• Title/Summary/Keyword: 오프셋 각도

Search Result 70, Processing Time 0.023 seconds

Reducing the Peak-to-Average Power Ratio of MC-CDMA System Using Phase Offset (MC-CDMA 시스테메에서 위상 오프셋을 이용한 최대전력 대 평균전력 비의 감소 방안)

  • 김성필;김명진이재혁
    • Proceedings of the IEEK Conference
    • /
    • 1998.10a
    • /
    • pp.63-66
    • /
    • 1998
  • MC-CDMA(Multi-Carrier Code Division Multiple Access) 시스템에서 전송 신호의 피크 전력 대 평균 전력(Peak-to-Average Power: PAP)율을 낮추는 방안을 제시한다. 확산 코드에 의해 결정된 각 부 캐리어의 위상 오프셋은 전송 신호의 복소 포락선 형성에 영향을 주게 되어 전송 신호의 PAP 율을 결정하게 된다. 따라서 각 부 캐리어의 위상 오프셋을 적절히 조정함으로써 PAP율을 낮출수 있다. 본 논문에서는 PAP 율을 감소시키는 부 캐리어 위상 오프셋 코드의 한 예를 제시하며, 모의 실험을 통하여 전송신호의 크기 분포 특성과 PAP 율의 감소를 확인한다.

  • PDF

기획 1: 오프셋인쇄기의 현황과 전망 - 고품질과 안정성으로 무장한 오프셋인쇄기 -디지털인쇄기와 차별화로 전통적 아성 수성 출판은 줄고 패키지시장 확대 전망

  • 대한인쇄문화협회
    • 프린팅코리아
    • /
    • v.10 no.6
    • /
    • pp.74-87
    • /
    • 2011
  • 최근 수년간 인쇄산업에서 주목을 받아온 '디지털 인쇄'는 서적이나 카탈로그 등 출판 뿐 아니라 제품의 포장지나 라벨, 간판, 매뉴얼 등 새로운 영역으로 확대되고 있다. 이제 디지털인쇄와 오프셋인쇄를 나누는 것은 무의미해지고 있다. 또한 디지털 인쇄는 오프셋 인쇄를 교체하는 것이 아니라 공존, 공영한다는 개념으로 생각해야 한다. 이에 따라 본지에서는 디지털인쇄기와 오프셋인쇄기에 대한 전반적인 사항에 대해 알아본다. 이번호에는 오프셋인쇄기에 대한 전반적인 사항과 각 업체별 공급하는 인쇄기에 대해 알아본다.

  • PDF

기획 1: 디지털인쇄기 vs 오프셋인쇄기(1) -뜨거워지는 디지털인쇄 시장 가격경쟁 아닌 콘텐츠로 승부 걸어야

  • 대한인쇄문화협회
    • 프린팅코리아
    • /
    • v.10 no.5
    • /
    • pp.58-67
    • /
    • 2011
  • 최근 수년간 인쇄산업에서 주목을 받아온 '디지털 인쇄'는 서적이나 카탈로그 등 출판뿐 아니라 제품의 포장지나 라벨, 간판, 매뉴얼 등 새로운 영역으로 확대되고 있다. 이제 디지털인쇄와 오프셋인쇄를 나누는 것은 무의미해지고 있다. 또한 디지털 인쇄는 오프셋 인쇄를 교체하는 것이 아니라 공존, 공영 한다는 개념으로 생각해야 한다. 이에 따라 본지에서는 디지털인쇄기와 오프셋인쇄기에 대한 전반적인 사항에 대해 알아본다. 우선 5월호에는 디지털인쇄기에 대한 전반적인 사항과 각 업체별 공급하는 인쇄기에 대해 알아본다.

  • PDF

Sidelobe Distortion Analysis of Offset Parabolic Antenna by Scatterer (산란체에 의한 오프셋 파라볼라 안테나 부엽 왜곡 분석)

  • Kim, Seungho
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.18 no.3
    • /
    • pp.43-48
    • /
    • 2018
  • Offset parabolic antenna have been widely used for satellite communication system. To locate feedhorn on antenna system, it requires arbitrary structure which forces to fix on system. However, arbitrary scatterer increases sidelobe level of elevation axis. To solve this problem, we need to predict which angle level is increased by arbitrary scatterer simply. Because conventional simulation method takes a long time to simulate parabolic antenna system and needs exclusive software. In this paper we can calculate sidelobe angle simply by using raytracing method, check coincidence between calculated and simulated result and show how arbitrary scatterer affects sidelobe lavel of elevation axis of offset parabolic antenna depending on angle and location of arbitrary structure.

Joint Estimation Schemes of Carrier and Sampling Frequency Offsets for MB-OFDM UWB Systems (MB-OFDM UWB 시스템을 위한 반송파 및 샘플링 주파수 오프셋 결합 추정 기법)

  • Cho, Chang-Hoon;Yang, Suck-Chel;Shin, Yo-An
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.10C
    • /
    • pp.965-975
    • /
    • 2005
  • In this paper, we propose and evaluate joint carrier and sampling frequency offset estimation schemes based on the channel estimation sequences in PLCP (Physical Layer Convergence Procedure) preamble for the proper and effcient synchronization of the MB-OFDM WB (Multi-Band Orthogonal Frequency Division Multiplexing Ultra Wide Band) systems which have recently drawn explosive attention for future W-PAN (Wireless Personal Area Network) applications. In the joint estimation schemes, we first estimate the sampling frequency offset, and then estimate the carrier frequency offset using the estimated sampling frequency offset. Moreover, to improve the reliability of the estimated offset values, each process uses a combination scheme based on weighting factors. Simulation results using IEEE 802.15 Task Group 3a UWB channel models reveal that the estimation scheme using the simple weighting factors based on easily-measurable received signal power of each sub-channel shows favorably comparable performance to the ideal scheme using the weighting factors based on the perfectly-estimated frequency response of the channel.

Complexity Reduction of HEVC SAO Intra Modes By Adjustment of Offset Values (HEVC SAO 인트라 모드 오프셋 값 조정을 통한 복잡도 감소)

  • Mun, Ji-Hun;Choi, Jung-Ah;Ho, Yo-Sung
    • Journal of Broadcast Engineering
    • /
    • v.19 no.3
    • /
    • pp.355-361
    • /
    • 2014
  • In this paper, we propose a complexity reduction method of sample adaptive offset (SAO), which is an in-loop filter in high-efficiency video coding (HEVC). In the conventional SAO, an offset value is calculated for each coding tree block (CTB) to minimize the error between the original and reconstructed images. In order to determine the optimal offset value, all offset candidates are examined and the offset value that leads to the smallest rate-distortion cost is chosen. Thus, SAO occupies a significant amount of the computational complexity in the HEVC encoder. In the proposed method, we determine the least-used band (LUB) by considering the statistical characteristics of offset values and without processing the offset value included in the LUB. Also, in the offset value decision stage, we check only a certain number of candidates rather than all of them. Experimental results show that the proposed method reduces the encoding time by approximately 8.15% without yielding a significant loss in terms of coding efficiency.

Improve the speed by offset control in HEVC SAO intra mode (HEVC SAO 화면내 모드에서 오프셋 값을 조정한 속도 개선 방법)

  • Mun, Ji-Hun;Choi, Jung-Ah;Ho, Yo-Sung
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 2013.11a
    • /
    • pp.67-70
    • /
    • 2013
  • 본 논문에서는 HEVC(high efficiency video coding)의 후처리 필터 중 하나인 적응적 샘플 오프셋(sample adaptive offset, SAO) 기술을 고속화 하는 방법을 제안한다. 기존의 SAO 는 원 영상과 복원된 영상간의 오차를 최소화하기 위해 각 블록마다 오프셋 값을 계산하므로 연산 복잡도가 매우 높다. 따라서 제안한 방법에서는 다양한 입력 영상에 대한 오프셋 사용빈도를 알아보고, 그 통계를 기반으로 불필요한 오프셋 연산을 생략한다.

  • PDF

Precision Improvement of Indoor Wireless Positioning by Considering Clock Offsets and Wireless Synchronization (클럭 오프셋과 무선동기를 고려한 실내 무선측위 정밀도 향상 기법)

  • Lim, Erang;Kang, Jimyung;Lee, Soonwoo;Park, Youngjin;Lee, Woncheol;Shin, Yoan
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.37C no.10
    • /
    • pp.894-900
    • /
    • 2012
  • Indoor wireless positioning system uses ranging information of beacons in order to precisely estimate a tag location. To estimate distance between each beacons and tag, the system calculates arrival time of a tag pulse with clock of each beacon including independent clock offset. This clock offset seriously affects the performance of ranging and positioning. We propose in this paper a clock offset compensation method to solve this problem. To verify the performance of the proposed method, we simulated location estimation with random clock offset between -1,000ppm and 1,000ppm, and the result shows that the proposed scheme effectively solves the clock offset problem.

The Design and Evaluation of BACF/DCF for Mobile OIS Gyro Sensor's Zero Point angle Following (모바일 OIS(Optical Image Stabilization) 자이로 센서의 영점 각도 추종을 위한 BACF/DCF 설계 및 평가)

  • Lee, Seung-Kwon;Kong, Jin-Heung
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.49 no.8
    • /
    • pp.16-21
    • /
    • 2012
  • The gyro sensor that made by MEMS process is generated an accumulated error(drift) and escape the zero angle following during calculation of rotate angle. This study propose BACF(Boot Angle Compensation Filter) algorithm for prevent escape zero angle and DCF algorithm for remove accumulated error. DCF algorithm is designed for acquire accurate turn of ratio by remove offset and noise components. BACF algorithm is obtained average offset that removed noise components by recursively calculate. Experimental environment, two-axis gyro sensor and mobile OIS camera mounted control board and 5Hz oscillation of ${\pm}0.5^{\circ}$ for the experiments were carried out. BACF and DCF algorithm is applied and the resulting accumulated error did not occur and exactly zero angle following results were made.

Error Detection of Phase Offsets for Binary Sequences (이원부호의 위상오프셋 오류 검출)

  • Song, Young-Joon;Han, Young-Yearl
    • Journal of the Korean Institute of Telematics and Electronics S
    • /
    • v.36S no.9
    • /
    • pp.27-35
    • /
    • 1999
  • In this paper, we propose an error detection scheme of phase offsets for binary sequences including PN (Pseudo Noise) sequences based on the number theoretical approach. It is important to know phase offsets of spreading sequences in the CDMA (Code Division Multiple Access) mobile communication systems because phase offsets of the same spreading sequence are used to achieve the acquisition and are used to distinguish each base station. When the period of the sequence is not very long, the relative phase offset between the sequence and its shifted replica can be found by comparing them, but as the period of the sequence increases it becomes difficult to find the phase offset. The error detection failure probability of the proposed method is derived, and it is confirmed by the simulation results. We also discuss the circuit realization of the proposed method and show it can be easily implemented.

  • PDF