• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.158-158
• /
• 2015

대부분의 대규모 배수지는 고지대에 위치함으로써 자연유하를 통해 배, 급수지역으로 용수를 공급한다. 이를 위해 배수지 전단에는 가압장이 위치하여 정수장에서 처리된 용수를 고지대에 위치한 배수지로 송수한다. 이때 가압장에서 발생하는 전력소비량이 매우 높은 것으로 알려져 있으며, 효율적인 펌프운영을 통해 상당한 전력비용 절감이 가능할 것으로 판단된다. 일반적인 가압장의 운영은 시스템 운영자의 경험을 토대로 해당 가압장에 연결된 배수지의 수위에 따라 펌프의 작동여부를 결정하는 방법이 주로 사용되고 있다. 이러한 운영방법은 용수공급의 안전성을 우선시함으로써 배수지의 수위를 일정하게 유지하고자 빈번하게 펌프를 작동하게 되고 따라서 가압장에서 소모되는 전력량이 커서 운영효율 측면에서는 바람직하지 않다고 할 수 있다. 또한 빈번한 펌프의 작동으로 인해 펌프의 수명이 단축될 뿐만 아니라, 배수지내 용수의 수질저하 문제도 발생할 수 있다. 본 연구에서는 효율적인 펌프장 운영을 위해 급수지역의 24시간 용수사용량을 예측하고, 그에 따른 펌프장의 가압 유량 및 양정을 파악하여 적정용량의 펌프를 선정하고 운영함으로써 펌프의 운영비용의 최소화 및 안정적인 용수공급을 동시에 달성하고자 한다. 이를 위해, 실시간 최적화 모형을 개발하였다. 개발된 최적화 모형은 상수관망해석 프로그램(EPAENT)을 연계하여 수요절점의 수압조건 및 운영상황을 모의하였다. 최적화 기법으로는 유전자알고리즘을 사용하였으며, 실제 시스템의 운영상황를 반영하기 위한 다양한 제약조건(operational constraints)을 적용하였다. 개발된 모형은 정속펌프(혹은 On/Off 펌프) 뿐만 아니라, 최근 실무에서 널리 사용되고 있는 변속펌프(variable speed pump)를 추가적으로 고려하였다. 개발된 모형은 국내에서 실제 운영되고 있는 송, 배수 시스템에 적용하여 모형의 실무 적용가능성을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.1-6
• /
• 2019

The objective of this study was to investigate performance characteristics of thermal management system(TMS) in a fuel cell electric vehicle with 100kW Fuel Cell(FC) system. In order to build up analytic modelling for TMS, each component was installed and tested under various operating conditions, such as water pump, radiator, 3-Way valve, COD heater, and FC stack etc. and as the results of them, correlations reflecting component's characteristics with flow rate, air velocity were developed. Developed analytic modelling was carried out under various operating conditions on the road. To verify modelling's accuracy, after prediction for optimum coolant flow rate was fulfilled under certain operating conditions, such as FC system, water pump speed, opening of 3-way valve, and pipe resistance, analytic and experimental values were compared and good agreement was shown. In order to predict cold-start operating performance for analytic modelling, coolant temperature variation was analyzed with $-20^{\circ}C$ ambient temperature and duration was predicted to rise in optimum temperature for FC. Because there is appropriate temperature difference between inlet and outlet of FC stack to operate FC system properly, related analysis was performed with respect to power consumption for TMS and heat rejection rate and performance map was depicted along with FC operating conditions.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.69-75
• /
• 2022

We propose energy-efficient scheduling considering real-time constraints and energy efficiency in smart mobile with heterogeneous multi-core structure. Recently, high-performance applications such as VR, AR, and 3D game require real-time and high-level processings. The big.LITTLE architecture is applied to smart mobiles devices for high performance and high energy efficiency. However, there is a problem that the energy saving effect is reduced because LITTLE cores are not properly utilized. This paper proposes a heterogeneous multi-core assignment technique that improves real-time performance and high energy efficiency with big.LITTLE architecture. Our proposed method optimizes the energy consumption and the execution time by predicting the actual task execution time using SVM (Support Vector Machine). Experiments on an off-the-shelf smartphone show that the proposed method reduces energy consumption while ensuring the similar execution time to legacy schemes.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.264-264
• /
• 2017

국외의 상수도 원격검침 시스템 내 데이터 전송방식은 도시 규모, 계량기의 밀도, 전력공급 여부 및 통신망의 설치 여부 등을 종합적으로 고려하여 결정되었다. 대부분의 스마트워터미터 제조업체들은 계량기의 부호기가 공급하는 판독 내용(데이터)을 전송할 검침단말기와 근거리 통신망(neighborhood area network)을 연계하여 개발 및 판매하였으며, 자체 소유 통신 프로토콜을 사용하여 라디오 주파수(RF) 통신 기술을 사용하고 있다. 광역통신망(wide area network)의 경우, 노드(말단의 계량기 및 센서)들과 이에 연결된 통신망 들을 포함한 네트웍의 배열이나 구성이 스타(star), 메쉬(mesh), 버스(bus), 나무(tree) 등의 형태로 통신망이 구성되어 있으나, 스타와 메쉬형 통신망 구성형태가 가장 널리 활용되는 것으로 조사되었다. 시스템 통합운영관리 업체들인 IBM, Oracle, Itron 등은 용수 인프라 관리 또는 통합네트워크 솔루션 등의 통합 물관리 시스템(integrated water management system)을 개발하여 현장적용을 하고 있으며, 원격검침 시스템을 통해 고객들의 현재 소비량과 과거 누적 소비량, 누수 감지 서비스 및 실시간 요금 고지 등을 실시간으로 웹 포털과 앱을 통해 제공하고 있다. 또한, 일부 제조업체들은 도시 용수공급/소비 관리자가 주민의 용수사용량을 모니터링하여 일평균 용수사용량 및 사용 경향을 파악하고, 누수를 검지하여 복구 및 용수 사용 지속가능성 지수를 제시하고, 실시간으로 주민의 용수사용량 관련 데이터를 모니터링하여 용수공급의 최적화를 위한 의사결정지원 서비스를 용수공급자에게 제공하고 있다. 최근에는 인공지능을 활용해 가정용수의 용도별(세탁용수, 화장실용수, 샤워용수, 식기세척용수 등) 사용량 곡선을 패터닝하여 profiling 기법을 도입해, 스마트워터미터에서 용수사용량이 통합되어 검지될 시 용수사용량의 세부 용도별 re-profiling 기법을 도입하여 가정용수내 과소비되는 지점을 도출 후 절감을 유도하는 기술이 개발 중이다. 또한, 미래 용수 사용량 예측을 위해 다양한 시계열 자료를 분석하는 선형 종속 모형(자기회귀모형, 자기회귀이동평균모형, 자기회귀적분이동평균모형 등)과 비선형 종속 모형(Fuzzy Logic, Neural Network, Genetic Algorithm 등)을 활용한 예측기능이 구축되어 상호 비교하여 최적의 용수사용량 예측 도구를 제공되고 있다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.1
• /
• pp.87-99
• /
• 2024

This study deals with the application of an artificial neural network (ANN) model to predict power consumption for utilizing seawater source heat pumps of recirculating aquaculture system. An integrated dynamic simulation model was constructed using the TRNSYS program to obtain input and output data for the ANN model to predict the power consumption of the recirculating aquaculture system with a heat pump system. Data obtained from the TRNSYS program were analyzed using linear regression, and converted into optimal data necessary for the ANN model through normalization. To optimize the ANN-based power consumption prediction model, the hyper parameters of ANN were determined using the Bayesian optimization. ANN simulation results showed that ANN models with optimized hyper parameters exhibited acceptably high predictive accuracy conforming to ASHRAE standards.

• Journal of Energy Engineering
• /
• v.28 no.1
• /
• pp.65-72
• /
• 2019

The Korean government is aiming to produce 20% of the electricity using renewable energy sources by 2030. Ocean renewable energy sources which are abundant in South Korea can do an important role to achieve the goal. This paper introduces a tidal current energy converter utilizing flow induced vibrations which can efficiently work even in the currents slower than 1.0m/s and suggests optimal designs of the tidal energy converter based on speeds of the tidal currents in seven different coastal regions in South Korea. Moreover, the theoretical annual energy production by the tidal converter is estimated at theses costal areas. The total amount of the annual energy production by the tidal energy converter is predicted as 221.77 TWh which is equivalent to 42.3% of the electric consumption of South Korea in 2013. The result shows that the tidal current energy converter can be an important role to achieve the goal of the Korean government.

• Journal of Korea Water Resources Association
• /
• v.54 no.spc1
• /
• pp.1083-1093
• /
• 2021

It is an essential to predict water usage for establishing an optimal supply operation plan and reducing power consumption. However, the water usage by consumer has a non-linear characteristics due to various factors such as user type, usage pattern, and weather condition. Therefore, in order to predict the water consumption, we proposed the methodology linking various techniques that can consider non-linear characteristics of water use and we called it as KWD framework. Say, K-means (K) cluster analysis was performed to classify similar patterns according to usage of each individual consumer; then Wavelet (W) transform was applied to derive main periodic pattern of the usage by removing noise components; also, Deep (D) learning algorithm was used for trying to do learning of non-linear characteristics of water usage. The performance of a proposed framework or model was analyzed by comparing with the ARMA model, which is a linear time series model. As a result, the proposed model showed the correlation of 92% and ARMA model showed about 39%. Therefore, we had known that the performance of the proposed model was better than a linear time series model and KWD framework could be used for other nonlinear time series which has similar pattern with water usage. Therefore, if the KWD framework is used, it will be possible to accurately predict water usage and establish an optimal supply plan every the various event.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.3
• /
• pp.183-191
• /
• 2021

Non-intrusive load monitoring is a technology that can be used for predicting and classifying the type of appliances through real-time monitoring of user power consumption, and it has recently got interested as a means of energy-saving. In this paper, we propose a system for classifying appliances from user consumption data by combining GAF(Gramian angular field) technique that can be used for converting one-dimensional data to the two-dimensional matrix with convolutional neural networks. We use REDD(residential energy disaggregation dataset) that is the public appliances power data and confirm the classification accuracy of the GASF(Gramian angular summation field) and GADF(Gramian angular difference field). Simulation results show that both models showed 94% accuracy on appliances with binary-state(on/off) and that GASF showed 93.5% accuracy that is 3% higher than GADF on appliances with multi-state. In later studies, we plan to increase the dataset and optimize the model to improve accuracy and speed.

• Journal of Environmental Policy
• /
• v.12 no.3
• /
• pp.97-122
• /
• 2013

The ARDL(Autoregressive Distributed Lag) method is employed analyzes the long-run equilibrium relationships among environmental pollution($CO_2$ emissions) per capita, income levels per capita, and energy consumption per capita. The error correction model is employed to analyze the short-term effects of income and energy consumption on $CO_2$ emissions. The Toda-Yammamoto method is employed for causal analysis among the three variables. The results show that income levels, energy consumption, and $CO_2$ emissions are cointegrated. We found the N type relationship between income and $CO_2$ emissions. Long-term elasticities of income and energy consumption with respect to $CO_2$ emission were greater than their short-term elasticities. There were a bilateral causality between energy consumption and $CO_2$ emissions. There was a unilateral causality from $CO_2$ emissions to income and from energy consumption to income not vice versa. Energy consumption can be an important variable to contribute to forecasting $CO_2$ emissions.

• The KIPS Transactions:PartA
• /
• v.12A no.1 s.91
• /
• pp.53-58
• /
• 2005

The use of computers for control and monitoring of industrial process has expanded greatly in recent years. The computer used in such applications is shared between a certain number of time-critical control and monitor function and non time-critical batch processing job stream. Embedded systems encompass a variety of hardware and software components which perform specific function in host computer. Many embedded system must respond to external events under certain timing constraints. Failure to respond to certain events on time may either seriously degrade system performance or even result in a catastrophe. In the design of real-time embedded system, decisions made at the architectural design phase greatly affect the final implementation and performance of the system. Flexibility indicates how well a particular system architecture can tolerate with respect to satisfying real-time requirements. The degree of flexibility of real-time system architecture indicates the capability of the system to tolerate perturbations in timing related specifications. Given degree of flexibility, one may compare and rank different implementations. A system with a higher degree of flexibility is more desirable. Flexibility is also an important factor in the trade-off studies between cost and performance. In this paper, it is identified the need for flexibility function and shows that the existing real-time analysis result can be effective. This paper motivated the need for a flexibility for the efficient analysis of potential design candidates in the architectural design exploration or real time embedded system.