• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.29-31
• /
• 2012

사고선박을 예선(또는 예인선)을 이용하여 안전한 곳으로 이동시키기 위해서는 예인소요마력을 계산하여 예선의 척수를 결정해야 한다. 예선의 신속한 투입은 잠재적인 환경오염 및 사고선박의 2차적인 피해로의 확산을 예방할 수 있다. 하지만, 국내에는 아직까지 사고선박의 형태, 크기, 외력조건에 따라 지원되어야 할 예선의 척수 산정 및 최적의 배치방법에 대한 정량적이고 체계적인 결정 시스템이 없는 실정이다. 따라서 본 연구에서는 실선을 활용한 소요마력 측정을 위한 실험방법의 제시와 상황에 따른 예선의 다양한 배치에 따른 장력 측정 방법을 제시하고, 이러한 실험을 통하여 얻은 결과를 이론계산 결과와 비교 분석함으로써 추후 구축하게 될 사고선박 예인지원시스템 프로그램 개발을 위한 이론식을 정립하고자 한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.157-164
• /
• 2024

In 2020, 24,000 TEU ultra-large container ships began arriving at the Busan New Port. In this study, the wind pressure and hydraulic force acting on the hull were calculated to obtain the horsepower required for the tugboats for safe berthing and unberthing of a 24,000 TEU ultra-large container ship at the Busan New Port. When the wind speed is 10 m/s (20 kts), 13,000 TEU container ships meet the tug horsepower standard of the current Busan port tugboat operation rules, but 16,000 TEU and 24,000 TEU container ships do not satisfy the regulations. Therefore, it was proposed to raise the standards for tugboat use by dividing the size of ships of "G/T 150,000 tons or more," which is the largest vessel under the current tugboat use standards, into two stages. Because 140,000 tons requires 12,100 horsepower, 170,000 tons requires 14,500 horsepower, and 230,000 tons requires 18,000 horsepower, the study proposed 16,000 horsepower for 150,000 to less than 200,000 tons and 18,000 horsepower for 200,000 tons or more for the use of tugboats.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.1
• /
• pp.107-113
• /
• 2010

The criteria of tugboat requirement in domestic trading ports have been determined by the administrator of regional maritime affairs and port office on the basis of the regulations for the tugboat operations and management. But, there is a little confusion that the criteria of tugboat requirement and method for calculation of them are different from port to port and total power calculated on the basis of power per tugboat requirements by the number of tugs is not in accordance with total required power for the use of tug in several ports. The comparison of tugboat requirements among domestic major ports showed that it should be necessary for the criteria to be made in unified form. Because the current criteria are only on the basis q the ordinary condition with wind velocity under 10m/s, the criteria on the condition of the wind velocity over 10m/s are suggested to be necessary for the precautions against a disaster such as unexpected strong winds or typhoon.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.405-411
• /
• 2014

It needed the calculation of the required tugboat's power to move the damaged vessel to the safe area for reducing the additional damages. In this paper, it was verified the theoretical calculation method on the required power of tugboat through the 93m real ship tests. From the experiments, it was considered that the theoretical calculation method was sufficient to estimate the required power of tugboat. The resistance of the locked propeller was relatively big portions compared with other static resistances such as air resistance, frictional resistance and residual resistance. And dynamic resistance induced by swing movement and yawing was continuously occurred and it also was great effects on the total resistance. In the future, the safety factor will be considered and the exact prediction of ship's resistance will enhance the efficiency of tugboat because of the minimization of safety factor.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.55-57
• /
• 2011

경인 아라뱃길이 2011년 10월 개장을 앞두고 있다. 경인 아라뱃길이 시작되는 경인항 서해갑문 입출거시 예선사용기준에 대한 연구는 선박운항의 경제성 측면에서 매우 중요한 의미를 지닌다고 할 수 있다. 통상 선박의 크기(톤수)에 따른 예선의 소요마력 및 사용 척수는 대상선박의 크기, 모양, 접근수로, 부두시설의 위치 및 종류, 기타 환경조건 등의 영향을 받으며, 선체에 작용하는 수면상부의 풍압력과 수면하부의 유압력을 고려하여 규정하고 있다. 따라서 본 연구에서는 국내외 예선 규정 및 대상선박에 대한 예선 조종시뮬레이션을 통하여 경인항 서해갑문 입출거시 사용되는 예선의 기준을 설정하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.07a
• /
• pp.63-64
• /
• 2015

안전운항 관점에서 보았을 때, 평택당진항에 입출항하는 거대형선(Vale Max급)의 접안조종운동에 대해서 이론적으로 검토하고 소요예선마력 및 조석류의 강도와 접안 한계를 파악하는 것이 이 연구의 주된 목적이다.