• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.708-710
• /
• 2021

본 논문에서는 X-ray 진단에서 산란선으로 인한 영상의 왜곡을 보정하는 방법으로서 수정된 구조의 AE(Auto-Encoder) 모델에 기반한 방법론을 제안한다. 기존 AE 모델의 계층에 따라 특징지도의 크기가 축소되고 팽창되는 과정에서 영상 복원에 필요한 정보가 소실될 가능성을 보완하기 위하여 동일 레벨 계층 간에 스킵 연결을 추가하였다. 또한 X-ray 영상에서 피사체 세부 부위의 두께와 밀도에 따라 산란선의 영향이 서로 다른 형태로 나타난다는 특성을 학습 과정에 효과적으로 반영하기 위하여 어텐션 모듈을 추가한 네트워크 구조를 도입하였다. 총 80 쌍의 흉부 X-ray 영상 데이터에 대하여 기존의 AE 모델을 사용한 방법 및 U-Net 과 FFA-Net 모델을 사용한 영상 복원 기법의 실험 결과를 상호 비교함으로써 제안된 방법의 타당성을 평가하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.243-248
• /
• 2011

In this paper, we propose a new method to extract palm lines and read it with simple techniques from one photo. We use morphological information and 8-directional contour tracking algorithm. From the digitalized image, we transform original RGB information to YCbCr color model which is less sensitive to the brightness information. The palm region is extracted by simple threshold as Y:65~255, Cb:25~255, Cr:130~255 of skin color. Noise removal process is then followed with morphological information of the palm such that the palm area has more than quarter of the pixels and the rate of width vs height is more than 2:1 and 8-directional contour tracking algorithm. Then, the stretching algorithm and Sobel mask are applied to extract edges. Another morphological information that the meaningful edges(palm lines) have between 10 and 20 pixels is used to exclude noise edges and boundary lines of the hand from block binarized image. Main palm lines are extracted then by labeling method. This algorithm is quite effective even reading the palm from a photographed by a mobile phone, which suggests that this method could be used in various applications.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.521-524
• /
• 2001

신호 대 잡음비가 매우 낮은 수중 음원을 탐지하기 위해서는 많은 센서를 갖는 견인 배열 시스템을 운용하여야 한다. 그러나 이러한 경우 수백 미터에 이르는 배열을 견인함이 끌고 다닐 때 파도와 같은 해수면의 움직임과 견인선의 기동 형태에 따라 원하는 배열 형태를 항상 유지할 수 없다. 그러므로 본 논문에서는 실제 수 중 환경에서 견인되는 배열의 왜곡된 형태를 시간적으로 뿐만 아니라 공간적으로 통합된 센서의 움직임 근거로 한 상관 형태를 잘 표현한 ""Paidoussis"" 방정식을적용하여 이 방정식의 간단화된 형태인 수차 모형(Water pulley)배열을 협대역 목표물 탐지에 이용하였다. [1][2][8] 수차 모형 구조의 배열을 이용하여 사상 기법을 적용하면 수차 모형의 왜곡 특성으로 인해 센서간 간격이 비균일성을 가지는 가상의 선형 배열이 형성되어 진다. 본 논문에서는 사상 기법에 의해 생성된 가상의 선형 배열을 토대로 합성 어패처 방식의 일종인 FFTSA(Fast Fourier Transform Synthetic Aperture) 기법을 이용하여 센서 배열의 입사각 추정 성능에 중대한 영향을 부여하는 코히어런스 주기에 따른 추정 성능의 변화 및 견인함의 이동 경로 변화에 따른 변동 경로 주기에 따른 성능 변화를 분석하였다.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.311-315
• /
• 2000

본 논문에서는 임펄스 잡음과 나카가미 페이딩 채널에서 블록 에러 NFSK 시스템을 제안하고, 이의 성능을 구하였다. 블록 에러 확률을 구하는데 있어서 나카가미 채널 페이딩 속도(즉, slow fading, fast fading)를 고려하여 임펄스 잡음지수의 변화에 따른 성능을 구하였다. 블록 에러의 성능을 개선시키는 방안으로 다이버시티 기법과 에러정정 부호화 기법을 적용하여 다이버시티 수(L), 에러정정능력(M), 임펄스 잡음지수(A)를 함수로 하여 성능 개선이 커지고, 저속 페이딩 (임펄스 잡음지수 A=0.1, 1에서 3dB 개선)보다 고속 페이딩에서 (임펄스 잡음지수 A=0.1, 1에서 2～4dB 개선)의 성능개선 정도가 우수하였다. MRC 다이버시티 기법은 저속 페이딩에서 부호화 기법을 적용했을 때 보다 우수한 성능을 보이고 페이딩의 영향이 클 때 성능개선이 크게 이루어짐을 알 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.32 no.2
• /
• pp.380-386
• /
• 2000

Electron beam (EB) was applied to study the sterilizing techniques for powdered red pepper and ginger by determining their quality over gamma radiation (GR) from the microbiological and organoleptic points of view. The samples showed high microbial loads, such as $10^5{\sim}10^6\;CFU/g$ in total aerobic bacteria, negligible levels in yeasts & molds and $10^2\;CFU/g$ in coliforms. EB irradiation at 5 kGy resulted in the reduction of microbial loads by 2 to 3 log cycles, thereby decreasing the levels of total bacteria to $10^2{\sim}10^3\;CFU/g$ and resulting in negative in coliforms. Decimal reduction doses $(D_{10})$ value on the initial bacterial loads in red pepper were $1.50{\sim}1.54\;kGy$ in EB and $1.68{\sim}1.80\;kGy$ in GR, while powdered ginger showed $1.30{\sim}2.27\;kGy$ in EB and $1.45{\sim}2.77\;kGy$ in GR, respectively. EB and GR showed a similar effect on microbial decontamination for both samples. Microbial populations in stored samples for 4 months at room temperature were not remarkably different from the initial loads in all samples. Irradiation caused little changes in Hunter's color parameters, but that were changable during storage. Sensory evaluations on color and odor of powdered samples indicated that no significant differences were observed among the all samples compared. These results revealed that EB irradiation at optimal dose levels for microbial control was not detrimental to the sensory quality of powdered red pepper and ginger.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.6 no.1
• /
• pp.71-83
• /
• 2004

The purpose of this study is to present an analysis method for the prediction of the changes m ground conditions. To this end, three dimensional convergence displacements are analyzed in several ways to estimate the trend of displacement changes. Three-dimensional arching effect is occurred around the unsupported excavation surface including tunnel face when a tunnel is excavated in a stable rock mass. If the ground condition ahead of tunnel face changes or a weak zone exists, a diagnostic trend of displacement change is observed by the 3 dimensional measurement and numerical analysis. Therefore, the change of ground condition and the existence of a weak zone ahead of tunnel face can be predicted by monitoring 3-dimensional absolute displacements during excavation, and applying the methodology (the ratio of L/C, $C/C_o$, etc.) presented in this study.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.308-316
• /
• 2013

A set of experiments (Shallow Water 2006, SW06) was carried out in shallow water near the New Jersey shelf break in summer 2006. Significant fluctuations in direct and surface reflected arrivals were observed from the chirp data (1100~2900 Hz) measured on a vertical line array. This paper presents a geoacoustic inverssion technique for short-range acoustic data with fluctuating arrivals and inversion results of experimental data. In order to reduce effects of random sea surface on the inversion, the acoustic energy back-propagated from the array to the source through direct and bottom-reflected paths is defined as the objective function. A multi-step inversion scheme is applied to the data using VFSR (Very Fast Simulated Reannealing) optimization technique. The inversion results show a source depth oscillation period equal to the measured ocean surface wave period. The inverted bottom sound speed is 1645 m/s and is similar to that estimated by other work at the same site.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.1
• /
• pp.110-115
• /
• 2005

This paper proposes the method to detect contours of a face, eyes and a mouth in a color image for making an avatar automatically. First, we use the HSI color model to exclude the effect of various light condition, and we find skin regions in an input image by using the skin color is defined on HS-plane. And then, we use deformable templates and Genetic Algorithm(GA) to detect contours of a face, eyes and a mouth. Deformable templates consist of B-spline curves and control point vectors. Those can represent various shape of a face, eyes and a mouth. And GA is very useful search procedure based on the mechanics of natural selection and natural genetics. Second, an avatar is created automatically by using contours and Fuzzy C-means clustering(FCM). FCM is used to reduce the number of face color As a result, we could create avatars like handmade caricatures which can represent the user's identity, differing from ones generated by the existing methods.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.2
• /
• pp.199-210
• /
• 2011

The cables in cable-stayed bridges are under high stress and are very sensitive to vibration due to their small section areas compared with other members. Therefore, it is reasonable to evaluate the cable impact factor by taking into account the dynamic effect due to moving-vehicle motion. In this study, the cable impact factors were evaluated via moving-vehicle-load analysis, considering the design parameters, i.e., vehicle weight, cable model, road surface roughness, vehicle speed, longitudinal distance between vehicles. For this purpose, two steel composite cable-stayed bridges with 230- and 540-m main spans were selected. The results of the analysis were then compared with those of the influence line method that is currently being used in design practice. The road surface roughness was randomly generated based on ISO 8608, and the convergence of impact factors according to the number of generated road surfaces was evaluated to improve the reliability of the results. A9-d.o.f. tractor-trailer vehicle was used, and the vehicle motion was derived from Lagrange's equation. 3D finite element models for the selected cable-stayed bridges were constructed with truss elements having equivalent moduli for the cables, and with beam elements for the girders and the pylons. The direct integration method was used for the analysis of the bridge-vehicle interaction, and the analysis was conducted iteratively until the displacement error rate of the bridge was within the specified tolerance. It was acknowledged that the influence line method, which cannot consider the dynamic effect due to moving-vehicle motion, could underestimate the impact factors of the end-cables at the side spans, unlike moving-vehicle-load analysis.

• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.1168-1174
• /
• 2018

For the initial state of NAND flash memories, error-free and single-error cases are dominant due to a good channel environment on memory cells. It is important to deal with such cases, which affects the overall system performance. However, the conventional schemes for polar codes equally decode the codes even for the error-free and single-error cases since they cannot classify and decode separately. In this paper, a new pre-processing scheme for polar codes is proposed so as to improve the overall decoding latency by decoding the frequent error-free and single-error cases. Before the ordinary decoding process, the proposed scheme first decodes the frequent error-free and single-error cases. According to the experimental results, the proposed pre-processing scheme decreases the average decoding latency by 64% compared to the conventional scheme for (1024, 512) polar codes.