• Solar Energy
• /
• v.12 no.2
• /
• pp.62-78
• /
• 1992

The solar cells of $ITO_{(n)}/Si_{(p)}$, which are ITO thin films deposited and heated on Si wafer 190[$^{\circ}C$], were fabricated by two source vaccum deposition method, and their electrical properties were investigated. Its maximum output is obtained when the com- position of the thin film consist of indium oxide 91[mole %] and thin oxide 9[mole %]. The cell characteristics can be improved by annealing but are deteriorated at temperature above 600[$^{\circ}C$] for longer than 15[min]. Also, we investigated the spectral response with short circuit current of the cells and found that the increasing of the annealing caused the peak shifted to the long wavelength region. And by experiment of the X-ray diffraction, it is shown to grow the grains of the thin film with increasment of annealing temperature. The test results from the $ITO_{(n)}/Si_{(p)}$ solar cell are as follows. short circuit current : Isc= 31 $[mW/cm^2]$ open circuit voltage : Voc= 460[mV] fill factor : FF=0.71 conversion efficiency : ${\eta}$=11[%]. under the solar energy illumination of $100[mW/cm^2]$.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.224-229
• /
• 2010

Indium oxide $(In_2O_3)$ thin films have been prepared on glass substrate by using radio-frequency reactive magnetron sputtering with changing the oxygen flow ratio. The substrate temperature was kept at a fixed value of $400^{\circ}C$, and the sputtering gas and reactive gas were supplied with argon and oxygen, respectively. The oxygen partial flow ratio was varied by controlling the amount of oxygen with respect to the total mixed gases, 10%, 20%, 30%, 40%, and 50%. The optical, electrical, and structural properties of the deposited thin films were investigated by using ultraviolet-visible-near infrared spectrophotometer, Hall measurement, and X-ray diffractometer and scanning electron microscopy. The $In_2O_3$ thin film deposited at 20% of oxygen flow ratio showed an average transmittance of 86% in the wavelength range of 430~1,100 nm, an electrical resistivity of $1.1{\times}10^{-1}{\Omega}cm$. The results show that the transparent conducting films with optimum conditions can be achieved by controlling the oxygen flow ratio.

• Journal of Life Science
• /
• v.21 no.9
• /
• pp.1226-1233
• /
• 2011

In neurons, kinesin is the molecular motor that transport cargos along microtubules. KIF5s (alias kinesin-I), are heterotetrameric motor conveying cargos, but the mechanism as to how they recognize and bind to a specific cargos has not yet been completely elucidated. To identify the interaction proteins for KIF5C, yeast two-hybrid screening was performed, and specific interaction with the $\underline{S}$am68-$\underline{l}$ike $\underline{m}$ammalian protein $\underline{2}$ (SLM-2), a member of the $\underline{s}$ignal $\underline{t}$ransducers and $\underline{a}$ctivators of $\underline{R}$NA (STAR) family of RNA processing proteins, was found. SLM-2 bound to the carboxyl (C)-terminal region of KIF5C and to other KIF5 members. The C-terminal domain of Sam68, SLM-1, SLM-2 was essential for interaction with KIF5C in the yeast two-hybrid assay. In addition, glutathione S-transferase (GST) pull-downs showed that SAM68, SLM-1, and SLM-2 specifically interacted to Kinesin-I complex. An antibody to SAM68 specifically co-immunoprecipitated SAM68 associated with KIF5s and coprecipitated with a specific set of mRNA. These results suggest that Kinesin-I motor protein transports RNA-associated protein complex in cells.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.1
• /
• pp.97-101
• /
• 2016

ZnO has nanostructured material because of unique properties suitable for various applications. Amongst all chemical and physics methods of synthesis of ZnO nanostructure, the hydrothermal method is attractive for its simplicity and environment friendly condition. Nanostructure ZnO thin films have been successfully synthesized on fluorine doped tin oxide (FTO) substrate using hydrothermal method. A possible growth mechanism of the various nanostructures ZnO is discussed in schematics. The prepared materials were characterized by standard analytical techniques, i.e., X-ray diffraction (XRD) and Field-emission scanning electron microscopy (SEM). The XRD study showed that the obtained ZnO nanostructure thin films are in crystalline nature with hexagonal wurtzite phase. The SEM image shows substrate surface covered with nanostructure ZnO nanrod. The UV-vis absorption spectrum of the synthesized nanostructure ZnO shows a strong excitonic absorption band at 365 nm which indicate formation nanostructure ZnO thin film. Photoluminescence spectra illustrated two emission peaks, with the first one at 424 nm due to the band edge emission of ZnO and the second broad peak centered around 500 nm possibly due to oxygen vacancies in nanostructure ZnO. The Raman measurements peaks observed at $325cm^{-1}$, $418cm^{-1}$, $518cm^{-1}$ and $584cm^{-1}$ indicated that nanostrusture ZnO thin film is high crystalline quality. We trust that nanostructure ZnO material can be effectively will be used as a highly active and stable phtocatalysis application.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.795-805
• /
• 2011

The research on the immersive media technology is actively being done with the emergence of immersive services using immersive media, especially in the broadcasting industry and with the increased market demand for it. The industry which produces, transmits, processes and services the immersive contents is commonly called Immersive Media Industry. Immersive Media Industry has recently received attention as next-generation strategic industry with its high marketability and its high possibility of market expansion through convergence with other industry such as education, health, advertisement, travel and public service industry. As other advanccd country such as the U.S., Japan and Europe buckle down to take the innitiative in the immersive media industry, Korea government also begins to make plan to promote the immersive media industry. As above, immersive media industry is a cutting-edge convergence industry which embraces broadcasting, telecommunication and contents industry and it is rising as core growth engine industry. This article analyses the economic effects of immersive media industry through quantatitive method and evaluates the relations between the immersive media industry and the other related industries. As a result, the effect on production inducement of immersive media industry is 610.9 billion Korean Won; the effect on value-added inducement is 468.7 billion Korean Won; and it is measured that 3,258 job will be created by the immersive media industry.

• Cartoon and Animation Studies
• /
• s.36
• /
• pp.167-187
• /
• 2014

Animation-related films and game industries have been expanding their markets rapidly responding to sharply increasing public demand. The production processes of major studios are getting more and more specialized and detailed. Therefore, they feel burden to manage and maintain as the HR and physical sizes are getting greater. So, independent studios which perform partial processes of the works are increasing over North America and Europe. Specialized studios build previous functions and related business models. They are expanding their areas. Therefore, this study targeted studios specialized in digital concept art in free production step. The characteristics of such studios were analyzed. To this end, first definitions of digital concept art concepts and functional & artistic features of entire production, and their application to business were deliberated through documents and online. Based on the results, the features of 'concept art service', 'self-brand business/ communication', and 'education service' were drawn. Second, based on it, targeting three con cept art studios such as Atomhawk (UK), FengZhu Design (Singapore), and Studio Gage (Korea), case research was done. Comparative analysis for the cases was conducted. It turned out that concept art studio s lead new market demand through active business strategies such as related contents development, marketing, etc. based on specialization. This research is significant to understand global trend of newly establishing specialized studios market and suggest reference data to improve prospective domestic specialized studios competitiveness.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.5
• /
• pp.1213-1218
• /
• 2013

In this study, Ga-doped ZnO (GZO) thin films were fabricated on transparent sapphire substrate by RF magnetron sputtering method and then investigated the effect of various substrate temperature on the electrical, optical properties and characteristic of crystallization of the GZO thin films. The electrical property indicated that the lowest resistivity ($4.18{\times}10^{-4}{\Omega}cm$), the highest carrier concentration ($6.77{\times}10^{20}cm^{-3}$) and Hall mobility ($22cm^2/Vs$) were obtained in the GZO thin film fabricated at $300^{\circ}C$. And for this condition, the highest c-axis orientation and (002) diffraction peak which exhibits a FWHM of $0.34^{\circ}$ were obtained. From the results of AFM measurements, it is known that the highest crystallinity is observed at $300^{\circ}C$. The transmittance spectrum in the visible range was approximately 80 % regardless of substrate temperature. The optical band-gap showed the blue-shift as increasing the substrate temperature to $300^{\circ}C$, and they are all larger than the band gap of bulk ZnO (3.3 eV). It can be explained by the Burstein-Moss effect.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.48-52
• /
• 2008

According to extremely industrial growth, gas facilities, equipments and chemical plants are gradually increased due to incremental demands of annual amount of gases. The safety management of gases, however, is still far from their requirements. Methane, the principal ingredient of natural gas, is inflammable and explosive and is much used in factories and houses. Therefore, these gas safety management is essential. So, we, with a program of the gas safety management, hope to develop the detection system of methane gas leak using mid-infrared ray LED and PD with $3.2\;{\mu}m$. The cryogenic cooling device is indispensible at laser but needless at LED driven on the room temperature if manufacturing optical sensor with $3.2\;{\mu}m$. It, consequently, is not only possible to implement for subminiature and portable type but also able to speedily detect methane of extremely small quantities because the $CH_4$ absorption intensity at $3.2\;{\mu}m$ is stronger than that at $1.67\;{\mu}m$. Our objective of research is to prevent gas leak accidents from occurring previously and to minimize the extent of damage from them.

• The Journal of Engineering Research
• /
• v.5 no.1
• /
• pp.73-87
• /
• 2004

The synthesis and crystallization of amorphous calcium carbonate($CaCO_3$.$nH_2 O$) obtained from gas-liquid reaction between aqueous solution of calcium hydroxide and carbon dioxide at 15~$50^{\circ}C$ are investigated by electrical conductometry, XRD and TEM. The results are as follows: The initial reaction products prior to the formation of precipitated calcium carbonate is amorphous calcium carbonate. The electrical conductivity values in the slurry are decreased during the formation of amorphous calcium carbonate which covers particle surface of calcium hydroxide and retard the dissolution of calcium hydroxide into the solution. that amorphous calcium carbonate is unstable in the aqueous solution and crystallizes finally to calcite by the through-solution reaction. While amorphous calcium carbonate crystallizes into chain-like calcite, the conductivity values are recovered rapidly and the apparent viscosity of slurry containing higher concentration of calcium hydroxide increase. At below pH 9.5, chain-like calcite separates into individual particles to form precipitated calcium carbonate. The formation and synthetic temperature range of amorphous calcium carbonate is most suitable a primary decreasing step(a-step) at $15^{\circ}C$ in the electrical conductometry.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.103-103
• /
• 2000

강한 결정 방향 의존성과 낮은 항정계를 갖는 Bi4Ti3O12 강유전체 박막은 NDRO형 비휘발성 강유전체 메모리 분야에서 매우 유망한 재료이다. 이를 위해서는 실리콘 기판과의 계면조절과 실리콘 기판성에서 고품질의 강유전성 박막을 성장시키는 기술이 필수적이다. MOCVD에 의한 Bi4Ti3O12 의 증착에서는 Bi 성분의 강한 휘발 특성과 낮은 반응성으로 인하여 조성과 두께 등의 조절이 매우 어렵다. 따라서 화학기상증착의 기구를 이해하고 제어하는 기술이 양질의 박막을 얻는데 필수적이다. 본 연구에서는 유기금속 원료 TPB, TIP 과 산소를 이용하여 실리콘 기판위에 Bi4Ti3O12 강유전체 박막을 증착할 때, 증착 변수의 변화에 따른 박막의 증착 거동과 구조적, 전기적 특성을 연계하여 분석하였다. 특히 기판부착력이 낮고 휘발성이 강한 Bi의 특성으로 인한 문제를 개선하기 위하여 TIP원료를 주기적으로 공급, 중단을 반복하는 펄스주입법을 고안하여 그 효과를 살펴보았다. 실리콘 기판위에서 TiO2의 증착속도는 실험온도 영역에서 온도에 따라 변화하지 않는 전형적인 물질 전달에 의해 지배되는 양상을 나타내었다. 반면 Bi2O3 경우에는 50$0^{\circ}C$ 이상에서 급격하게 증착속도가 감소하는 특이한 경향을 나타내었으며 이는 Bi2O3의 높은 휘발성 때문일 것이다. Bi4Ti3O12 박막은 온도증가에 따라 증착속도가 증가한 후 $600^{\circ}C$ 이상에서 포화되는 경향을 보였다. 이로부터 실리콘 기판위에서의 Bi4Ti3O12 박막의 증착 모델을 제시하였다. Bi2O3에 비해 상대적으로 표면 부착력이 월등히 큰 TiO2가 우선적으로 실리콘 펴면에 형성된 후 TPB 유기금속 원료가 이 TiO2와 반응하는 과정으로 Bi4Ti3O12 박막이 증착된다. $600^{\circ}C$이상에서는 증착 변수들을 바꾸어도 물성이 변하지 않는 자기조절기능이 있음을 알 수 있었는데 이는 고온에서의 Bi2O3의 강한 휘발성 때문일 것이다. 실리콘 기판에서 층상 페로브스카이트 상은 58$0^{\circ}C$ 이상에서 형성되며, 매우 좁은 온도 변화에도 결정구조, 박막현상 및 성분이 크게 바뀌는 온도에 민감한 증착거동이 관찰되었다. 증착 모델에서 예견되는 Bi의 불리함을 개선하기 위해 펄스주입법을 실시한 경우 Bi의 성분량이 증가되었고 결정성이 향상되었다. 이로부터 펄스주입법이 박막내에 부족하기 쉬운 Bi를 보충하여 박막의 특성을 개선함을 확인하였다. Bi4Ti3O12 박막의 증착온도에 따른 누설전류 특성 측정 결과 증착온도가 감소할수록 누설전류가 감소함을 알 수 있었고 펄스주입법이 연속주입법보다 더 낮은 누설전류를 보임을 알았다. 펄스주입법의 경우 -2.5V 인가 시의 누설전류는 7.4$\times$10-8A/cm2에서 1.3$\times$10+7A/cm2의 매우 우수한 값을 가졌다. 연속 주입법에 의해 증착된 박막은 C-V 측정 결과 강유전성 이력이 나타나지 않았으나, $600^{\circ}C$ 이상에서 펄스주입법에 의해 증착된 박박은 강유전성 이력을 나타내었다.