 전계에서 측정된 유전특성의 온도의존성을 구하고 수 kVmm의 강전계하에서 발생된 분극의 온도의존성을 관찰하였다. 이 모든 결과들은 Vogel-Fulcher관계식에 비교적 정확하게 일치되었으며 그 결과 T$_{f}$ 는 294.6˚K로 나타났다. 본 연구결과를 통하여 Vogel-Fulcher관계식에 의한 주파수 의존성은 낮은 전계하에서의 유전특성 뿐 아니라 강전계하에서의 여러물성들도 동일하게 적용되는 것을 확인할 수 있었다.

• Computational Structural Engineering
• /
• v.4 no.2
• /
• pp.95-102
• /
• 1991

Some sections of concrete highway pavements have been viewed with great concern by highway officials and engineers due to the severe cracking and failure problems. This is mainly due to the traffic loads in addition to temperature variations between top and bottom of concrete slab, which cause the concrete slab to curl up and down depending on the thermal gradient, respectively. Subsequently, a major consideration was given to the derivation of stiffness matrix and equivalent nodal loads due to the uniform gravity load, temperature and shrinkage of concrete. And the structural behavior of concrete highway pavement due to the temperature variations throughout the nations has been emphasized.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.195-195
• /
• 2003

PDP, FED 등의 디스플레이와 각종 IC 칩부품에 적용 가능한 저융점 유리 프릿 중에서 환경규제가 이루어지고 있는 납성분이 포함되어 있지 않은, Bi계 유리 프릿의 열적 거동 연구를 행하였다. 열처리 온도에 따른 열거동에 따라 프릿의 소성온도 및 미세구조가 결정되므로, 열처리 온도에 따른 유리 프릿의 젖음각을 측정하였고, DTA와 TMA를 통해 유리전이온도, 연화점, 열팽창계수 변화 경향성을 관찰하였다. 본 연구에서 제조된 유리는 조성에 따라 전이온도가 390-50$0^{\circ}C$, 연화점이 400-55$0^{\circ}C$, 열팽창계수가 65-120$\times$10-7/$^{\circ}C$ 범위를 나타내었으며, 고온현미경 측정 결과 Pb-계 유리와 비교시 유사한 열거동을 나타내었다.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.149-160
• /
• 1993

표면성장법을 이용한 고강력, 고탄성률 섬유의 제조시, 결정화 온도에 따른 섬유 미 세구조와 물리적 성질의 상관 관계를 미세구조적, 열역학적 관점에서 규명하고자 초고분자 량 폴리에틸렌으로 섬유를 제조하고 결정화 온도에 따른 구조와 인장 성질의 변화를 용융 거동을 중심으로 관찰하였다, 일정길이하에서의 섬유의 용융인 제한 용융에서는 고분자 사 슬배좌의 구속으로 인해 사방정계-육방정계 전이가 일어났다 제한 용융 거동으로부터 라멜 라 구조와 펼쳐진 사슬 결정 부분을 분리할 수 있었으며 결정화 온도가 증가할수록 펼쳐진 사슬 결정의 양이 증가하였다. 결정화 온도가 증가할수록 쉬시-케밥구조에서 펼쳐진 사슬 구조로의 변화가 일어났으며 결정내의 결점도 줄어들었다. 결정화 온도가 증가할수록 구조 의 변화로 인해 인장 성질이 향상되었다. 인장 성질은 펼쳐진 사슬 결정의 양에 큰 영향을 받았다. 인장 강도는 펼쳐진 사릉의 양과 사슬내의 결점들에 의해 큰 영향을 받았으며 인장 탄성계수와 절단 신도는 인장 강도보다 펼쳐진 사슬의 양에 더 크게 영향 받았다.

• Korean Journal of Crystallography
• /
• v.12 no.3
• /
• pp.157-161
• /
• 2001

The observe relaxation phenomena and freezing behavior in Pb(Mg/sub ⅓/Nb/sub ⅔/O₃, relaxor ferroelectrics, weak electric-field properties as well as strong electric-field properties were investigated. The temperature dependence of the dielectric properties obtained using the low electric-field of 1 V/w was investigated. The dielectric properties obtained from the slope of the dielectric hysteresis loop and the temperature dependence of the pyroelectric properties were also investigated. When fitting all the experimental data with the Vogel-Filcher relation, a close agreement between the experimental data and equation was observed. The freezing temperature could be consistently calculated by the various methods.

• Journal of the Korean Magnetics Society
• /
• v.8 no.4
• /
• pp.179-184
• /
• 1998

Colossal magnetoresistance is closely related to (but is not) the abrupt change of electrical resistivity in the vicinity of Curie temperature, which is caused by the temperature dependent paramagnetic-ferromagnetic phase transition and concurrent change of electrical conducting mechanism. A resistivity-temperature equation is presented to fully describe the overall behavior, especially the abrupt change. The main ingredients of the equation are a simple effective media theory and a function for the temperature dependent fraction of ferromagnetic phase. The model fits very well to the measured resistivity-temperature curve of $La_{0.7}Ca_{0.3}MnO_3$.