• Title/Summary/Keyword: 오염물질 유출

Search Result 700, Processing Time 0.032 seconds

Water Quality, Flora and Fauna of 7 Wetlands in Donghae City (동해시 7개 습지의 수질과 동식물상)

  • Han, Gab-Soo;Park, Jung Ho
    • Journal of Wetlands Research
    • /
    • v.16 no.4
    • /
    • pp.335-352
    • /
    • 2014
  • In this study, we investigated and analysed the water quality, distribution of the vegetation and the wildlife to seven wetlands in Donghae city. As a result, most of the wetlands was found to be very poor water quality and some specific pollutants from entering the wetland. A total of 234 taxa on vegetation were identified including 207 species, 24 varieties, 3 formaes, 168 genera and 69 families. 2 species were recorded as designated rare plant of Korea Forest Service. The naturalized plants were 27 species. The urbanization rate of naturalization index was 8.4% and 11.6% respectively. The number of benthic macroinvertebrate taxa was 35 species, 26 families, 12 orders, 5 classes and 3 phylums. Rare species were recorded 3 species. Taxa for fishes were 5 family and 5 species. Endangered wildlife was found 1 species. Most wetlands in Donghae city were the relatively small in size, and some wetlands were separately located from forest and river ecosystems. It was limited inflow and outflow of species into a wetland from the outside. However, various vegetation were found at whole wetlands and some special species also inhabited. The wetlands performed the role as a habitat of wild life.

Study on Phosphorus Removal in the Secondary Effluent by Flotation Using Microbubble Liquid Film System (미세기포 액막화 부상법을 이용한 하수 2차 처리수의 인 제거에 관한 연구)

  • Lee, Shun-Hwa;Kang, Hyun-Woo;Lee, Se-Han;Kwon, Jin-Ha;Jung, Kye-Joo
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.34 no.1
    • /
    • pp.42-48
    • /
    • 2012
  • In this study, experiment on phosphorus removal was performed by using microbubble liquid film flotation tank with microbubble module. After dissolving gas and liquid in dissolving tank, microbubble liquid film system created microbubbles in equal size under fixed low pressure. After being passed through $A_2O$ and m-$O_3$ process, secondary treatment wastewater was used as influent in phosphorus removal process. When the T-P concentration of influent was 2.89 mg/L, alum(8%, 30 mg/L) was injected into a microbubble flotation tank, the treatment resulted 94% of T-P removal rate. Remaining T-P concentration was less than 0.2 mg/L, which is in accord with the effluent quality standard. Seasonal variations in water temperature showed no differences in T-P removal property. When the inflow concentration of SS was 1.0 mg/L or more, it served as coagulation nuclei in the coagulation process. In that condition, average T-P removal rate was higher than 97%. When 50% of floated scum was returned, coagulator Al included in scum assisted the injected coagulator and maximized the coagulation efficiency of pollutant. In such treatment, the T-P concentration was measured as 0.18 mg/L and satisfied the outflow water quality standard, which is 0.2 mg/L or less.

Determination of Hydraulic Parameters in Unconfined Sandy Aquifer in a Laboratory Scale (실내 자유면 사질 대수층의 수리상수 결정)

  • 김정석;김동주
    • Journal of the Korean Society of Groundwater Environment
    • /
    • v.6 no.3
    • /
    • pp.152-157
    • /
    • 1999
  • Oil leaked from underwound storage tanks and leachate from sanitary landfills have been known as contaminant sources of the high-quality groundwater resources. The mobility of contaminants in the aquifer largely depends on the groundwater flow and the determination of associated hydraulic parameters is essential for a proper remediation of contaminated grnundwater. This study aimed at determining an optimum set of hydraulic parameters for an unconfined sandy aquifer of a laboratory scale through comparison of various methods. Results showed that the specific yield obtained from gravity drainage experiment was an average of 0.20 with minor variations in aquifer depths. and the permeabilities obtained from Dupuit approximation and slug test gave similar values of 5.33 cm/min and 5.85 cm/min but the constant head method gave 0.17 cm/min, which is much ion than the other methods. This experimental evidence reveals that the permeability of the unconfined sandy aquifer could be accurately determined by Dupuit assumption or slug tut rather than by constant head method conducted for a disturbed separate soil column.

  • PDF

Engineering Properties of CB Cut-off Walls Mixed with GGBS (고로슬래그 미분말을 혼합한 CB 차수벽의 공학적 특성)

  • Kim, Taeyeon;Lee, Bongjik
    • Journal of the Korean GEO-environmental Society
    • /
    • v.23 no.5
    • /
    • pp.33-39
    • /
    • 2022
  • For a slag-cement-bentonite (slag-CB) cut-off wall, GGBS replaces a part of the cement mixed to build a CB cut-off wall, which is used to block the flow and leakage of pollutants or groundwater; prevent seawater infiltration; and repair or reinforcement an aged embankments. Slag-CB cut-off walls are used in various applications in different fields where groundwater control is required due to its excellent characteristics. Such properties include high strength, low permeability, high durability and chemical resistance. However, despite these advantages, slag-CB cut-off walls are not extensively studied in Korea and thus are not applied in many cases. Particularly, GGBS, which replaces cement in a mixture, has different properties depending on its country of production. Consequently, it is necessary to perform various studies on slag-CB cut-off walls that use GGBS produced in Korea in order to increase its usability. This study has evaluated the bleeding rate, setting time, strength, and permeability in relation to the cement replacement rate of GGBS produced in Korea for slag-CB cut-off walls, with the aim to increase its usability. The evaluation found that slag-CB cut-off walls, made of a mixture containing GGBS produced in Korea, have a lower bleeding rate and permeability, and higher strengththan CB cut-off walls. It was also analyzed that such improved performance is more effective with a higher cement replacement rate of GGBS.

Estimating the Global Inflow and Stock of Plastic Marine Debris Using Material Flow Analysis: a Preliminary Approach (물질흐름분석을 활용한 전세계 플라스틱 해양쓰레기의 유입량과 현존량 추정: 예비적 접근)

  • Jang, Yong Chang;Lee, Jongmyoung;Hong, Sunwook;Choi, Hyun Woo;Shim, Won Joon;Hong, Su Yeon
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.18 no.4
    • /
    • pp.263-273
    • /
    • 2015
  • We estimated the global inflow and stock of plastic marine debris. In South Korea, we estimated that the annual inflow of plastic marine debris (72,956 tons) was about 1.4% of annual plastics consumption (5.2 million tons) in 2012. By applying this 1.4% ratio to global plastics production from 1950 to 2013, we estimated that 4.2 million tons of plastic debris entered the ocean in 2013 and that there is a stock of 86 million tons of plastic marine debris as of the end of 2013, assuming zero outflow. In addition, with a logistic model, if 4% of petroleum is turned into plastics, the final stock of plastic marine debris shall be 199 million tons at the end. As the inflow and the stock are different units of measurement, better indicators to assess the effectiveness of inflow-reducing policies are needed. And, as the pollution from plastic marine debris is almost irreversible, countermeasures to prevent it should be valued more, and stronger preventive measures should be taken under the precautionary principle. As this is a preliminary study based on limited information, further research is needed to clarify the tendency of inflow and stock of plastic marine debris.

호박분말을 첨가한 라면의 저장 안정성에 대한 연구

  • Byeon, Jang-Won;Park, Jin-Gwan;Lee, Chi-Ho
    • Proceedings of the Korean Society for Food Science of Animal Resources Conference
    • /
    • 2006.05a
    • /
    • pp.337-342
    • /
    • 2006
  • 호박 분말을 첨가한 라면의 $\beta$-carotene의 함량 정량 결과 호박분말을 첨가할수록 $\beta$-carotene의 함량은 증가하였다. 총균수 검사에서는 제조 후 44일까지는 균이 검출되지 않았으며 58일째부터 호박 분말의 첨가량이 증가함에 따라서 그 총균수의 검출이 증가함을 알 수 있으며 이는 공기 중의 미생물의 오염과 상온 상태의 호박에 함유되어 있는 여러 종류의 영양성분 등에 의하여 균이 성장할 수 있는 최대의 생육 조건에 의한 것으로 판단된다. 관능 검사에서 가장 선호도가 좋았던 호박 분말을 2.5% 첨가한 라면은 과산화물가가 기준치에 도달하는 기간을 120일(약 4개월)로 추측할 수 있었다. TBA value의 실험에서는 2.5% 호박 분말이 첨가된 라면의 산패는 대조군과 큰 차이를 보이지 않으므로 이것을 줄이기 위해 완전한 밀봉 포장이 이루어진다면 산패의 속도를 줄일 수 있을 것으로 사료된다. 호박을 첨가한 라면의 저장 안정성에 대한 연구 결과 호박을 첨가하면 할수록 라면의 저장성이 떨어진다고 결론을 내릴 수 있다. 그러한 원인으로는 호박에 함유되어 있는 여러 종류의 영양성분과 라면과의 결합시 호박에 함유된 $\beta$-carotene 이외의 다른 물질들에 의해서 저장성 및 안정성에 영향을 미친 것으로 판단된다. 또한 보관 시의 문제점으로써 포장상태를 들 수 있는데 포장상태가 완전한 밀봉상태가 아닌 비닐팩을 이용하였다는 것이다. 이는 호박 라면의 공기와의 접촉을 촉진한 계기가 되었으며 그로 인하여 여러 가지 미생물들의 활성이 활발히 이루어졌으며 또한 지질의 산패를 가속화시킨 결과라고 생각된다. 따라서 호박 라면 제조시 이러한 공기와의 접촉을 차단시킬 수 있는 포장재료를 선택해야 될 것으로 사료된다.0.05), 맛, 연도, 다즙성 및 전체적인 기호성은 유의한 차이가 없었다.자체를 악하다고 볼 수 없고 더구나 구원을 이 세상에서의 이탈로 볼 수 없다. 진정한 구원이란 원래 하나님이 보시기에 아름다웠던 그 세상으로의 회복을 포함한다. 이런 면에서 하나님 주권 신앙 하에서 구원이란 전 인격적인 구원, 전 우주적인 구원이 된다. 그렇기 때문에 성도는 세상의 삶과 학문, 예술, 정치, 경제, 사회를 포함한 모든 분야를 하나님의 뜻 가운데서 그 원래의 목적에 부합할 수 있도록 회복시키는 일에 적극 참여해야 한다.자체가 이를 주도하기는 사실 어려움이 있다. 그리고 대형유통점이 영업행위를 영업시간제한에서부터 출점제한에 이르기까지 규제하는 건은 심사숙고하여야 한다. 대형유통점이 국가경제 및 지역사회에 미치는 영향이 부정적인가 긍정적인가에 대해 국내외 학계와 업계에서 여전히 많은 논란이 있기 때문이다. 정부와 지자체에 의한 시장개입은 반드시 필요한 경우에 한해 합당한 방법에 의해 이루어져야 한다. 대형유통점에 대한 규제는 지역사회에 미치는 영향을 다면적으로 평가한 결과에 근거하여 이루어져야 할 것이다. 대부분의 지자체는 체계적인 평가시스템과 객관적인 통계 자료를 갖고 있지 못한 실정이다. 향후 가장 시급한 과제는 시장개방 이후 지난 10년간 대형유통점이 지역사회에 미친 영향에 관한 광범위한 통계자료를 수집하고 이를 체계적으로 분석하여 정책방향을 올바르게 설정하는 것이라 할 수 있다.i와 K. pneumoniae가 존재하며 확산 중임을 시사한다. 앞으로 CTX-M형 ESBL의 만연과 변종 CTX-M형 ESBL의 출연을 감시하기 위한 정기적인 연구와 조사가 필요한 것으로 생각한다., A2-1, B1-1, B2-1의 경우, 강우 일수 감소 이전과 연 유출량 변화는 거의 없었으나, 유사량과 영양물질 부하량은 다소

  • PDF

Pre-treatment of River Water Using Biological Aerated Filtration (호기성 생물여과 공정을 이용한 하천수 전처리)

  • Choi, Dong-Ho;Choi, Hyung-Joo;Bae, Woo-Keun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.28 no.3
    • /
    • pp.276-285
    • /
    • 2006
  • When polluted stream water was treated with biological aerated filter(BAF) in pilot plant, all operation with 90, 60, 45 and 30 min of EBCT at fixed $0.1m^3air/m^2min$ of aeration showed 80% or higher treatment efficiency of particle materials(SS, turbidity and Chl.-a) and 85% or higher efficiency of ammonia nitrogen removal. It was thought that, in case of BOD, biological stability may sufficiently be assured with BAF because grade III or IV inflow water was changed to grade I for outflow water. In case of $COD_{Mn}$, about 60% of removal efficiency was found. When the mechanism of the result was investigated, about 30% of COD materials was produced by algae clogged in the reactor. There was almost no biological decomposition because specific substrate utilization rate of algogenic organic materials were $0.0245mg{\cdot}COD_{Mn}/mg{\cdot}VSS{\cdot}day$, thus partial backwashing(washing the media in 1 m upper of the reactor once a day) was required. It is thought that elevation of removal rate about 10% of $COD_{Mn}$ and 5.5% of $BOD_5$ could be obtained with partial backwashing resulting in assurance of biologically more stable raw water and that saving backwashing water may be significant.

Research on water quality and flow rate measurement by applying GPS electronic Floater standard experimental method when water environmental chemical accidents occur (수환경 화학사고 발생시 GPS 전자부자 표준실험법 적용을 통한 수질-수리 측정에 대한 연구)

  • Lee, Chang Hyun;Nam, Su Han;Kim, Young Do
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.12
    • /
    • pp.845-853
    • /
    • 2023
  • Recently, along with the increase in chemical accidents, the number of accidents-related disasters has been increasing continuously since 2012, and when looking at the hydrogen fluoride incident which is a representative example of domestic chemical incidents, there is insufficient technology applicable to the incident site. The result was that the damage spread. Therefore, in this paper, we will adapt the water pollution accident response system to a location-based approach, and introduce a measurement method for alternative index tracking using a GPS electronic floater of a location-based index measurement method for real-time response in the water environment when a chemical incident occurs. The research target area is Gumi City, which is the area where the hydrogen fluoride incident occurred, and Gamcheon is selected, and alternative tracking using GPS electronic floater is conducted in the corresponding target area through water quality and flow measurement. As a result, it is possible to measure water quality and flow at the same time in tracker experiments using GPS electronic floater based on the research results, it is believed that using GPS electronic floater will be of great help in disaster response systems for spill incidents in the river.

Mapping the Research Landscape of Wastewater Treatment Wetlands: A Bibliometric Analysis and Comprehensive Review (폐수 처리 위한 습지의 연구 환경 매핑: 서지학적 분석 및 종합 검토)

  • C. C. Vispo;N. J. D. G. Reyes;H. S. Choi;M.S. Jeon;L. H. Kim
    • Journal of Wetlands Research
    • /
    • v.25 no.2
    • /
    • pp.145-158
    • /
    • 2023
  • Constructed wetlands (CWs) are effective technologies for urban wastewater management, utilizing natural physico-chemical and biological processes to remove pollutants. This study employed a bibliometric analysis approach to investigate the progress and future research trends in the field of CWs. A comprehensive review of 100 most-recently published and open-access articles was performed to analyze the performance of CWs in treating wastewater. Spain, China, Italy, and the United States were among the most productive countries in terms of the number of published papers. The most frequently used keywords in publications include water quality (n=19), phytoremediation (n=13), stormwater (n=11), and phosphorus (n=11), suggesting that the efficiency of CWs in improving water quality and removal of nutrients were widely investigated. Among the different types of CWs reviewed, hybrid CWs exhibited the highest removal efficiencies for BOD (88.67%) and TSS (95.67%), whereas VSSF, and HSSF systems also showed high TSS removal efficiencies (83.25%, and 78.83% respectively). VSSF wetland displayed the highest COD removal efficiency (71.82%). Generally, physical processes (e.g., sedimentation, filtration, adsorption) and biological mechanisms (i.e., biodegradation) contributed to the high removal efficiency of TSS, BOD, and COD in CW systems. The hybrid CW system demonstrated highest TN removal efficiency (60.78%) by integrating multiple treatment processes, including aerobic and anaerobic conditions, various vegetation types, and different media configurations, which enhanced microbial activity and allowed for comprehensive nitrogen compound removal. The FWS system showed the highest TP removal efficiency (54.50%) due to combined process of settling sediment-bound phosphorus and plant uptake. Phragmites, Cyperus, Iris, and Typha were commonly used in CWs due to their superior phytoremediation capabilities. The study emphasized the potential of CWs as sustainable alternatives for wastewater management, particularly in urban areas.

Water Digital Twin for High-tech Electronics Industrial Wastewater Treatment System (I): e-ASM Development and Digital Simulation Implementation (첨단 전자산업 폐수처리시설의 Water Digital Twin(I): e-ASM 모델 개발과 Digital Simulation 구현)

  • Shim, Yerim;Lee, Nahui;Jeong, Chanhyeok;Heo, SungKu;Kim, SangYoon;Nam, KiJeon;Yoo, ChangKyoo
    • Clean Technology
    • /
    • v.28 no.1
    • /
    • pp.63-78
    • /
    • 2022
  • Electronics industrial wastewater treatment facilities release organic wastewaters containing high concentrations of organic pollutants and more than 20 toxic non-biodegradable pollutants. One of the major challenges of the fourth industrial revolution era for the electronics industry is how to treat electronics industrial wastewater efficiently. Therefore, it is necessary to develop an electronics industrial wastewater modeling technique that can evaluate the removal efficiency of organic pollutants, such as chemical oxygen demand (COD), total nitrogen (TN), total phosphorous (TP), and tetramethylammonium hydroxide (TMAH), by digital twinning an electronics industrial organic wastewater treatment facility in a cyber physical system (CPS). In this study, an electronics industrial wastewater activated sludge model (e-ASM) was developed based on the theoretical reaction rates for the removal mechanisms of electronics industrial wastewater considering the growth and decay of micro-organisms. The developed e-ASM can model complex biological removal mechanisms, such as the inhibition of nitrification micro-organisms by non-biodegradable organic pollutants including TMAH, as well as the oxidation, nitrification, and denitrification processes. The proposed e-ASM can be implemented as a Water Digital Twin for real electronics industrial wastewater treatment systems and be utilized for process modeling, effluent quality prediction, process selection, and design efficiency across varying influent characteristics on a CPS.