• Title/Summary/Keyword: 오목형 단면

Search Result 7, Processing Time 0.021 seconds

Formability of deep drawing process for reentrant cross section (오목형 단면 딥드로잉에서의 성형성)

  • 박민호;김상진;서대교
    • Transactions of Materials Processing
    • /
    • v.5 no.2
    • /
    • pp.138-144
    • /
    • 1996
  • The differences of formability with maximum cup depth of drawn product and thickness strain distribution are compared for two kinds of blank shapes which are suggested optimum shape and conventional square shape. The suggested blank is determined by backward tracing technique of rigid-plastic FEM. The deeper cup without wrinkle and flange part could be obtained from the suggested blank shape however the cross sevtion sup from the square blank could not be kept smooth thickness strain distribution and defended those phenomena..

  • PDF

Hydraulic Assessment of Channel Form on the Narrow Pass of Channel (하천 협착부에서 하도형태에 관한 하도수리학적 평가 -낙동강 선산지구를 중심으로 -)

  • Choi, Ho-Kyun;Kim, Won-Il;Ryu, Young-Hoon;Lee, Sam-Hee;Ahn, Won-Sik
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1711-1715
    • /
    • 2007
  • 하천에서는 나라마다 하천마다 구간마다 독특한 하도특성을 지니고 있다. 우리나라는 전 국토의 70 %가 산지로 이루어져 있으며, 이로 인하여 특이한 하도형태의 모습을 보이는 구간이 산재하고 있다. 그 대표적인 모습이 충적하도와 침식하도가 연속해 발생하는 과정에서 나타나는 것이 하천 협착부 구간이다. 이러한 하천협착부 주변지역은 전형적인 수해상습 구간이 되는 경우가 많다. 이러한 상황임에도 불구하고 현재까지 우리 나라에서는 이러한 협착부 구간에서 하도특성을 반영한 연구 및 설계 사례가 전무한 실정이다. 따라서, 본 연구에서는 낙동강 선산지역의 하천 협착부에서의 하도 수리학적 의미와 하도형태에 대하여 조사하고 분석하였다. 연구 결과, 모래하천인 조사구간의 저수로 하상에서 아주 미세한 유사분급 현상은 확인할 수 있었지만, 명쾌한 자연 영력에 의한 유사분급 현상이라 판단하기에는 어려운 부분이 있었다. 이는 완만한 하상경사, 균일성에 가까운 하상재료의 공급에 기인한다고 추정할 수 있었다. 그러나 이와 같은 자연적인 현상보다는 골재채취 등의 원인에 따른 유사분급이 확연하다고 추정되었다. 그리고 협착부의 배수구역에서 과거 활발했던 이동상 단단면 하도형태가 유심부의 이동과 더불어 최근 급격하게 복단면화가 진행되고 있음을 확인하였다. 이와 더불어 저수로의 하폭이 크게 줄어드는 현상을 확인할 수 있었다. 이와 같은 현상은 궁극적으로 이상홍수 발생시의 복단면 가중 또는 홍수단면적 축소, 저수로에서의 호안 또는 제방 아래부분의 국소세굴이 야기될 수 있음을 시사한다.원주교각에 대한 국부세굴 특성을 검토하였다. 또한 원주형의 교각에서는 단일원주보다는 원주군으로 설치되는 경우가 대부분이며 이때 교각의 직경(D)에 대한 교각 사이 간격$(L_d)$의 비$(L_d/D)$에 따른 전면교각에서의 수류변화의 영향이 후면교각에 작용하여 상호 복합적인 흐름 및 세굴특성을 나타내므로 이와 같은 복렬형 원주군의 세굴특성을 파상형 원주교각에 적용하여 국부세굴의 크기 변화를 해석하였다. 따라서, 교각주위에서의 수류특성 및 세굴의 변동은 원주군 및 교각파상의 크기와 간격 등과 같은 구조물의 배열조건과 Froude 수, 수심 등의 수리학적 조건에 따라 달라지므로 이의 조건을 체계적으로 변화시켜 가면서 교각주위에서의 국부세굴 및 세굴 감소특성을 검토하였다. 실험결과 오목 및 볼록 파상형 원주 주위에서의 세굴크기는 원형원주와 비교하여 전체적으로 감소하는 것으로 확인되었으며 특히 오목형 $B/\acute{h}=3$에서는 세굴경감효과가 탁월하여 70%이상 감소하는 것으로 확인되었으나 볼록형 $B/\acute{h}=5$에서는 세굴촉진특성이 나타나고 있는 것으로 나타났다. 따라서, 파상형 원주에서는 하강류나 와류를 파상형의 내부로 유도하여 세굴의 크기를 조절할 수 있는 최적의 파상이 존재하고 있는 것으로 예측되었다.원 분야 소프트웨어의 개발에 기본 토대를 제공할 것으로 판단된다.았다. 또한 저자들의 임상병리학적 연구결과가 다른 문헌에서 보고된 소아 신증후군의 연구결과와 큰 차이

  • PDF

Coupling loss variation as the shape of fiber ends and the fiber arrangement in a fiber Fabry-Perot filter (광섬유 Fabry-Perot필터에서 광섬유 단면의 모양과 배치에 따른 결합손실 변화)

  • 김종호;예윤해
    • Korean Journal of Optics and Photonics
    • /
    • v.8 no.3
    • /
    • pp.230-235
    • /
    • 1997
  • Coupling loss variation as the shape of fiber ends and the fiber arrangement in a fiber Fabry-Perot cavity, formed with two optical fibers with dielectric mirror coatings on their ends, is analyzed. For the intended features it is assumed that one of two fibers is processed to have a concave mirror whose curvature is the same as that of the wavefront of the Gaussian beam from the first fiber. In this assumption, it was turned out that the coupling loss at the cavity length of 15 ${\mu}{\textrm}{m}$ is less than 0.5% even with tilt angle of 0.2$^{\circ}$, curvature error of 70 ${\mu}{\textrm}{m}$, cavity length error of 8 ${\mu}{\textrm}{m}$, and lateral alignment error of 0.5 ${\mu}{\textrm}{m}$. Thus, low loss and high-finesse fiber Fabry-Perot filters whose cavity length is greater than several ${\mu}{\textrm}{m}$ can be obtained easily if the receiving fiber end is properly formed.

  • PDF

A Study on the Hull Form Development of the 25 Knots Class Planing Hull Form Fishing Boat (25노트급 활주형 어선의 기본선형 개발에 관한 연구)

  • LEE KWI-JOO;JOA SOON-WON;PARK MYUNG-KYU;SHIN YOUNG-KYUN
    • Journal of Ocean Engineering and Technology
    • /
    • v.17 no.5 s.54
    • /
    • pp.88-94
    • /
    • 2003
  • A series of tests of 5 model ships, selected from a data survey of 10 Gross Tonnage actual fishing boats, were performed in two circulating water channels (Chosun University in Korea and WJFEL in Japan), in order to develop the basic hull form of a 25 knots-class fishing boat. Resistance tests, trim and sinkage measurements and wave pattern observations etc., were included in each I1wdel test, and the model test results were compared and analyzed. The result was as follows: P-4 hull form ship changed into Deep V type bow is the best hull form with good performance, especially with regard to ship's resistance efficiency.

Internal Waves and Surface Mixing Observed by CTD and Echo Sounder in the mid-eastern Yellow Sea (황해 중동부해역에서 CTD와 음향탐지기로 관측한 내부파와 표층 혼합)

  • Lee, Sang-Ho;Choi, Byoung-Ju;Jeong, Woo Jin
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.18 no.1
    • /
    • pp.1-12
    • /
    • 2013
  • Acoustic backscatter profiles were measured by Eco-sounder along an east-west section in the mid-eastern Yellow Sea and at an anchoring station in the low salinity region off the Keum River estuary in September 2012, with observing physical water property structure by CTD. Tidal front was established around the sand ridge developed in 50 m depth region. Internal waves measured by Eco-sounder during low tide period in the eastern side of the sand ridge were nonlinear depression waves with wave height of 15 m and mean wavelength of 500 m. These waves were interpreted into tidal internal waves that were produced by tidal current flowing over the sand ridge to the southeast. When weakly non-linear soliton model was applied, propagation speed and period of these internal depression wave were 50 m/s and 16~18 min. Red tides by Dinoflagelates Cochlodinium were observed in the sea surface where strong acoustic scattering layer was raised up to 7 m. Hourly CTD profiles taken at the anchoring station off the Keum River estuary showed the halocline depth change by tidal current and land-sea breeze. When tidal current flowed strongly to the northeast during flood period and land-breeze of 7 m/s blew to the west, the halocline was temporally raised up as much as 2 m and acoustic profile images showed a complex structure in the surface layer within 5-m depth: in tens of seconds the declined acoustic structure of strong and weak scattering signals alternatively appeared with entrainment and intrusion shape. These acoustic profile structures in the surface mixed layer were observed for the first time in the coastal sea of the mid-eastern Yellow Sea. The acoustic profile images and turbidity data suggest that relatively transparent low-layer water be intruded or entrained into the turbid upper-layer water by vertical shear between flood current and land breeze-induced surface current.

The Effects of Drag Reduction by Flow Control Grooves using CFD (CFD를 이용한 유동제어 띠에 의한 저항감소 효과 조사)

  • Park, Dong-Woo;Yoon, Hyun-Sik;Koo, Bon-Guk
    • Journal of Navigation and Port Research
    • /
    • v.38 no.4
    • /
    • pp.335-341
    • /
    • 2014
  • Faced with global agenda of greenhouse abatement program including regulations and $CO_2$ emission trading scheme, shipping companies are enforced to a high level of efficiency in fuel consumption. Accordingly shipbuilding companies worldwide are required to develop fuel-efficient ships which otherwise traditionally consume a great amount of fossil fuels. In this dissertation, relevant to the improvement of fuel efficiency for commercial ships, design methodology through the numerical simulations are intensively described. This work consists of derivation of effective hydrodynamic design practice based on the application of longitudinal grooves to effectively improve the pressure distribution around ship hull. The primary objective of the present study is to improve ship resistance performance using longitudinal grooves which originate from long strips on the abdomen of humpback whale. Several groove shapes have been extensively investigated and the proposed shape efficiently controlled the variation of pressure distributions acting on the hull surface.

Updating DEM for Improving Geomorphic Details (미기복 지형 표현을 위한 DEM 개선)

  • Kim, Nam-Shin
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.12 no.1
    • /
    • pp.64-72
    • /
    • 2009
  • The method to generate a digital elevation model(DEM) from contour lines causes a problem in which the low relief landform cannot be clearly presented due to the fact that it is significantly influenced by the expression of micro landform elements according to the interval of contours. Thus, this study attempts to develop a landcover burning method that recovers the micro relief landform of the DEM, which applies buffering and map algebra methods by inputting the elevation information to the landcover. In the recovering process of the micro landform, the DEM was recovered using the buffering method and elevation information through the map algebra for the landcover element for the micro landform among the primary DEM generation, making landcover map, and landcover elements. The recovering of the micro landform was applied based on stream landforms. The recovering of landforms using the buffering method was performed for the bar, which is a polygonal element, and wetland according to the properties of concave/convex through generating contours with a uniform interval in which the elevation information applied to the recovered landform. In the case of the linear elements, such as bank, road, waterway, and tributary, the landform can be recovered by using the elevation information through applying a map algebra function. Because the polygonal elements, such as stream channel, river terrace, and artificial objects (farmlands) are determined as a flat property, these are recovered by inputting constant elevation values. The results of this study were compared and analyzed for the degree of landform expression between the original DEM and the recovered DEM. In the results of the analysis, the DEM produced by using the conventional method showed few expressions in micro landform elements. The method developed in this study well described wetland, bar, landform around rivers, farmland, bank, river terrace, and artificial objects. It can be expected that the results of this study contribute to the classification and analysis of micro landforms, plain and the ecology and environment study that requires the recovering of micro landforms around streams and rivers.

  • PDF