• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.5
• /
• pp.415-423
• /
• 2002

An experimental study using a psychrometric calorimeter was conducted to investigate the temperature and pressure mea surement errors permitted for determining cooling capacity of an air conditioner. First, the instrument calibration was made in accordance with the related test methods and guidelines in order to accurately evaluate basic performance (cooling capacity and airs flow rate). Secondly, a parametric study was performed to examine the effect of measurement error involved if temperature and pressure measuring instruments on the cooling capacity calculation. From the results, it was found that the degree of accuracy for both temperature and pressure measurements played an important role on the error occurring in the determination of cooling capacity and needed to be maintained within a certain value to guarantee required accuracy of cooling capacity.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.452-456
• /
• 1993

The quantum efficiencies of photomultiplier tubes were measured by counting the coincidence photon pairs generated in the process of spontaneous parametric down-conversion. They were measured within 3% accuracy over the range of wavelength from 560 to 850 nm without any standard light source or detector. The values for 633 nm correspond to those obtained with a calibrated laser power meter within the measurement error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.6
• /
• pp.566-573
• /
• 1991

For the evaluation of the magnetic field strengthmeasured by standard field method with that measured by standard antenna method. The compared results are in good agreement within the error limit. As the Result of this research, the calibration service for magnetic field strenth measurement can be provided whtin the uncertainty of about 1 dB in the frequency range of 10 kHz to 30MHz.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.211-224
• /
• 2014

금속을 포함한 분자에 대한 양자계산은 정확하고 일관된 결과를 얻기가 힘들 뿐만 아니라 상당한 컴퓨터 자원을 소비하며 많은 시간이 소요된다. 본 연구에서는 복잡한 양자계산의 근사를 위한 방법으로 본래 정성적인 구조 예측에 사용되는 닮은 궤도함수분석(Isolobal Analysis)을 정량적인 측면에서 접근해보고, 이를 통해 닮은 궤도(Isolobal) 구조를 가지고 있는 단위들(radical 등)에 대해서 계산을 근사할 수 있는 방법에 대해 논의한다. $CH_3$, $CH_2$와 닮은 궤도 구조를 가진 전형 원소를 중심으로 하는 분자들에 대해 가장 기초적인 근사계산인 Hartree-Fock 양자계산을 수행하였다. $(CUH_5){_2}^{2-}$를 표적으로 결합 구조를 예측하기 위한 경향성을 계산한 결합 성질로부터 파악한다. 분석 결과 동일한 주기에 대해서는 원자반지름(Atomic radii)에 대해 조화 형태의 결합에너지가 얻어졌으며, 동일한 족에 대해서는 좋은 근사가 되지 않았다. 파악된 경향성을 바탕으로 금속의 결합을 근사한 에너지에 대해서는 -1054.1875 kJ/mol로 비교적 큰 오차를 보였으나, 오차 항에 대한 분석이 가능해 추가적인 계들에 대한 계산으로 근사를 교정할 수 있을 것으로 보인다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.154-158
• /
• 2001

산업이 고도화, 대형화됨에 따라 조선, 건설, 기계산업문야에서 대용량 힘 측정의 필요성이 날로 증가하고 있다. 힘 측정에 사용되는 힘 센서는 국가 힘 표준인 힘 표준기로부터 교정을 받아 사용함으로써 힘 측정 결과에 대해 국제적으로 인정받을 수 있다. 본 연구에서는 build-up 힘 표준기에 사용되는 build-up 힘센서를 설계 및 제작하고 힘 센서 각각의 특성과 build-up 시스템 전체의 특성을 실험하여 build-up 힘 센서의 오차를 평가하였다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.373-378
• /
• 1985

본 연구에서는 He-Ne레이저를 광원으로 하는 시준기 교정용 레이저 각도 간섭 계를 설계 제작하였으며 이 장치의 계통적 오차(systematic error)를 분석하였다. 또 간섭계의 반사경으로 사용된 두 코너큐브(corner cube) 중심 사이의 간격측정을 위 한 새로운 방법을 연구하였으며 이 측정의 정확도를 실험적으로 검사하였다.

• Journal of the Korean Vacuum Society
• /
• v.4 no.2
• /
• pp.135-141
• /
• 1995

Spinning Rotor Gauge(SRG)를 전달표준기(transfer standard gauge)로 사용하여 한국표준과학연구원(KRISS)의 고진공표준과 이태리 표준연구소인 IMGC(Istituto 야 Metrologia Gustavo Colonnetti)고진공표준의 국제비교를 실시하였다. 그 방법은 SRG의 accommodation coefficient(s)를 각 연구실의 고진공표준기로 측정하여 그 결과를 비교하였다. 이 결과 두 기관에서 교정한 SRG 볼의 $\sigma$값의 평균차이는 0.696%로서 양국의 고진공표준은 오차범위내에서 일치하는 것으로 나타났다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.860-863
• /
• 1996

In this paper, we formulate the extended Kalman filter for calibration of gimballed inertial navigation system (GINS) at a pure navigation mode with 1500 ft/sec initial velocity and compare its performance to the linear Kalman filter's by using Monte-Carlo analysis method. It has been shown that estimation performance of the extended Kalman filter is better than that of the linear Kalman filter.

• The korean journal of orthodontics
• /
• v.37 no.1 s.120
• /
• pp.16-28
• /
• 2007

Objective: Evaluation of individual growth is important in orthodontics. The aim of this study was to develop a convenient software that can evaluate current growth status and predict further growth. Methods: Stature data of 2 to 20 year-old Koreans (4893 boys and 4987 girls) were extracted from a nationwide data. Age-sex-specific continuous functions describing percentile growth curves were constructed using natural cubic spline function (NCSF). Then, final stature prediction algorithm was developed and its validity was tested using longitudinal series of stature measurements on randomly selected 200 samples. Various accuracy measurements and analyses of errors between observed and predicted stature using NCSF growth curves were performed. Results: NCSF growth curves were shown to be excellent models in describing reference percentile stature growth curie over age. The prediction accuracy compared favorably with previous prediction models, even more accurate. The current prediction models gave more accurate results in girls than boys. Although the prediction accuracy was high, the error pattern of the validation data showed that in most cases, there were a lot of residuals with the same sign, suggestive of autocorrelation among them. Conclusion: More sophisticated growth prediction algorithm is warranted to enhance a more appropriate goodness of model fit for individual growth.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.751-758
• /
• 2015

Mathematical models are actively used to reduce the experimental expenses required to understand physical phenomena. However, they are different from real phenomena because of assumptions or uncertain parameters. In this study, we present a calibration and validation method using a paper helicopter and statistical methods to quantify the uncertainty. The data from the experiment using three nominally identical paper helicopters consist of different groups, and are used to calibrate the drag coefficient, which is an unknown input parameter in both analytical models. We predict the predicted fall time data using probability distributions. We validate the analysis models by comparing the predicted distribution and the experimental data distribution. Moreover, we quantify the uncertainty using the Markov Chain Monte Carlo method. In addition, we compare the manufacturing error and experimental error obtained from the fall-time data using Analysis of Variance. As a result, all of the paper helicopters are treated as one identical model.