• Journal of Navigation and Port Research
• /
• v.37 no.1
• /
• pp.35-40
• /
• 2013

In the eLoran navigation system, the dominant deterioration factors of navigation accuracy are the TOA measurement errors on user receiver and the GDOP between the receiver and the transmitters. But if the ASF data measured at dLoran reference station are provided for users through the Loran data channel, it will be possible to correct the TOA measurement errors. The position accuracy can be determined by the DOP depending on the geometry of receiver-transmitters, and their optimal placement improves the navigation accuracy. In this study we determined the geometric placement in case of up to six stations, and evaluated the performance of position accuracy for the receiver-transmitter geometry set of eLoran stations. The proposed geometry of eLoran stations can be referred for the construction of eLoran infrastructure meeting the capability of HEA for maritime, and time/frequency users in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.294-301
• /
• 2016

Recently, the solar tracker has been used to improve the efficiency of solar energy. Solar tracking technologies are classified into the sensor-based method, the program-based method, and the hybrid method. Solar trackers using an AC motor and CdS sensor are low in cost, but the precision of the positions is low, owing to the inertia of the motor and the scattering of sunlight. To compensate for the low precision, we implement a CdS sensor module and propose an AC motor control method using error value. To evaluate the performance of the solar tracker, we implemented a solar water heater. From the experimental results, the solar tracker can achieve ${\pm}2mm$ accuracy for sun, can satisfy ${\pm}15mm$ as a limited error value, and provides a 32% performance enhancement in KSB8202 criteria.

• Nuclear Engineering and Technology
• /
• v.20 no.3
• /
• pp.179-188
• /
• 1988

A recently developed spatial differencing scheme, Linear Characteristic (LC) scheme is compared with some traditionally used schemes such as Step Difference (SD), Diamond Difference (DD), and Step Characteristic (SC) scheme by analyzing the truncation error calculated numerically in slab geometry. Those four candidate schemes are applied to one simple source sink problem and two criticality problems (one is calculation of multiplication factor and the other is slab critical half thickness). The calculated results are then examined by some equitable measures of error. It is concluded that the LC scheme is terribly more powerful than any other candidate scheme that has been prevalent up to the present time. Moreover, the LC scheme estimates integral parameter such as multiplication factor and critical half thickness much more efficiently than SD or SC scheme. This is due to the fact that the fortuitous error cancellation, which occurs when the deviations of cell average flux are summed over the whole gamut of spatial meshes, happens much more favorably to the LC scheme.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.288-288
• /
• 2011

최근 들어 관측된 강우-유출 사상으로부터 유출곡선지수(Runoff curve number, CN)를 계산하는 연구가 수행되어왔으며, 이것은 기존 선행토양함수조건(Antecedent Moisture Condition; AMC) 을 이용한 유출곡선지수 적용에 대한 여러 문제점(AMC 기준의 타당성, 초기손실우량과 최대잠재보유수량의 비($I_a$ S=0.20의 적정성))이 부각되면서 선행유출조건을 이용한 유출곡선지수가 제안되었다. 본 연구에서는 선행유출조건(Antecedent Runoff Condition, ARC) 방법을 적용하여 IHP유역인 방림과 상안미 유역의 강우-유출자료로부터 CN을 직접 산정하였다. 먼저 방림과 상안미 유역에서 각각 12개, 10개의 관측된 강우-유출 사상을 통해 초기손실우량과 최대잠재보유수량의 비($I_a$/S)가 기존 가정의 0.20보다 작은 것을 확인하고 수정된 $I_a$/S비를 고려하여 대상 유역에서의 적정 CN을 산정하였다. 실제 강우-유출 사상에서 산정한 각 사상별 CN의 대표값을 찾기 위해 ARC-II의 평균유출조건으로 가정하여 각 사상별 단순평균과 4개의 지속기간(4시간, 3시간, 2시간, 1시간)별로 구분하여 평균한 CN을 구분하였다. 이를 통해 계산된 유효우량과 관측 유효우량과 비교를 실시하였으며 각 사상을 단순 평균한 ARC-II 조건으로 가정하여 계산된 CN의 오차가 가장 작은 것으로 나타났다. 따라서 기존의 선행토양함수조건(Antecedent soil moisture condition, AMC)의 CN으로 산정된 유효우량과 ARC조건으로 산정된 유효우량을 비교한 결과 방림유역에서 는 오차가 ARC 방법의 경우 37.76%, AMC 방법의 경우 51.27%로 평가되었고 상안미 유역에서는 오차가 ARC의 경우 31.97%, AMC 방법의 경우43.08%로 두 유역에서 모두 ARC 방법으로 산정된 CN이 더 적은 오차값을 주었다. 따라서 방림과 상안미 유역에서의 ARC로 산정된 CN값은 유효우량 산정의 정확성을 향상시킬 수 있으리라 판단된다.

• The Korean Journal of Financial Management
• /
• v.22 no.1
• /
• pp.93-118
• /
• 2005

This paper examines credit spreads in Korea corporate market using one of structural models, the mean reverting leverage ratio model (Collin-Dufresne and Goldstein (2001)). Compared to the actual credit spreads, we show that the credit spreads induced by the model are overpredicted. We also investigate the systematic errors that cause the over-pre-diction of credit spreads using the t-test. We show that the systematic errors are affected by the current leverage ratio and asset volatility.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.227-227
• /
• 2021

하천수의 효율적인 관리와 균형적인 물배분을 위해 신뢰도 있는 하천수 사용량 계측자료가 필수적이다. 공업·생활용수는 유량계를 설치하여 취수량에 대한 신뢰도 있는 자료를 홍수통제소에 보고하고 있으나, 농업용수는 유량계 설치 지점이 적고, 수문조작 등의 간접적인 계측방법 허용으로 취수량 자료의 신뢰도가 낮은 실정이다. 본 연구에서는 만경강 상류의 취수보를 대상으로 시험 유역 운영 및 검증을 통해 직접 계측방법의 취수량 산정 정확도를 비교하였다. 적용한 직접 계측방법은 초음파법, 전자파법, 수위-유량관계법으로 산정된 취수량 자료간의 절대오차 비교를 통해 정확도를 평가하였다. 점단위 취수량 자료 비교시, 현장측정값 대비 초음파법 5.86%, 전자파법 7.28%, 수위-유량관계법 11.84%의 오차가 발생하는 것으로 산정되어 초음파법이 가장 높은 정확도를 가지는 것으로 나타났고, 일단위, 월단위 자료 비교시 기준값으로 설정하였다. 일단위 취수량 자료 비교시, 초음파법으로 산정한 일평균 취수량 대비 전자파법 6.62%, 수위-유량관계법 8.62%의 오차가 발생하였다. 월단위 취수량 자료 비교시, 초음파법으로 산정한 월평균 취수량 대비 전자파법 5.81%, 수위-유량관계법 11.03%의 오차가 발생하였다. 산정된 취수량의 정확도는 초음파법, 전자파법, 수위-유량관계법 순이다. 고가의 첨단 계측장비를 적용하여 연속적인 유속 계측을 통해 산정한 취수량이 신뢰도가 높은 것으로 나타났다. 농업용수는 사용시설별 취수량 규모 편차가 크기 때문에, 추후 중요도가 높은 사용시설과 비교적 낮은 시설간의 구분을 통한 직접 계측방법의 최적 선정 후속연구가 필요하다.

• Journal of radiological science and technology
• /
• v.39 no.3
• /
• pp.435-441
• /
• 2016

The importance of radiation dose display of medical X-ray equipment was emphasized, while third edition of IEC(International Electrotechnical Commission) 60601 started to apply. The existing medical X-ray equipment selected a method for attaching the DAP(Dose Area Product) meter when the dose display. However, because the DAP meter was dependent on all of the income, And it did not yet produced in Korea. So, we received the support of Seoul R&BD Program(Grants No. C1152055) to produce DAP meter prototype of the Domestically technology. In this study, the performance of this prototype was evaluated by comparing the German company's product Evaluation item was an electronic capture performance, radiation dose dependence, radiation quality dependence, energy transmittance, repeatability, light transmittance of 6 entries. And IEC 60580 was based on this evaluation. Evaluation results were electronic capture performance intrinsic error 9.5%, radiation dose dependence limits of variation 1%, repeatability coefficient of variation 2%, energy transmittance 91% each assessment was passed. However radiation quality dependence limits of variation 29%, light transmittance 55% was less than acceptance criteria.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.4 s.38
• /
• pp.61-70
• /
• 2006

This paper presents photogrammetric processing to generate digital elevation models using SPOT-5 HRG stereo images and deals with the accuracy potential of HRG (High Resolution Geometry) supermode imagery for DEM generation. After bundle adjustment was preformed for sensor modelling, digital surface models were generated through the procedures of Epipolar image resampling and image matching. The DEM extracted from HRG imagery was compared along several test sections with the the refernce DEM which was obtained from the digital topographic maps of a scale of 1 to 5000. The ratio of the zone with DEM errors less than 5m to the whole zone was 53.8%, and about 2.5m RMSE was showed when assuming that the zones larger than 5m were affected by clouds, water bodies and buildings and excluding those zones from accuracy evaluation. In addition, the three-dimensional bird's eye view model and 3D building model were producted based on the DSM which was extracted from SPOT-5 HRG data.

• Journal of Radiation Protection and Research
• /
• v.29 no.2
• /
• pp.105-115
• /
• 2004

The Monte Carlo simulation requires very much time to obtain a result of acceptable accuracy. Therefore we should know the optimum number of history not to sacrifice time as well as the accuracy. In this study, we have investigated the effects of statistical uncertainties of the photon dose calculation. BEAMnrc and DOSXYZnrc systems were used for the Monte Carlo dose calculation and the case of mediastinum was simulated. The several dose calculation result from various number of histories had been obtained and analyzed using the criteria of isodose curve comparison, dose volume histogram comparison(DVH) and root mean-square differences(RMSD). Statistical uncertainties were observed most evidently in isodose curve comparison and RMSD while DVHs were less sensitive. The acceptable uncertainties $(\bar{{\Delta}D})$ of the Monte Carlo photon dose calculation for the radiation therapy were estimated within total 9% error or 1% error for over than $D_{max}/2$ voxels or voxels at maximum dose.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.173-178
• /
• 2024

This study presents a technique for assessing the dimensional quality of assembly parts in Prefabricated Steel Structures (PSS) using a stereo vision sensor. The stereo vision system captures images and point cloud data of the assembly area, followed by applying image processing algorithms such as fuzzy-based edge detection and Hough transform-based circular bolt hole detection to identify bolt hole locations. The 3D center positions of each bolt hole are determined by correlating 3D real-world position information from depth images with the extracted bolt hole positions. Principal Component Analysis (PCA) is then employed to calculate coordinate axes for precise measurement of distances between bolt holes, even when the sensor and structure orientations differ. Bolt holes are sorted based on their 2D positions, and the distances between sorted bolt holes are calculated to assess the assembly part's dimensional quality. Comparison with actual drawing data confirms measurement accuracy with an absolute error of 1mm and a relative error within 4% based on median criteria.