• The Journal of the Acoustical Society of Korea
• /
• v.4 no.1
• /
• pp.22-34
• /
• 1985

소나 신호 처리에서, 흔히 발생하는 난반사에 의한 잡음 때문에, 기존에 사용되어지고 있는 앨고 리즘으로 처리하기에는 많은 문제점을 내포하고 있다. 본 연구는 소나 시스템의 신호 처리를 위하여 마 이크로 프로세서를 사용하였으며, 신호처리 방법은 코릴레이숀 접음과 반사음을 식별하고, 거기서 평가 된 것을 기준으로 직접음만의 신호를 재생하여 반사음을 처리하였다. 실험의 결과치와 계산치를 비교한 결과, 무향 수조의 특성에 의한 오차를 제외하고는 거의 오차가 없었으며, 그 오차는 주파수가 낮아짐에 따라 증가하였다. 실험 결과를 토대로 처리 시스템의 소형·단순화가 가능한 것으로 분석되었다.

• The KIPS Transactions:PartB
• /
• v.11B no.2
• /
• pp.141-148
• /
• 2004

The ground positions and elevations information called DEMs(Digital Elevation Models) which are extracted from the stereo aerial photographs and/or satellite images using image matching method have the natural errors caused by variant environments. This study suggests the method to evaluate DEMs using correlation values between the reference and the target DEMs. This would be strongly helpful for experts to correct these errors. To evaluate the whole area of DEMs in the horizontal and vertical errors, the target cell is matched for each reference cell using the correlation values of these two cells. When the target cell is matched for each reference cell, horizontal and vertical error was calculated so as to help experts to recognize a certain area of DEMs which should be corrected and edited. If the correlation value is low and tile difference in height is high, the target cell will be candidated as changed or corrupted cell. When the area is clustered with those candidated cells, that area will be regarded as changed or corrupted area to be corrected and edited. Using this method, the evaluation for all DEM cells is practicable, the horizontal errors as well as vertical errors is calculable and the changed or corrupted area can be detected more efficiently.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.4
• /
• pp.396-402
• /
• 2014

The measurement of air-borne noise in a naval ship is a crucial element. Because the noise in a naval ship interferes with a communication between crews and finally it causes to reduce the combat power. Thus, most of newly built ships have to satisfy the criteria of air-borne noise in the stage of delivery of a naval ship. In order to evaluate success or failure of criteria, uncertainty of the measurement should be considered. This study introduces the test method for the measurement of the air-borne noise in a naval ship and is concerned with the evaluation of uncertainty. The uncertainty results which was from the measurement of air-borne noise in 7 naval ships newly built satisfy the error tolerance(2dB). Therefore, it is need to reduce the error tolerance for the reliable measurement result.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.6
• /
• pp.533-540
• /
• 2021

High-resolution satellite images have high potential to acquire geospatial information over inaccessible areas such as Antarctica. Reference data are often required to increase the positional accuracy of the satellite data but the data are not available in many inland areas in Antarctica. Therefore this paper presents a multi-image RPCs (Rational Polynomial Coefficients) sensor modeling without any ground controls or reference data. Conjugate points between multi-images are extracted and used for the multi-image sensor modeling. The experiment was carried out for Kompsat-3A and showed that the significant accuracy increase was not observed but the approach has potential to suppress the maximum errors, especially the vertical errors.

• Radiation Oncology Journal
• /
• v.27 no.2
• /
• pp.91-102
• /
• 2009

Purpose: To compare the accuracy and efficacy of EDR2 film, a 2D ionization chamber array (MatriXX) and an amorphous silicon electronic portal imaging device (EPID) in the pre-treatment QA of IMRT. Materials and Methods: Fluence patterns, shaped as a wedge with 10 steps (segments) by a multi-leaf collimator (MLC), of reference and test IMRT fields were measured using EDR2 film, the MatriXX, and EPID. Test fields were designed to simulate leaf positioning errors. The absolute dose at a point in each step of the reference fields was measured in a water phantom with an ionization chamber and was compared to the dose obtained with the use of EDR2 film, the MatriXX and EPID. For qualitative analysis, all measured fluence patterns of both reference and test fields were compared with calculated dose maps from a radiation treatment planning system (Pinnacle, Philips, USA) using profiles and $\gamma$ evaluation with 3%/3 mm and 2%/2 mm criteria. By measurement of the time to perform QA, we compared the workload of EDR2 film, the MatriXX and EPID. Results: The percent absolute dose difference between the measured and ionization chamber dose was within 1% for the EPID, 2% for the MatriXX and 3% for EDR2 film. The percentage of pixels with $\gamma$%>1 for the 3%/3 mm and 2%/2 mm criteria was within 2% for use of both EDR2 film and the EPID. However, differences for the use of the MatriXX were seen with a maximum difference as great as 5.94% with the 2%/2 mm criteria. For the test fields, EDR2 film and EPID could detect leaf-positioning errors on the order of -3 mm and -2 mm, respectively. However it was difficult to differentiate leaf-positioning errors with the MatriXX due to its poor resolution. The approximate time to perform QA was 110 minutes for the use of EDR2 film, 80 minutes for the use of the MatriXX and approximately 55 minutes for the use of the EPID. Conclusion: This study has evaluated the accuracy and efficacy of EDR2 film, the MatriXX and EPID in the pre-treatment verification of IMRT. EDR2 film and the EPID showed better performance for accuracy, while the use of the MatriXX significantly reduced measurement and analysis times. We propose practical and useful methods to establish an effective QA system in a clinical environment.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2953-2955
• /
• 2000

본 논문에서는 전문가의 지식이 없는 상황에서 자동적으로 최적의 퍼지 제어기를 설계하는 방법에 대해 연구한다. 먼저 퍼지 제어기의 규칙 설정을 위해 기존의 PID 제어기의 입출력 데이터를 클러스터링한다. 군집된 데이터들로부터 클러스터의 수를 파악하고 이를 바탕으로 퍼지 제어를 위한 규칙의 수를 결정한다. 둘째로 퍼지 제어기의 여러 파라미터들은 유전자 알고리즘을 적용하여 최적화한다. GA를 이용한 최적화 과정에서는 성능평가 기준으로 기준입력에 대한 시스템 응답간의 오차와 오버슈트의 크기를 사용하여 응답이 빠르고 안정적인 제어기를 설계하도록 진화방향을 설정한다. 이렇게 만들어진 퍼지 제어기의 성능을 기존의 PID 제어기와 비교 평가한다

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.1D
• /
• pp.135-143
• /
• 2009

Integrating the Global Positioning System (GPS) and Inertial Navigation System (INS) sensor technologies using the precise GPS Carrier phase measurements is a methodology that has been widely applied in those application fields requiring accurate and reliable positioning and attitude determination; ranging from 'kinematic geodesy', to mobile mapping and imaging, to precise navigation. However, such integrated system may not fulfil the demanding performance requirements when the baseline length between reference and mobil user GPS receiver is grater than a few tens of kilometers. This is because their positioning/attitude determination is still very dependent on the errors of the GPS observations, so-called "baseline dependent errors". This limitation can be remedied by the integration of GPS and INS sensors, using multiple reference stations. Hence, in order to derive the GPS distance dependent errors, this research proposes measurement processing algorithms for multiple reference stations, such as a reference station ambiguity resolution procedure using linear combination techniques, a error estimation based on Kalman filter and a error interpolation. In addition, all the algorithms are evaluated by processing real observations and results are summarized in this paper.

• Journal of Digital Convergence
• /
• v.18 no.5
• /
• pp.405-410
• /
• 2020

Professionalism, objectivity, and fairness are highly required in the assessment of tasks in national research and development projects. Experts in the technologies should thus focus on the task's plan in the review process. The same scores in the assessment, however, do not mean that the judges don't have the same opinions. Another problem is the possibility that different weights can be applied for evaluation indexes. This study proposed an AHP-based assessment criteria decision system for national research and development tasks to reduce errors in task assessment and selection and improve the professionalism and fairness by objectifying the evaluation criteria of each index. As a result, the assessment criteria were objectified for each index in the projects. In addition, the professionalism and fairness of experts were secured in the process of setting assessment criteria for each index based on the given marks of weights.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.384-384
• /
• 2020

갈수량은 연간 355번째에 해당하는 일유량으로 연중 10일은 유지할 수 있는 유량을 의미한다. 갈수량은 하천유지유량을 결정하고 다목적댐의 이수안전도를 평가하는 기준으로 활용되는 지표로 활용되고 있으나 현재 기준으로는 과거사상에 초점을 맞추어 산정되고 있다. 본 연구에서는 기후변화에 따른 수문사상의 변화로 인한 미래 극한사상에 대비한 평가기준 마련을 위하여 CMIP5의 GCM 자료를 활용한 한강수계의 소양강댐의 실제증발산량을 추정하고, 이를 고려한 갈수량을 전망하고자 한다. 실제증발산의 경우 관측자료가 부재하므로 증발산 보완관계 가설 기반의 간접계산을 통해 추정하였으며, 잠재증발산량은 FAO Penman-Monteith 공식, 습윤증발산량은 Priestley-Taylor공식을 활용하여 산정하였다. 기준기간(1974-2000년) GCM 자료의 보정은 강우 및 증발산에 대하여 정상성 분위사상법을 적용하였으며, 우리나라의 홍수기 특성을 반영하기 위하여 홍수기(6~9월) 및 비홍수기(10~5월)로 구분하였다. 소양강댐 유역에 대한 연단위 원시 GCM의 경우, 연단위 강우와 실제증발산 각각 -20.0%, +17.3%의 오차율을 보였으나, 지역오차보정 후 각각 -1.2%, -0.2%로 개선되었다. 전망기간(2011-2100년)에 대해서는 비정상성 분위사상법을 적용하였으며, 지역오차보정 과정을 거친 강우 및 실제증발산 자료는 장기유출모형의 입력자료로 활용되었다. 실제증발산을 고려한 유출량을 산정하기 위해 IHACRES 모형을 활용하였으며, 갈수량은 모형으로부터 산정된 유출 시계열에 대한 lognormal 분포의 누적확률밀도함수의 3%에 해당하는 값으로 결정하였다. 전망결과는 근미래(Near future, 2011~2040년), 중미래(Midcentury future, 2041~2070년), 먼미래(Distance future, 2071~2100년)로 나누어 제시하였으며, 미래구간별 추세를 반영한 증감율을 제시하였다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.1
• /
• pp.61-69
• /
• 2003

There is various kinds cause that influence to created DEM and orthoimage using stereo satellite images. Specialty, research about effect that GCP number gives to accuracy of DEM, orthoimage and modeling may have to be gone ahead. Therefore, this research increases GCP number by 5 to 30 and created each modeling, DEM and orthoimage using SPOT panchromatic images that resolution is 10m by digital image processing method. Accuracy assessment did by orthoimage using 20 check point. As a result, GCP number between 10∼30 modeling RMSE is 1 pixel low appear. Horizontal·vertical error that use orthoimage looked tendency that decrease GCP number increases, and confirmed by the most economical in GCP number 10∼15. Also, analyze correlation of GCP number and orthoimage position accuracy and presented improvement plan and research task hereafter.