• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.44-50
• /
• 2007

The objective of this study was to investigate the influence of the vehicle resin on the coating performance of Dan-Chung. The starch glue (F), fish glue (G), and aqueous acrylic resin emulsion (E) were used as vehicle resins. Panels coated with Dan-Chung were tested at accelerated weathering and outdoor conditions. Aqueous acrylic resin was proved as an excellent vehicle resin for Dan-Chung, because there was no flaking in Dan-Chung film after accelerated weathering and outdoor exposure. Discoloration of Dan-Chung using E was the smallest among the acceleratedly weathered panels. Adhesive property of Dan-Chung film using G was. remarkably improved by G-undercoating. On the contrary, G-undercoating lowered adhesive property of Dan-Chung film using E.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.3
• /
• pp.261-268
• /
• 2022

In this study, Long-term test specimens were tested in the outdoor exposure environment and the carbonation properies of concrete were analyzed. The test specimens were manufactured in 40 %, 50 % and 60 % according to the w/c ratio. Carbonation was measured at 3 years and 15 years of age. Based on the results, long-term carbonation prediction models(KICT model) were derived. As a result, carbonation increased according to the w/c. Based on the w/c 40 %, w/c 50 % increased about 1.8 times and w/c 60 % increased about 3.7 times. Comparison of carbonation according to age was that the carbonation at 15^th year was about 3 times higher that of 3^rd year. As results of comparing the KICT models and other carbonation prediction models, the carbonation prediction showed different values.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.131-133
• /
• 2003

폴리머애자는 기존 자기애자에 비하여 많은 장점을 가지고 있어 세계적으로 사용량이 증가하고있다. 그러나 폴리머재질을 사용함으로써 열화과정을 거치게 되어 있다. 폴리머애자의 장기신뢰성 및 수명 예측을 위하여 븐 연구에서는 복합가속열화시험장치에 의한 모의 열화시험, 현장 애자의 주기적인 발취 시험, 옥외 실증시험장에서의 애자상태 감시 둥을 통하여 폴리머애자의 장기신뢰성을 검증할 계획이다. 또한 새로운 장기 신뢰성 평가방법에 대한 연구도 진행될 것이다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.2
• /
• pp.32-36
• /
• 1977

Experiments were conducted to know the effects of seed bed temperatures on the sprouting of seeds and seedling growth in the phytotron and field. Sprouting of seeds were most uniform when seed bed was stored under the straw and vinyl mulching for 48 hours after seed bed temperature increased up to 3$0^{\circ}C$ by the sun. In the phytotron, optimum temperature was 32$^{\circ}C$ for sprouting and day/night temperature of 25/30 and 20/15$^{\circ}C$ for greening and hardening of seedlings, respectively. In the field, the best results were obtained under the conditions of sprouting in the seedling chamber heated by electricity and greening the hardening under the double vinyl tunnel in the upland nusery bed.

• Applied Chemistry for Engineering
• /
• v.24 no.2
• /
• pp.138-143
• /
• 2013

This paper studied the possibility to predict a mechanical property variation from changes in created carbonyl bands by irradiating the surface of high-density polyethylene with short-wavelength ultraviolet radiation of 254 nm to induce a fast chemical degradation. The meaning of this study lies in checking whether a mechanical property change with the same chemical property as the induced optical deterioration is caused by using a UVC lamp with high photon energy instead of optical deterioration via xenon arc light source and outdoor exposure test via natural sunlight requiring a long time. The mechanical strength of high-density polyethylene checked by a tensile test and a creep destruction test showed a similar tendency with CI changes. In particular, the yield strength and elongation had a close relationship with the exposure time to ultraviolet radiation. Accordingly, this paper presented a method to grasp the mechanical property change outdoors requiring a long time more fast through the relationship between the mechanical property change and the carbonyl index using a UVC lamp causing the fast surface degradation.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3151-3153
• /
• 2000

현재 국내에서 사용되는 교통신호등용 전구는 전량 해외에서 수입하는 백열전구로써 발열에 의한 낮은 발광 효율과 짧은 수명으로. 전력의 과소비와 과중한 전력요금 부담. 잦은 유지보수로 관리비용의 증가와 교통환경 악화의 원인이 되고 있으며, 국가적으로는 귀중한 에너지의 낭비, 첨두부하 증가에 따른 전력수요관리의 어려움, 발전용 화석연료 사용증가에 따른 환경오염 유발 등의 문제가 발생하고 있다. 그러나 $8{\sim}12$인치의 원형(또는 사각) PCB 기판에 수백개의 고휘도 LED(반도체 발광 다이오드, Light Emitting Diode)와 구동회로로 구성되는 LED 교통신호등은 발열에 의한 열손실이 거의 없고, 특정 파장대의 단색광을 발광하여 착색렌즈 사용에 따른 빛손실이 없어 80% 이상의 대폭적인 에너지 절약이 가능하며. 또한 긴 수명으로 유지보수비용의 절감 및 교통환경개선 효과가 크게 기대되어 미국, 일본 등 고휘도 LEB 기술 선진국을 중심으로 경쟁적으로 LED 신호등 기술개발에 심혈을 기울이고 있으며, 일부 시범 보급중에 있다. 교통신호등은 특성상 국민의 안전과 직결된 사안으로 엄격한 규격으로 제한하고 있다. 그러나 LED 신호등은 발광 원리 및 발광 방식이 기존의 전구식과 달라 현재 규정된 시험방법으로 직접 평가가 불가능하다. 따라서 우리나라의 경우 LED 제조 기술은 세계적인 수준이나 LED 신호등에 대한 기술개발 및 보급은 현실적으로 어려운 실정이다. 본 논문에서는 에너지절약형 우리나라 환경 특성에 적합한 LED 교통 신호등의 규격 제정 및 국내 보급환경 구축을 위해 LED 신호등에 대한 시제품의 특성을 장시간의 옥외 시험을 통해 평가하고자 한다.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.6
• /
• pp.20-28
• /
• 2013

The purpose of this study was to compare the ultra-violet(UV) radiation under the landscaping shade facilities and tree with natural solar UV of the outdoor space at summer middays. The UVA+B and UVB were recorded every minute from the $20^{th}$ of June to the $26^{th}$ of September 2012 at a height of 1.1m above in the four different shading conditions, with fours same measuring system consisting of two couple of analog UVA+B sensor(220~370nm, Genicom's GUVA-T21GH) and UVB sensor(220~320nm, Genicom's GUVA-T21GH) and data acquisition systems(Comfile Tech.'s Moacon). Four different shading conditions were under an wooden shelter($W4.2m{\times}L4.2m{\times}H2.5m$), a polyester membrane structure ($W4.9m{\times}L4.9m{\times}H2.6m$), a Salix koreensis($H11{\times}B30$), and a brick-paved plot without any shading material. Based on the 648 records of 17 sunny days, the time serial difference of natural solar UVA+B and UVB for midday periods were analysed and compared, and statistical analysis about the difference between the four shading conditions was done based on the 2,052 records of daytime period from 10 A.M. to 4 P.M.. The major findings were as follows; 1. The average UVA+B under the wooden shelter, the membrane and the tree were $39{\mu}W/cm^2$(3.4%), $74{\mu}W/cm^2$(6.4%), $87{\mu}W/cm^2$(7.6%) respectively, while the solar UVA+B was $1.148{\mu}W/cm^2$. Which means those facilities and tree screened at least 93% of solar UV+B. 2. The average UVB under the wooden shelter, the membrane and the tree were $12{\mu}W/cm^2$(5.8%), $26{\mu}W/cm^2$(13%), $17{\mu}W/cm^2$(8.2%) respectively, while the solar UVB was $207{\mu}W/cm^2$. The membrane showed the highest level and the wooden shelter lowest. 3. According to the results of time serial analysis, the difference between the three shaded conditions around noon was very small, but the differences of early morning and late afternoon were apparently big. Which seems caused by the matter of the formal and structural characteristics of the shading facilities and tree, not by the shading materials itself. In summary, the performance of the four landscaping shade facilities and tree were very good at screening the solar UV at outdoor of summer middays, but poor at screening the lateral UV during early morning and late afternoon. Therefore, it can be apparently said that the more delicate design of shading facilities and big tree or forest to block the additional lateral UV, the more effective in conditioning the outdoor space reducing the useless or even harmful radiation for human activities.

• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.79-84
• /
• 2012

Combustion characteristics of outdoor advertisement materials were evaluated for fire risk assessment about fire expanding. At this study, the flame retardancy and the limiting oxygen index (LOI) was measured by UL 94 and ASTM D 2863 respectively. At the result of flame retardancy, foamex was V-0 grade and those of others were out of grade. LOI measurement showed that the LOI of foamex was highest in the samples. The cone calorimeter test was done by ISO 5660-1 to find the combustion characteristics. The cone calorimeter test showed that the outdoor advertisement materials were not good to prevent of fire expanding. The time to ignition (TTI) of flex was the fastest and the peak heat release rate (PHRR) as well as the total heat release (THR) of acrylic panel was higher than those of others.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.27-30
• /
• 2003

옥외 절연물은 환경에 의한 오염과 수분에 의한 젖음 현상이 항상 발생하므로 폴리머 애자의 하우징 재료의 전기방전에 대한 열화내성과 우수한 발수성의 장기간 유지특성은 제품의 장기성능에 있어서 매우 중요한 물성이다. 실리콘 고무는 내열성, 내후성, 산화안정성, 발수성 및 내오염성 동 절연소재로서 우수한 특성을 가지고 있지만 하우징 표변에서의 방전이 발생될 때 옥외절연물에서의 성능은 실리콘 고무의 배합처방에 따라서 많은 차이가 나고 있다. 본 연구에서는 내트래킹 agent인 ATH의 첨가량의 변화에 따른 재료의 특성을 조사하고, 그 특성이 실리콘 고무 폴리머 애자의 특성에 미치는 영향을 조사하였다. ATH의 첨가량에 따라서 내아크성, 내트래킹성 및 표면 발수성을 조사하였고, 폴리머 애자를 내트래킹 휠 시험 및 선행오손 후 섬락전압을 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.92-95
• /
• 2001

고분자 복합체 절연재료는 porcelain 이나 glass 같은 세라믹 소재의 재료와 비교하여 옥외사용 시간의 관점에서 더 뛰어난 특정을 발휘한다. 그러나 노화되었을 때, 이들 옥외용 절연재료의 성질은 발수성이나 흡수성등과 같은 절연재료의 표면특성에 의해 변화한다. 이러한 표면특성의 변화는 누설전류에 의한 트래킹 (tracking), 침식 (erosion) 및 섬락현상(flashover) 등의 유전체 파괴에 이르게 한다. 본 연구에서는 고분자 복합체 절연재료로 널리 이용되고 있는 EPDM의 발수특성을 향상시키기 위해 기존에 이용되던 무기물 첨가제인 alumina hydrate(ATH)이외에 발수성이 뛰어난 실리콘 고무를 상용화제를 이용하여 블렌드하고, 각종 유기 첨가제 및 무기물 보강제를 이용하여 EPDM/Silicone 복합체를 제조하였다. EPDM/Silicone 복합체의 인장강도 및 유전강도는 실리콘의 함량이 증가할수록 낮아졌으며, 촉진 노화시험을 실시한 결과 $120^{\circ}C$까지 인장강도 및 신율을 유지하였다. 유전강도의 측정결과 복합체의 접촉각과 표면에너지 측정결과 Silicone 고무의 함량이 증가할수록 접촉각은 증가하고, 표면에너지는 낮아졌다. 경사평판법에의한 내트래킹성 측정결과 실리콘 함량이 증가할수록 내트래킹성은 우수하였으며, 실리콘 함량이 30%인 복합체에서는 트래킹 및 침식이 진행되지 않았다.