• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1086-1092
• /
• 2012

It has been studied for DGPS/INS(Differential Global Positioning System/Inertial Navigation System) to offer the more precise and reliable navigation data with the aviation industry development. The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system, as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is performed by comparing between the DGPS/INS navigation data and reference trajectory which is more precise than DGPS/INS. The GPS receiver, which is capable of post-processed CDGPS(Carrier-phase DGPS) method, can be used as reference system. Generally, the DGPS/INS is estimated the CG(Center of Gravity) point of aircraft while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. For this reason, estimated error between DGPS/INS and reference system will include the error due to lever arm. In order to more precise performance evaluation, it is needed to compensate the lever arm. This paper presents procedure and result of flight test which includes lever arm compensation in order to verify reliability and performance of DGPS/INS more precisely.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2819-2830
• /
• 2009

Load bearing structural members in a wide variety of applications accumulate damage over their service life. During experiment much effort and cost is needed for measuring structural safety assessment. The sparseness and errors of measured data have to be considered during the safety estimation of structures. This paper introduces parameter estimation and damage identification algorithm by a system identification using static and dynamic response. The equation error estimator and response error widely used in system identification are based on the minimization of least squared error between measured and calculated responses by a mathematical model of a structure. Since each estimator has a specific form of application in noisy environment and proposes different definitions for these forms. To study the behaviour of the estimators in noisy environment Using Monte Carlo simulation, and a data measured pertubation scheme is adopted to investigate the influence of measurement errors on identification results. The assessment result by static and dynamic response were compared, and the efficiency and applicabilities of the proposed algorithm are demonstrated through simulated static and dynamic responses of a dimensional truss type structures.

• 한국경영정보학회:학술대회논문집
• /
• 2007.11a
• /
• pp.597-602
• /
• 2007

본 연구는 추천시스템에서 협업필터링 알고리즘을 이용하여 특정 상품에 대한 고객의 선호도를 예측함에 있어 고객이 상품에 대해 평가한 선호도 평가치를 고객별로 표준화시켜 예측하여 기존의 예측 정확도를 향상시키는 방법에 대하여 연구하였다. 일반적으로 상품에 대한 고객의 선호도를 평가하기 위하여 절대적 기준의 수치적 척도가 제공되지만 개인에 따라서는 상품에 대한 선호 정도가 절대적 척도에 다르게 반영되어 개인별 선호도에 차이가 발생할 수 있다. 이러한 개인적 특성이 동일한 척도의 평가치로 예측되면 예측 결과의 오차를 크게 할 가능성이 있다. 또한 개인이 평가한 선호도 평가치의 편차가 협업필터링 알고리즘을 통한 선호도 예측 정확도와 밀접한 관계를 가지고 있음을 알 수 있었으며 이러한 문제를 해결하기 위하여 개별 고객이 평가한 선호도 평가치를 표준화시켜 표준화된 선호도 평가치를 이용한 선호도 예측을 실시하였다. 분석결과 표준화된 선호도 평가치를 이용한 예측 결과가 비표준화 선호도 평가치를 이용한 예측 결과보다 예측력이 우수함을 알 수 있었으며 결과에 대한 통계적 분석을 통하여 표준화된 선호도 평가치를 이용한 선호도 예측 방법과 비 표준화 선호도 평가치를 이용한 선호도 예측 방법을 혼합할 경우 선호도 예측 정확도를 더 향상시킬 수 있음을 알 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.677-685
• /
• 2011

In order to enhance public transportation and to maintain information credibility, improvement of accuracy regarding route and positional information of public transport is very significant. There have been a variety of methods using GPS to measure accuracy of location-based services. However, the researches of evaluation regarding kinematic position of linear objects measured by vehicle/kinematic GPS are still insufficient. That's why our paper aims to suggest method of evaluation accuracy on a real-time bus route surveyed by GPS by SBM(Single Buffering Method). To make it come true, we compared the findings on the static and dynamic positioning by using PP(Point Positioning), DGPS and GPS/INS integrated systems and analyzed the accuracy and error effects among them, focusing on Anyang city. Consequently, we can find out that in case of P.P. comparing positioning accuracy between RTK DGPS and GPS/INS, both of them have survey result within a margin of error of 5m. More importantly, we can evaluate positional accuracy of each GPS system based on the work provision of a public survey such as error for P.P.(14.5m, 18.1m), DGPS(16.9m, 18.5m), and GPS/INS(18.4m, 18.5m). We are expecting that proposed method in our paper can be utilized in a wide range of categories such as feasibility testing of GPS field survey and high accuracy of positioning for Bus Information System.

• Spatial Information Research
• /
• v.18 no.5
• /
• pp.37-45
• /
• 2010

AT(Aerial Triangulation) is the essential procedure for creating orthophoto and transforming coordinates on the photographs into the real world coordinates utilizing GCPs (Ground Control Point) which is obtained by field survey and the external orientation factors from GPS/INS as a reference coordinates. In this procedure, all of the GCPs can be collected from field survey using GPS and Total Station, or obtained from digital maps. Collecting GCPs by field survey is accurate than GCPs from digital maps; however, lots of manpower should be put into the collecting procedure, and time and cost as well. On the other hand, in the case of obtaining GCPs from digital maps, it is very difficult to secure the required accuracy because almost things at each stage in the collecting procedure should rely on the subjective judgement of the performer. In this study, the results from three methods have been compared for the accuracy assessment in order to know if the results of each case is within the allowance error: for the perceivable objects such as road boarder, speed bumps, constructions etc., 1) GCPs selection utilizing the unique LiDAR intensity value reflected from such objects, 2) using LiDAR DSM and 3) GCPs from field survey. And also, AT and error analysis have been carried out w ith GCPs obtained by each case.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1536-1540
• /
• 2010

자료기반 수문예측 모형은 서로 자기상관이 다른 자료계열에 대해 예측결과만으로 모형의 성능에 대한 상대비교가 어렵다. 그러나 관측치와 예측치간의 평균 오차만을 기준으로 판단하는 기존의 모형 성능평가 기법은 대부분 이러한 자료기반 예측모형의 특성을 고려하지 못하고 있다. 따라서 본 논문에서는 자료기반 수문 예측모형의 성능을 보다 객관적으로 평가할 수 있는 새로운 모형 성능평가 기법인 상대 상관계수(Relative Correlation Coefficient; RCC) 제시하였다. RCC는 자기상관계수에 대한 관측치와 예측치간의 상관계수의 비로 산정되며, 자기상관정도에 따라 예측성능의 결과가 달라진다. 본 논문에서는 다양한 자기상관을 가지는 선형, 비선형 자료계열에 대해 자료기반 수문모형을 적용하여 기존 모형평가 기법의 한계를 제시하였다. 그리고 기존의 성능평가 기법과 RCC를 비교분석하여 자료기반 수문예측모형의 성능평가에 있어 RCC가 보다 객관적이고 일관성 있는 성능평가가 가능함을 보였다.

• Journal of Korea Water Resources Association
• /
• v.35 no.5
• /
• pp.575-581
• /
• 2002

This study evaluates the variation of estimation error of area-average rainfall due to rainfall seasonality. Both the cases considering and not considering the spatial correlation are compared to derive the characteristics of estimation error. Similar cases with different accumulation time without considering the rainfall seasonality are also investigated. This study was applied to the Geum-river basin with total 28 rain gauge measurements haying more than 30 years of daily rainfall measurements. As results of the study we found that: (1) The absolute estimation error of monthly area-average rainfall show strong seasonality like the total rainfall amount. However, the relative estimation error normalized by its mean was estimated to have similar values about 5 to 8% except January and December. (2) The relative estimation error of annual area-average rainfall estimated was found to have the estimation error about 3% of its annual mean. (3) However, the relative estimation error normalized by the standard deviation remains almost the same for both monthly and annual rainfall amounts, which was estimated about 11% of its standard deviation. (4) Finally, the estimation error without considering the spatial correlation was found to become almost twice the estimation error with considering the spatial correlation.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.127-133
• /
• 2014

Purpose: Low dose of PET/CT is important because of Patient's X-ray exposure. The aim of this study was to evaluate the effectiveness of low-dose PET/ CT image through the CTAC and QAC of patient study and phantom study. Materials and Methods: We used the discovery 710 PET/CT (GE). We used the NEMA IEC body phantom for evaluating the PET data corrected by ultra-low dose CT attenuation correction method and NU2-94 phantom for uniformity. After injection of 70.78 MBq and 22.2 MBq of 18 F-FDG were done to each of phantom, PET/CT scans were obtained. PET data were reconstructed by using of CTAC of which dose was for the diagnosis CT and Q. AC of which was only for attenuation correction. Quantitative analysis was performed by use of horizontal profile and vertical profile. Reference data which were corrected by CTAC were compared to PET data which was corrected by the ultra-low dose. The relative error was assessed. Patients with over weighted and normal weight also underwent a PET/CT scans according to low dose protocol and standard dose protocol. Relative error and signal to noise ratio of SUV were analyzed. Results: In the results of phantom test, phantom PET data were corrected by CTAC and Q.AC and they were compared each other. The relative error of Q.AC profile was been calculated, and it was shown in graph. In patient studies, PET data for overweight patient and normal weight patient were reconstructed by CTAC and Q.AC under routine dose and ultra-low dose. When routine dose was used, the relative error was small. When high dose was used, the result of overweight patient was effectively corrected by Q.AC. Conclusion: In phantom study, CTAC method with 80 kVp and 10 mA was resulted in bead hardening artifact. PET data corrected by ultra- low dose CTAC was not quantified, but those by the same dose were quantified properly. In patients' cases, PET data of over weighted patient could be quantified by Q.AC method. Its relative difference was not significant. Q.AC method was proper attenuation correction method when ultra-low dose was used. As a result, it is expected that Q.AC is a good method in order to reduce patient's exposure dose.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.492-492
• /
• 2017

강수량은 지상에 내린 물의 총량으로 홍수 및 갈수량 산정에 있어서 유출특성을 파악하는데 중요한 자료이다. 부정확한 자료 및 수문분석기법에 의한 수자원량의 추정은 수공구조물의 설계 시과소 또는 과다 설계로 문제를 가져올 수 있으며, 수리 수문분석시스템의 효율적인 운영에 많은 지장을 초래하게 될 수 있다. 특히 강수량자료를 기초로 하는 홍수예보 및 갈수예보 모형들은 그 입력치인 강수량자료의 정확도가 큰 비중을 차지하게 된다. 강수량은 면적 강수량을 대표할 수 있는 위치에서 관측되어야 점 강수량을 면적 강수량으로 환산하는데서 발생하는 오차를 최소화 할 수 있다. 최근 강수 특성은 과거에 비해 시공간적으로 매우 불규칙해졌으며, 특히 짧은 지속시간 동안에 많은 양의 강우가 집중되고 있다. 강수량조사망은 이와 같은 강수 특성 변화를 충분히 반영할 수 있어야 한다. 강수 특성을 반영하여 수문조사, 홍수예보, 강우레이더에 활용하기 위해서는 기존 강수량조사망에 대한 재평가가 선행되어야 하며, 재평가된 결과를 토대로 강수량조사망을 설계하여야 한다. 또한 강수량관측소는 그 자체에 여러가지 오차를 내재하는데, 이는 바람의 영향, 증발, 주변 환경 변화 등 다른 여러 가지 오차들이다. 이러한 오차의 발생을 최소화하기 위해서는 관측시설의 유지관리가 매우 중요하다. 강수량자료의 품질 문제를 최소화하여 강수량자료의 품질을 향상시키기 위해서는 기존 강수량관측소 및 운영현황에 대한 명확한 고찰이 선행되어야 하며, 기존의 강수량조사망에 어떠한 문제점 등이 내포되어 있는지에 대한 객관적인 평가를 통하여 수문조사, 홍수예보, 강우레이더 활용에 적합한 강수량조사망 구축이 필요하다. 본 연구에서는 영산강홍수통제소 관할 유역의 강수량관측소 67개소를 조사 평가하여 수문조사, 물관리, 강우레이더의 활용에 필요한 강수량조사망을 구축하였다. 이에 따라 신설 강수량관측소는 14개소가 필요한 것으로 나타났으며, 이 경우 평균 시강수량의 추정 불확실도가 0.2 이상인 영역은 19.3 %에서 10.6 %로 줄어들며, 연평균 강수량의 추정 불확실도가 0.2 이상인 영역은 9.0 %에서 4.7 %로 줄어드는 것으로 나타났다. 또한 강수량조사망 구축에 필요한 강수량관측소 설치, 위치선정, 배치 등에 관한 기준 및 유지관리에 필요한 사항을 제시하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.3
• /
• pp.849-858
• /
• 2014

The mount of antecedent 5-day rainfall (P5) is usually used to determine the antecedent soil moisture condition for estimating effective rainfall using the NRCS-CN method. In order to re-establish the threshold of P5 considering basin characteristics, this study investigated the sensitivity of the threshold of P5 to effective rainfall by comparing the corresponding observed direct runoff. The overall results indicate that the direct runoff estimated using the re-establihed threshold of P5 has smaller mean error (RMSE of 27.3 mm) than those using the conventional threshold (RMSE of 35.2 mm). In addition, after evaluating the effectiveness of threshold of P5 using the improvement index, the threshold re-established in this study improved the ability to estimate the direct runoff by 30% on average. This study also suggested to employ regression models using topographic indices to re-establish the threshold for ungauged basins. When using the re-established threshold from the regression model, the RMSE decreased ranging from 0.4 mm to 15.1 mm and the efficiency index of Nash and Sutcliffe increased up to 0.33.