• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1171-1176
• /
• 2014

Oil retention experiments were conducted and the performance was characterized for electrochemically etched stainless steels. The 304 stainless steels were electrochemically etched in dilute Aqua Regia to form porous structures. The structures were also hierarchical, which provides very large area for oils to adhere. Also the structures had deep valleys, which act as reservoir and are able to resist against oil-detaching forces. Several commercial oils were dispensed to characterize oil retention properties via rotating disk experiment method. The results showed that the etched surfaces have superior oil retention performance in every conditions. Also the retention enhancement ratio went particularly higher as the environments became more severe. This surface modification technique could be applied to other steel products for pretreatments of various kinds of coatings.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.4
• /
• pp.274-280
• /
• 2021

Intentional replantation has been used for alternative treatment for conventional root canal therapy. This case report describes that the intentional replantation with application of extrusive orhodontic force for 6 weeks, on which tooth of previous root canal therapy. As preapplicatory orthodontic force, tooth moblity was increased so that extraction of the designated tooth was more easily accomplished and augmented volume of periodontal ligament is expected to acceleated gingival reattachment.

• Korean Journal of Clinical Laboratory Science
• /
• v.49 no.3
• /
• pp.256-262
• /
• 2017

Essential oil from herb is known to exert pharmacological effects on the human body. In this study we investigated the antibacterial activity of 4 essential oils (teetree, rosemary, melisa, and lavender), as well as the blended mixture oil of teetree, rosemary, and melisa (TRM) on three bacteria, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. Antibacterial analysis was performed using the standard disk diffusion method, and minimum inhibition concentration was determined by the broth microdilution method with different concentrations of essential oils (0.5, 1, 2 and 3 mg/mL). After incubation at $37^{\circ}C$ for 24 h, the antibacterial activity was assessed by measuring the zone of growth inhibition surrounding the disks. Herb oil with the inhibition zones showed varied values ranging from6 to 25 mm. However, the components of herb oil of TRM are as highly active as the teetree oil against pathogens, generating large inhibition zones for both gram negative and positive bacteria (13~22 mm and 8 mm inhibition zones). In the analysis for MIC, TRM showed growth-inhibitory effects at 0.0625% for S. aureus and E. coli, and 1.25% for P. aeruginosa. This result demonstrated that the anti-microbial activity of TRM was greater than a single herb oil, including oxacillin, rosemary, and teetrea. As a single herb oil, both rosemary and teetrea also had an anti-microbial effect by itself, and we can expect that the blended oil mixture may exert a synergistic effect against multidrug resistant bacteria, suggesting its future application in natural preservative agents for health food and cosmetics.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.1
• /
• pp.41-48
• /
• 2014

To development of the low toxic preservatives, we prepared 29 kinds of chemicals using dinotefuran of low toxic insecticide, IPBC and propiconazol of fungicide, and clove oil has fungicidal activity, but is harmless to humans. It was conducted to investigate the inhibitory effectiveness of mycelial growth and anti-mold effectiveness to treated PDA medium and wood specimen with prepared chemicals. It was not showed anti-mold effectiveness that solvent and emulsifier form preservatives. Therefor, we thought that only four component, dinotefuran, IPBC, propiconazol and clove oil, has anti-mold effectiveness. In the PDA medium test, the preservative which has much IPBC showed high anti-mold effectiveness. By the wood specimen test, it was known that many prepared preservatives which showed good inhibitory effectiveness of mycelial growth in the PDA medium test, have not anti-mold effectiveness. Of all prepared preservatives in this study, only three preservatives containing dinotefuran and IPBC, or adding clove oil appeared the excellent anti-mold effectiveness.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.89-95
• /
• 2024

Nowadays, the competitiveness of a company depends on the ability of all organizational members to share and utilize the organizational knowledge accumulated by the organization. As if to prove this, the world is now focusing on ChetGPT service using generative AI technology based on LLM (Large Language Model). However, it is still difficult to apply the ChetGPT service to work because there are many hallucinogenic problems. To solve this problem, sLLM (Lightweight Large Language Model) technology is being proposed as an alternative. In order to construct sLLM, corporate data is essential. Corporate data is the organization's ERP data and the company's office document knowledge data preserved by the organization. ERP Data can be used by directly connecting to sLLM, but office documents are stored in file format and must be converted to data format to be used by connecting to sLLM. In addition, there are too many technical limitations to utilize office documents stored in file format as organizational knowledge information. This study proposes a method of storing office documents in DB format rather than file format, allowing companies to utilize already accumulated office documents as an organizational knowledge system, and providing office documents in data form to the company's SLLM. We aim to contribute to improving corporate competitiveness by combining AI technology.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.46 no.2
• /
• pp.89-103
• /
• 2020

A frizz hair is referred to the fly-away hairs that have become bulky or deviated from the regular hair and the cause of that is not clear known. The internal lipids are related to the physical properties of hair such as elasticity and tensile strength and interracial studies have previously conducted to relate the lipid mass and Afrikaan hair, which has a lot of frizzy hair. Although washing hair is the only way to control the hair loss without damage of hair surface, the number of washing and lipid loss are not linearly correlated. In this study, the amount of lipid hair was analyzed by washing the hair with a few different types of shampoos containing various conditioning polymers and oils of different polarities. The results confirmed that the higher the polarity of the oil, the higher the lipid content. This method was applied to Indian frizzy hair to evaluate the degree of frizziness and found that the frizzy volume was more severe for a hair with less lipids. On the other hand, the frizzy hair volume of fly-away hairs was observed more broadly for the hairs with higher lipid contents. In addition, the friction on the surface of the hair did not differ due to the oil treatment. Taken together, it was concluded that hair frizzing was affected by the amount of lipids in the hair rather than by the adhesion between the oils. Thus, this study suggests that controlling the lipid contents in hair may be an important solution in the development of hair anti-frizzy technology.

• Korean Journal of Dental Materials
• /
• v.44 no.2
• /
• pp.187-195
• /
• 2017

TheraCal LC, a new light-cured, resin-modified calcium silicate-filled base/liner material, has been introduced as a pulpotomy agent. The aim of this study was to evaluate the capacity of hard tissue formation and pulpal response after pulpotomy with TheraCal LC. Twenty-two 9-week-old male rats were anesthetized, cavities were prepared in maxillary first molars and pulps were capped with formocresol (FC), mineral trioxide aggregate (MTA), and TheraCal LC. Specimens obtained from rats were scanned using a high-resolution micro CT system. The specimens were prepared and evaluated histologically, and immunofluorescence assay was performed to assess the dentin matrix protein-1 (DMP-1) expression. On micro CT analysis, the MTA and TheraCal LC groups showed thicker hard tissue formation than the FC group. On hematoxylin and eosin (H&E) staining, MTA and TheraCal LC groups showed dentine bridge formation with vital pulp beneath the materials. On immunofluorescence analysis, DMP-1 was highly expressed in the TheraCal LC group compared to the FC group. TheraCal LC showed similar capacity to form hard tissue as MTA when it was used as a pulpotomy agent. Because of its good manipulation and faster setting time compared to MTA, TheraCal LC could be considered as a good alternative to MTA.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.1
• /
• pp.48-54
• /
• 2020

In the case of crown-root fracture due to traumatic injury in anterior tooth and the fracture margin is located subgingivally, forced eruption has been proposed for the reconstruction of deficient bone and soft tissue. Forced eruption is one of the easiest orthodontic approaches that can have an acceptable outcome and prognosis, and has a low incidence of relapse. However, using heavy forces or very fast movements can also cause tissue damage or ankylosis. The following case reports present forced eruption as treatment option of crown fracture in maxillary anterior teeth.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.379-386
• /
• 2001

This study was performed to evaluate the sealing ability of various retrograde filling materials by using bacterial penetration and dye penetration test. One hundred and forty extracted human teeth with single, straight canals and mature apiece were collected and used for this study. All canals were instrumented using an engine driven Ni-Ti file (ProFile). After removing 3mm from the apex of tooth, a standardized 3mm root end cavity was prepared using an ultrasonic instrument. The 70 teeth were randomly divided into 7 groups : 6 groups for retrograde filling using Super-EBA, ZOE, Chelon-Silver, IRM, ZPC and amalgam. The 7th group was used as a negative control. Nail varnish was applied to all external root surfaces to the level of the reseated root ends to prevent lateral microleakages. The specimens were then sterilized in an ethylene oxide sterilizer for 24 hours. 2 mm of the reseated root was immersed in a culture chamber containing a Tripticase Soy Broth with a phenol red indicator. The coronal access of each specimen was inoculated every 72 hours with suspension of Proteus vulgaris. The culture media were observed every 24hours for color change indicating bacterial contamination. The specimens were observed for 4weeks. The remaining 70 teeth were submitted to a dye penetration test. The canals of all teeth were first sealed with AH26 and obturated using an Obtura II system. Root resection, root end preparation and retrograde filling was performed as above. All specimens were suspended in 2% methylene blue dye for 72 hours before being ion gitudinally split. The degree of dye penetration was then measured using a stereomicroscope at 10 magnification and evaluated. The results were as floows : 1. In the bacterial penetration, the degree of leakage was the lowest in the Super-EBA, followed by, in ascending order, ZOE, Chelon-Silver IRM and ZPC. The amalgam showed highest bacterial leakage of all(p<0.01). 2. In the dye penetration, the degree of microleakage was the lowest in the Chelon-Silver and Super-EBA, followed by, in ascending order, IRM, ZPC. The ZOE and amalgam showed the highest microleakage of all (p<0.05). These results suggested that the eugenol based cement, Super-EBA, have excellent sealing ability as a retrograde filling material.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.480-494
• /
• 2013

Globally branded culture festival in the region as a key component to the originality and distinction and with local residents and visitors to share experience and has succeeded in branding through Mind. Than mimics festivals in competitive and differentiated cultures containing festivals create a unique festival brand, and through the cultural and economic competitiveness, as well as the phase of the World Festival and preserve local culture and identity. Developing The best areas will be an asset. In order to build this world-class festival brand differentiation strategy above all, must be a top priority, Discrimination discovery and development of the local culture and sensibility in the age of the most powerful marketing tool that is being presented through storytelling brand assets to be passed on to visitors should. Thus the creation of storytelling festivals. Sensitivity of the festival right direction and in an era of paradigm key drivers of the local economy, such as image enhancement, and building long-term regional development and differentiation based on quality of life by creating a local culture can improve will Region's cultural and economic areas, the most important resource for the success of the festival is uniformly short-term planning and configuration, tube-driven operating as a one-sided non-participation. Sharing. Communication with an emphasis on the application of storytelling that is essential is considered.