• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.154-159
• /
• 2010

Recent concrete structures have been being constructed with higher strength concrete than normal strength concrete. Therefore, it is necessary to review the applicabilities of current design codes and models for the prediction of mechanical behaviors of concrete materials such as creep. To investigate the applicability of creep model with the consideration of the strength level of concrete, three current models (ACI 209R, CEB-FIP MC90 and EC2) were studied and compared with series of experimental results. It was shown that EC2 model which is the updated model of CEB-FIP MC90 better predicts creep coefficient for high strength level concretes and showed relatively good agreements with experimental data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7B
• /
• pp.664-672
• /
• 2002

This paper analyzes a sequential estimator with flexible structure for rapid acquisition of the m-sequence signals. If the received PN chips stored in the estimator's internal registers as initial loading values include one error, this chip with error can be corrected through multiple local PN code generators to achieve high-speed acquisition performance. Hamming distance between regenerated local PN codes from the proposed system and received PN code is compared with given threshold to choose a possible correct path and to declare success of the code acquisition. Using signal flow graph, average acquisition time that depends on detection and false alarm probability is calculated. By modifying generally used matched filter structure for PN code acquisition, the proposed system provides flexible structure and rapid acquisition process.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.6 no.4
• /
• pp.1-6
• /
• 2002

A numerical heat transfer analysis and the structural analysis were performed for the design of sub-scale combustion chamber's coolant passage. The heat flux through the combustion chamber wall was estimated by 2-D heat transfer analysis of compressible hot gas and the result was applied as a thermal boundary condition of 3-D analysis. The heat flux estimated by the present method agreed well with the experimental correlation and proved to be insensitive to cooling condition. So the same thermal boundary condition was applied for various operating conditions. The maximum temperature of combustion chamber wall was predicted by 3-D analysis for single coolant passage and the result will be used for the development of a regeneratively cooled combustion chamber. Also estimated were the stress distribution and structural safety of coolant passage through the static structural analysis.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.117-120
• /
• 2020

본 논문은 인공지능 메이커 교육과 관련한 요소를 논문 네트워크 키워드 분석과 다양한 빅데이터를 종합하여 핵심용어를 선정 후 인공지능 메이커 교육을 시스템 다이내믹스의 Vensim프로그램으로 인과지도(Casual Loop Diagramming)를 구조분석(모델의 구조)하여 예측 결과를 토대로 향후 미래 상황 추출 및 정책 결정 연구에 영향을 기여한다. 연구 결과 인공지능 교육 정책은 추후 인공지능 교육과 메이커 교육을 융합한 교육 관련 산업이 증대할 것으로 예측되며 교육 경쟁력 향상과 창의적 인재 양성, OTT를 이용한 인공지능 교육 콘텐츠 향상으로 학습에 활용성이 증대하게 된다. 또한 인공지능 교육 정책은 프로그래밍 교육으로 연결되어 성장기 학습자들의 사고력과 정서 발달에 도움 되며 다양한 교재 및 기기 등장으로 인한 학습에 다양성 역시 증가할 것으로 예측된다. 학교 차원에서는 교수·연구 지원 활동이 증가하여 수업 전문성을 가진 교사가 늘어나 학교 교육의 질은 확대되고 학부모는 인공지능 교육 정책에 긍정적으로 된다. 시스템 다이내믹스는 구조가 형태를 결정짓는다는 세계관에 기초하여 피드백 루프와 동태적 형태 유형을 파악하며 다양한 가능성이 존재하게 된다. 이는 추후 다양한 연구를 통해 인공지능 교육 정책 인과지도의 확대로 연결될 수 있음을 암시하며 본 논문을 통해 인공지능 교육 연구 확산에 시발점이 되었으면 한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.12
• /
• pp.2725-2730
• /
• 2012

In this paper, for improving the H.264/AVC hardware performance, we propose an inter predictor hardware design using a multi reference frame selector and an implicit weighted predictor. previous reference frame are reused for Low Memory Bandwidth. The size of the reference memory in the predictor was reduced by about 46% and the external memory access rate was reduced by about 24% compared with the one in the reference software JM16.0. We designed the proposed system with Verilog-HDL and synthesized inter predictor circuit using the Magnachip 0.18um CMOS standard cell library. The synthesis result shows that the gate count is about 2,061k and the design can run at 91MHz.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.12
• /
• pp.1107-1114
• /
• 2011

In this paper, the fatigue life of a laser peened structure was predicted. In order to calculate residual stress induced by laser peening finite element simulation was carried out. Modified Goodman equation was used to consider the effect of compressive residual stress induced by laser peening in fatigue analysis. In addition, additive adjustment factor approach was applied to consider S-N curve model uncertainty. Consequently, the reliable bounds of the predicted fatigue life of the laser peened structure was determined.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.12
• /
• pp.75-81
• /
• 2004

AE-CORDIC improves the CORDIC operation speed with a rotation direction pre-computation algorithm. Its CORDIC iteration stages consist of non-predictable rotation direction states and predictable rotation stages. The non-predictable stages are replaced with lookup-table which has smaller hardware size than CORDIC iteration stages. The predictable stages can determine rotation direction with the input angle and simple encoder. In this paper, a rotation direction pre-computation algorithm with input angle encoder is proposed. and AE-CORDIC which have optimized Lookup-table is compared with the P-CORDIC algorithm. Hardware size, delay, and SQNR of the AE-CORDIC are verified with Samsung 0.18㎛ technology and Synopsys design compiler when input angle bit length is 16.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.6 no.2
• /
• pp.97-105
• /
• 1996

In this paper, an adaptive model predictive controller for nodinear processes using fuzzy model is proposed. Adaptive structure is implemented by recursive fuzzy modeling. The model and control law can be obtained the same as GPC, because the consequent parts of the fuzzy model comprise linear equations of input and output variables. The proposed Adaptive fuzzy model predictive controller (AFMPC) controls nonlinear process well due to the intrinsic nonlinearity of the fuzzy model. When AFMPC's output is variation in the process control input, it maintains zero steady-state offset for a constant reference input and has superior performance. The properties and performance of the proposed control scheme were examined with nonlinear plant by simulation.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.11
• /
• pp.1041-1045
• /
• 2010

Clusters can provide scalable and flexible architectures for parallel computing servers and data centers. Their performance prediction has been a very challenging issue. Existing performance measurement methodologies are able to measure the performance of servers already constructed. Thus they cannot provide a way to predict the overall system performance in advance when designing the system at the initial phase or adding more nodes for more capacity. Therefore, the performance modeling and prediction methodology for large-scale clusters is highly required. In this paper, we suggest a methodology to predict the performance of large-scale clusters, which consists of measurement, modeling and prediction steps. We apply the methodology to a real cluster server and show its usefulness.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06b
• /
• pp.261-266
• /
• 2007

내장형 시스템에 보다 강력한 성능이 요구됨에 따라 내장형 마이크로 프로세서는 보다 깊은 파이프라인을 채택하고 있다. 따라서, 내장형 마이크로 프로세서는 보다 정확한 분기 예측기를 필요로 하고 있다. 이러한 상황에서 분기 예특기의 구조, 성능 및 전력 소모와 전체 시스템의 전력 소모 사이의 trade-off를 분석하는 것은 매우 중요하다. 내장형 환경에서 시스템의 전력 소모는 설계 시 매우 중요하게 고려되어야 한다. 특히 내장형 시스템의 요구사항은 동작할 응용 프로그램에 의하여 규정되고, 전력 소모도 응용프로그램의 구조와 강하게 연관되어 있다. 본 논문의 목표는 내장형 환경에서 성능-전력 공간에서 분기 예측기를 분석하는 기법을 제시하는 것에 있다. 이를 통하여, 분기 예측기 테이블의 성능-전력을 고려한 최적화된 크기를 찾을 수 있다. 이러한 목표는 수학적 모델링을 통한 정량적 예측의 수행 및 시뮬레이션 결과와의 비교를 통한 수학적 모델링의 검증의 과정을 통하여 이루어진다. 결과는 우리의 수학적 모델이 성능-전력 공간에서 분기 예측기 테이블의 최적화된 크기 결정의 해법을 제공하고 있음을 보여주고 있다.