• Applied Chemistry for Engineering
• /
• v.18 no.6
• /
• pp.557-561
• /
• 2007

Polypropylene (PP)/corn starch master batch (starch-MB) blends with different PP compositions of 40, 50, 60, and 80 wt% were prepared by melt compounding at $200^{\circ}C$, using lab scale Brabender mixer. The chemical structures and thermal properties of the PP/starch-MB blends were investigated by FT-IR, differential scanning calorimetry (DSC), and thermogravimetric analyzer (TGA). The chemical structure was confirmed by the existence of hydroxy group. There was no district change in melting temperature and melting enthalpy, and TGA curve indicated a decrease in degradation temperature with starch-MB content. The porosity change of blend was measured by scanning electron microscope (SEM), the degree of porosity on the blend surface increased with the starch-MB content. The rheological properties indicated an increase in complex viscosity, shear thinning tendency and elasticity with the starch-MB concentration. These effects were confirmed by an oscillatory viscometer at $200^{\circ}C$. From these results, it is found that 40 wt% is the optimum starch-MB concentration. The fiber was fabricated from PP60/MB40 with 40 wt% starch-MB and the porosity and tensile properties were investigated.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.383-386
• /
• 1997

Maize starches with different amylose content were repeated autoclaving-cooling cycles up to 4 times, and the yield of resistant starch (RS) from autoclaved maize starches was investigated by enzymatic-gravimetric method and ${\alpha}-amylase$ treatment. With increasing amylose content in starch and the number of autoclaving-cooling cycles, RS yield was also increased, regardless of isolation method. Enzymatic-gravimetric method severely hydrolyzed amorphous region of autoclaved maize starches. Crystalline region was obtained more effectively by enzymatic-gravimetric method than by ${\alpha}-amylase$ treatment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.3
• /
• pp.339-346
• /
• 2008

The contents of starch, moisture, crude protein, crude fat, crude fiber, and ash of different varieties of various crops such as brown rice, barley, corn, sweet potato were analyzed. The average starch contents of brown rice, barley, corn, and sweet potato were $70.1{\pm}0.4\;{\sim}\;72.2{\pm}2.1$, $68.7{\pm}0.2\;{\sim}\;71.4{\pm}1.2$, $67.6{\pm}0.8\;{\sim}\;69.4{\pm}1.8$, and $21.7{\pm}0.9\;{\sim}\;28.3{\pm}0.5%$, respectively. The ground powder of each starchy substrate was suspended in distilled water, and then liquefied, saccharified, and fermented by dried active yeast at 32 for 4 days. By statistical analysis, the effectiveness of the contents of the different components such as starch, moisture, crude protein, crude fat, crude fiber, and ash of the crops on the ethanol production were examined. The results showed that the starch content positively affected the ethanol production in all the tested cereals and sweet potato. In brown rice, ash content affected negatively the ethanol production. In barley, protein content affected negatively the ethanol production, while fiber content affected positively the ethanol production. The sweet potato containing higher content of moisture produced less amount of ethanol.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.88-88
• /
• 2001

최근 들어 초지기의 고속화, 원료의 저급화, 가공작업의 온라인화에 따라 초지기 상에서 안 정된 조업성이 더욱 중요하게 부각되고 있다. 이러한 초지 시스랩의 변화에 따라 사이징 효과의 발현 속도에 대한 관심이 고조되고 있다. 중성 사이징 시스템으로 ASA를 적용할 경우에는 초지기상에서 사이즈도의 대부분이 발현되기 때문에 온라인 후가공 작업의 안정성이 향상되며 사이즈프레스에서 조업성 역시 개선될 수 있을 것으로 기대된다. 본 연구에서는 가격이 저렴하고 국내 수급이 용이한 옥수수 양성전분을 ASA 유화안정제로 이용하기 위해서 OSA (Octenyl Succinic Anhydride)를 이용한 에스테르화 및 산가수분해를 통하 여 ASA 에멀션의 안정성 및 사이징 효과를 개선시킨 전분을 개발하고 그 효과를 규명하고자 하였 다. 이를 위해 전분을 FT-IR을 이용하여 분석하고 호액의 pH, 전기전도도, 전하밀도, 점도 변화 등 을 측정하였을 뿐 아니라 ASA 유화액의 pH, 전기전도도, 시간에 따른 가수분해 안정성 등을 평가 하였다. 또한 ASA 에멀션의 입도 변화 섬유에 대한 흡착특성과 수초지의 사이즈도를 평가하였다. 그 결과는 다음과 같았다. 첫째,OSA 전분의 사용에 따라 전분 호화액의 pH와 전기전도도의 변화는 나타나지 않았 다. 전하밀도는 첨가량이 증가할수록 감소하였으며 호화액의 점도는 상숭하였다. 또 OSA 전분의 적 용이 수초지의 사이즈도에는 영향을 주지 않았다. 그러나 OSA 전분을 사용하여 제조된 ASA 유화 액의 가수분해 안정성은 향상되었다. 이것은 콜로이드 상의 ASA 입자를 캡슐화 하는데 있어 소수성 을 띠고 있는 OSA 전분이 보다 강하고 안정하게 흡착하기 때문인 것으로 판단되었다. 둘째, 전분의 호화 시 H2S04을 사용하여 전분의 산 가수분해를 유도할 수 있었다. 이를 통 하여 전분 호화액의 pH는 낮아지고 전기전도도는 증가하였으나 전하밀도의 변화는 없었다. 또한 겔 화 온도가 낮아지고 저온에서의 점도가 상승하는 변화를 나타냈다. IN-H2S04를 2.3%까지 첨가하였 을 때 ASA 에멀션의 입도가 더욱 감소하였고 섬유에 대한 흡착량이 증가하였으며 수초지의 사이즈 도가 향상되었다. 특히 기존에 사용되어 오던 감자 양성전분에 비해 최대 90%까지 사이즈도의 향상 이 있었다.

• Korean Journal of Food Science and Technology
• /
• v.20 no.4
• /
• pp.618-624
• /
• 1988

This study was conducted to observe the effects of partial replacement of mungbean starch(MB) with dent(DT) or cross-linked(CL) corn starches, and of added hydrocolloids on the characteristics of mungbean starch and the mook. The replacement with CL caused less changes compared to that with DT in phase transition enthalpy of MB measured with defferential scanning calorimeter. The viscosity of MB paste cooled to $50^{\circ}C$ after heating was also affected less with CL than with DT. The addition of hydrocolloids to mixed starches of MB and CL did not affect initial viscosity increase but resulted in marked increase in viscosity at later stage of heating. Mixed monks with CL were more similar to MB monks than those with DT. Hydrocolloids added to MB-CL mixture further decreased the gap between monks with and without CL.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.514-520
• /
• 1996

The purpose of this study was to develop the production technology of modified starch. Corn starches were gamma irradiated at 0-110 kGy and the effect of irradiation dose levels on the physicochemical properties of corn starches were investigated. Blue value linearly decreased, while alkali number and solubility markedly increased as irradiation dose levels were increased. The optical transmittance increased as applied irradiation dose levels were increased in the temperature range of $65-95^{\circ}C.$ Water binding capacity and swelling power showed maximum value at 30 and 10 kGy, respectively and they tended to decrease thereafter. Gelatinization viscosity of the gamma irradiated starch considerably decreased as compared to that of the non-irradiated starch. Irradiation at 110kGy resulted in a marked reduction of peak viscosity and cooling viscosity at $30^{\circ}C$ by 100 and 300 times, respectively. The physicochemical properties of corn starch irradiated at 30 kGy were similar to those of commercial acid-modified starch, while those of corn starch irradiated at 100 kGy were similar to those if oxidized starch.

• Korean Journal of Food Science and Technology
• /
• v.30 no.5
• /
• pp.1128-1133
• /
• 1998

Extrusion cooking treatment was compared with autoclaving/cooling treatment for formation of enzyme resistant starch of high amylose corn starch (HACS). Effects of barrel temperature $(100^{\circ}C,\;120^{\circ}C,\;140^{\circ}C)$ and feed moisture content (25%, 35%, 45%) on extrusion processing in a co-rotating twin-screw extruder under fixed screw speed (100 rpm) were investigated by measuring enzyme resistant starch (RS) yield. RS yield were estimated by in-vitro pancreatin digestion method and enzymatic-gravimetric method using termamyl. Barrel temperature and yield of RS were negatively correlated and feed moisture content and yield of RS was positively correlated as determined by in-vitro pancreatin method. The highest yield (38.4%) of RS was obtained from HACS extrudate processed at the barrel temperature of $100^{\circ}C$ and the feed moisture content of 45%, while the yield of RS by 5 times of autoclaving/cooling was 25%. The yield of RS by in vitro pancreatin digestion method was 20.7% with high amylose corn starch and 8.2% with ordinary corn starch (CS), respectively, under the same extrusion condition (barrel temperature $120^{\circ}C$, feed moisture content 35%). At the same condition, the yields of RS by enzyme-gravimetric method were 14.6% with HACS and 6.8% with CS, respectively. The yield of RS increased during the storage at $4^{\circ}C$ for 4 weeks and the highest yield (60%) was obtained by the storage of HACS extrudates extruded at $100^{\circ}C$ and 45% feed moisture content.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.207-213
• /
• 1996

Effects of replacement of corn starch with Amylomaize Vll starch and addition of enzyme-resistant starch on texture characteristics of com bread (CON) were investigated. Amylomaize-substituted corn bread (AMZ) was made by replacing corn starch with Amylomaize Vll starch. 15% (RSl5) and 30％ (RS30) of butter, was replaced with enzyme-resistant starch (RS) from Amylomaife Vll starch, respectively. Textu,e describing terms were classified according to their physical properties. Result of sensory evaluation characteristics showed that the size of air cells increased as butter replacement level decreased and that hardness increased but springiness decreased as com starch was replaced with Amylomaize Vll starch. The results of Texture Profile Analysis with deformation of 30% and 50% showed that hardness inclosed but cohesiveness decreased as cooling time increased.

• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.353-358
• /
• 1995

The influence of dry-heat treatment($130{\sim}220^{\circ}C$) on the gelatinization and rheological properties of corn starch(11.4% moisture) was examined. The enthalpy of gelatinization measured by differential scanning calorimetry decreased above $190^{\circ}C$. The viscosity of starch by alkali gelatinization increased as the heating temperature rised. All the values including peak viscosity on amylograms and shear stress, apparent viscosity, consistency index and yield stress of thermal-gelatinized starch dispersion showed decreasing tendencies with increasing of heating temperature from above $170^{\circ}C$ compared with those of raw starch. The apparent viscosity and yield stress of all the samples thermal-gelatinized at $90^{\circ}C$ were increased considerably with process of gelatinization time and especially their rapid increase at the early stage was observed in the $190^{\circ}C$ sample. But all the rheological parameters of $220^{\circ}C$ sample recorded very low values compared with those of the others.

• Korean Journal of Food Science and Technology
• /
• v.23 no.5
• /
• pp.642-645
• /
• 1991

The rheological properties of wheat flours and corn starch and cooking properties of dry noodle in the presence of calcium phosphate hydroxyapatite(Ca-P) were studied. The additive($0.2{\sim}0.8%$) had essentially no effects on farinograms of strong and all-purpose wheat flours, however, they decreased the amylograph pasting temperature and increased the peak viscosity of flours, which was more pronounced in all-purpose flour. The cooking properties of dry noodles in the presence or absence of the Ca-P showed no significant differences, but the cutting forces of cooked noodles were increased by Ca-P at 0.4%. The pasting properties of corn starch in the presence of Ca-P($0.2{\sim}0.8%$) were similar to those of wheat flour. The gelatinization temperature of corn starch by differential scanning calorimeter decreased by $1^{\circ}C$ in the presence of 0.4% Ca-P. The time constant, a reciprocal of rate constant, of corn starch gel was slightly increased in the presence of 0.2 or 0.4% Ca-P.