• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.1
• /
• pp.77-83
• /
• 2001

To product the map by terrestrial photogrammetry method, a few rather nuisance stereo image acquiring processing and plot using expensive analytical instruments have to be performed. In this study, plot was made by acquiring and rectification image using simple method rather than above it. For this, geometry rectification system was constructed for the generation of single ortho-image analysis. and these ortho-images of architecture were made and analysed by appling various warping methods. As a result, the performance of single image analysis could be estimated, and it is expected that the application of this is possible to various non-topographic photogrammetry.

• Journal of Korean Society for Geospatial Information Science
• /
• v.20 no.3
• /
• pp.41-48
• /
• 2012

Using multi-sensor or multi-temporal high resolution satellite images together is essential for efficient applications in remote sensing area. The purpose of this paper is to estimate geometric difference of translations between high-resolution optical and SAR images automatically. The geometric and radiometric pre-processing steps were fulfilled to calculate the similarity between optical and SAR images by using Mutual Information method. The coarsest-level pyramid images of each sensor constructed by gaussian pyramid method were generated to estimate the initial translation difference of the x, y directions for calculation efficiency. The precise geometric difference of translations was able to be estimated by applying this method from coarsest-level pyramid image to original image in order. Yet even when considered only translation between optical and SAR images, the proposed method showed RMSE lower than 5m in all study sites.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.327-343
• /
• 2020

This study proposes a method to improve the geometric quality of KOMPSAT (Korea Multi-Purpose Satellite)-3/3A Level 1R imagery, particularly for efficient disaster damage analysis. The proposed method applies a novel grid-based SIFT (Scale Invariant Feature Transform) method to the Planetscope ortho-imagery, which solves the inherent limitations in acquiring appropriate optical satellite imagery over disaster areas, and the KOMPSAT-3/3A imagery to extract GCPs (Ground Control Points) required for the RPC (Rational Polynomial Coefficient) bias compensation. In order to validate its effectiveness, the proposed method was applied to the KOMPSAT-3 multispectral image of Gangnueng which includes the April 2019 wildfire, and the KOMPSAT-3A image of Daejeon, which was additionally selected in consideration of the diverse land cover types. The proposed method improved the geometric quality of KOMPSAT-3/3A images by reducing the positioning errors(RMSE: Root Mean Square Error) of the two images from 6.62 pixels to 1.25 pixels for KOMPSAT-3, and from 7.03 pixels to 1.66 pixels for KOMPSAT-3A. Through a visual comparison of the post-disaster KOMPSAT-3 ortho-image of Gangneung and the pre-disaster Planetscope ortho-image, the result showed appropriate geometric quality for wildfire damage analysis. This paper demonstrated the possibility of using Planetscope ortho-images as an alternative to obtain the GCPs for geometric calibration. Furthermore, the proposed method can be applied to various KOMPSAT-3/3A research studies where Planetscope ortho-images can be provided.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.145-147
• /
• 2018

다수의 일반 카메라로 촬영한 영상들로 360도 영상을 제작하는 경우 다수의 영상 간 동일한 영역을 찾고 기하학 보정을 위한 영상 스티칭 기술이 필요하다. 영상 스티칭 기술은 여러 영상에서 추출한 특징점들의 유사도를 비교하여 영상들을 이어 붙여 큰 하나의 영상으로 만드는 것이다. 본 논문에서는 비콘이 부착된 공연장을 가정하여, 비콘을 통해서 촬영자의 위치를 대략적으로 파악하고, 사용자가 어플리케이션을 통하여 전송한 영상과 영상의 방위각, FOV(Field Of View)들을 이용하여 실내에서 촬영된 영상들을 스티칭 대상 영상들로 필터링하는 방법을 제안한다.

• Korean Journal of Remote Sensing
• /
• v.30 no.6
• /
• pp.769-776
• /
• 2014

It is necessary to detect the feature points existing simultaneously in both images and then find the corresponding relationship between the detected feature points. We propose a new feature detector based on geometric mean of two eigenvalues of gradient matrix which is able to measure the change of pixel intensities. The corner response of the proposed detector is proportional to the geometric mean and also the difference of two eigenvalues in the case of same geometric mean. We analyzed the localization error of the feature detection using aerial image and artificial image with various types of corners. The localization error of the proposed detector was smaller than that of the typical corner detector, Harris detector.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.36-36
• /
• 2021

최근 기후변화로 인한 집중홍우 등으로 홍수 등 재난이 증가하고 있으며, 이를 과학적으로 조사하고 분석하기에는 공간적으로 범위가 넓다. 특히, 미계측유역은 자료를 수집하고 정량적으로 분석 및 예측하는 데에는 한계가 많은 실정이다. 따라서 본 연구에서는 위성영상 자료를 활용하여, 하천폭, 수면경사, 수위 등 자료를 추출하고, 이를 유량조사를 수행한 지점의 자료와 비교하여 수리 기하적 상관성을 분석하였다. 특히, 하도특성을 고려하여 중·하류로 구분하고 유량과 수리기하 학의 관계를 분석하였다. 위성영상 중 취득이 용이한 Sentinel 자료를 선별하여 수리특성인자를 추출하였다. 영상자료의 해상도가 20 m이며, 자료의 한계에 따른 하천폭, 경사, 수위에 대한 유효 기준을 제시하고 경사가 완만하고 하폭이 넓은 대하천에 적용하였다. 그리고, 하천수리인자 특성을 입력변수로 하는 유량을 추정하기 위한 회귀모형을 구축하고, 모의유량과 실측유량을 비교하여 그 적용성을 평가하였다. 개발된 모형은 규모가 유사한 시험유역을 미계측 유역으로 간주하여 평균제곱근오차(RMSE) 와 평균절대오차(MAE)를 이용하여 정확도를 추정하였다. 본 연구를 통해 주요하천의 수리기하 특성을 통계화하고 유량과의 특성을 도출하여 국내하천의 특성을 범주화 할 수 있었고, 미계측 유역에서의 유량을 원격탐사와 같은 간접적인 방법을 통해 추정하고 적용할 수 있을 것으로 기대된다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.622-624
• /
• 2001

영상기반 렌더링(image-based rendering) 기법은 전통적인 컴퓨터 그래픽 기법과는 다르게 장면 생성 시 복잡한 3차원 정보들을 2차원 영상들의 조합으로 표현하여 렌더링 하는 방법이다. 그 중에서 원통맵을 이용한 렌더링은 파노라마 영상을 이요해 관찰자에게 보다 빠르게 실시간으로 장면을 렌더링하여 보여준다. 이러한 영상기반 렌더링에서도 ㅅㄹ제감을 보다 더 높이기 위해서는 빛과 빛에 의해 생기는 그림자, 하이라이트의 역할이 매우 중요하다. 하지만 파노라마 영상의 경우 미리 촬영된 영상들을 사용하므로 실시간으로 동적인 광원의 변화와 그로인한 그림자와 하이라이트 부분을 표현하기 위해서는 변화된 영상들을 재촬영하여 새로운 파노라마 영상을 제작해야 한다. 본 논문에서는 OpenGL을 이용하여 실내 공간을 표현한 원통 영상 기반 환경 맵에서 광원의 위치변화에 의해 가상 하이라이트 (virtual highlight)의 움직임을 파노라마 이미지의 재 촬영 없이 몇 가지 기하학 정보만으로 계산하여 표현해 주는 방법을 제안한다.

• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.431-444
• /
• 2014

As applications of spaceborne SAR imagery are extended, there are increased demands for accurate registrations for better understanding and fusion of radar images. It becomes common to adopt multi-resolution SAR images to apply for wide area reconnaissance. Geometric correction of the SAR images can be performed by using satellite orbit and attitude information. However, the inherent errors of the SAR sensor's attitude and ground geographical data tend to cause geometric errors in the produced SAR image. These errors should be corrected when the SAR images are applied for multi-temporal analysis, change detection applications and image fusion with other sensor images. The undesirable ground registration errors can be corrected with respect to the true ground control points in order to produce complete SAR products. Speeded Up Robust Feature (SURF) technique is an efficient algorithm to extract ground control points from images but is considered to be inappropriate to apply to SAR images due to high speckle noises. In this paper, an attempt is made to apply SURF algorithm to SAR images for image registration and fusion. Matched points are extracted with respect to the varying parameters of Hessian and SURF matching thresholds, and the performance is analyzed by measuring the imaging matching accuracies. A number of performance measures concerning image registration are suggested to validate the use of SURF for spaceborne SAR images. Various simulations methodologies are suggested the validate the use of SURF for the geometric correction and image registrations and it is shown that a good choice of input parameters to the SURF algorithm should be made to apply for the spaceborne SAR images of moderate resolutions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.667-675
• /
• 2011

In this paper, we propose an automatic image-to-image registration between high resolution multi-sensor images. To do this, TerraSAR-X image was shifted according to the initial translation differences of the x and y directions between images estimated using Mutual Information method. After that, the Canny edge operator was applied to both images to extract linear features. These features were used to design a cost function that finds matching points based on the similarities of their locations and gradient orientations. For extracting large number of evenly distributed matching points, only one point within each regular grid constructed throughout the image was extracted to the final matching point pair. The model, which combined the piecewise linear function with the global affine transformation, was applied to increase the accuracy of the geometric correction, and the proposed method showed RMSE lower than 5m in all study sites.

• Journal of the Korea Computer Graphics Society
• /
• v.7 no.3
• /
• pp.9-18
• /
• 2001

Feature detection is important in various mesh processing techniques, such as mesh editing, mesh morphing, mesh compression, and mesh signal processing. In this paper, we propose a geometric snake as an interactive tool for feature detection on a 3D triangular mesh. A geometric snake is an extension of an image snake, which is an active contour model that slithers from its initial position specified by the user to a nearby feature while minimizing an energy functional. To constrain the movement of a geometric snake onto the surface of a mesh, we use the parameterization of the surrounding region of a geometric snake. Although the definition of a feature may vary among applications, we use the normal changes of faces to detect features on a mesh.