• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.203-216
• /
• 2004

Recent advances in video coding technology have resulted in rapid growth of application in mobile communication, With this explosive growth reliable transmission and error resilient technique become increasingly necessary to offer high quality multimedia service. In this paper, we present the result of our investigation on the error resilient performance evaluation of the MPEG-4 simple profile under the H.324/M and the H.264/AVC baseline under the IP packet networks. Especially, we have tested error resilient tools of MPEG-4 simple profile such as resynchronization marker insertion, data partitioning, and of H.264/AVC baseline such as the flexible macroblock ordering (FMO) scheme. The objective quality of decoded video is measured in terms of rate and PSNR under various random bit and burst error conditions.

• Journal of Digital Contents Society
• /
• v.8 no.4
• /
• pp.441-449
• /
• 2007

In video coding, motion estimation is a process to estimate the pixel of the current frame from the reference frame, which affects directly the predictive quality and the encoding time. This paper is related to AHHS(Adaptive Hierarchical Hexagon Search) using spatio-temporal motion activity for fast motion estimation. The proposed method defines the spatio-temporal motion activity of the current macroblock using the motion vectors of its spatio-temporally adjacent macroblocks, and then conventional AHS(Adaptive Hexagon Search) is performed if the spatio-temporal motion activity is lower, otherwise, hierarchical hexagon search is performed on a multi-layered hierarchical space constructed by multiple sub-images with low frequency in wavelet transform. In the paper, based on computer simulation results for multiple video sequences with different motion characteristics, the performance of the proposed method was analysed and assessed in terms of the predictive quality and the computational time. Experimental results indicate that the proposed method is both suitable for (quasi-) stationary and large motion searches. The proposed method could keep the merit of the adaptive hexagon search capable of fast estimating motion vectors and also adaptively reduce the local minima occurred in the video sequences with higher spatio-temporal motion activity.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.329-335
• /
• 2010

Digital imaging detectors can use a variety of detection materials to convert X-ray radiation either to light or directly to electron charge. Many detectors such as amorphous silicon flat panels, CCDs, and CMOS photodiode arrays incorporate a scintillator screen to convert x-ray to light. The digital radiography systems based on semiconductor detectors, commonly referred to as flat panel detectors, are gaining popularity in the clinical & hospital. The X-ray detectors are described between a-Silicon based indirect type and a-Selenium based direct type. The DRS of detectors is used to convert the x-ray to electron hole pairs. Image processing is described by specific image features: Latitude compression, Contrast enhancement, Edge enhancement, Look up table, Noise suppression. The image features are tuned independently. The final enhancement result is a combination of all image features. The parameters are altered by using specific image features in the different several hospitals. The image in a radiological report consists of two image evaluation processes: Clinical image parameters and MTF is a descriptor of the spatial resolution of a digital imaging system. We used the edge test phantom and exposure procedure described in the IEC 61267 to obtain an edge spread function from which the MTF is calculated. We can compare image in the processing parameters to change between original and processed image data. The angle of the edge with respect to the axes of detector was varied in order to determine the MTF as a function of direction. Each MTF is integrated within the spatial resolution interval of 1.35-11.70 cycles/mm at the 50% MTF point. Each image enhancement parameters consists of edge, frequency, contrast, LUT, noise, sensitometry curve, threshold level, windows. The digital device is also shown to have good uniformity of MTF and image parameters across its modality. The measurements reported here represent a comprehensive evaluation of digital radiography system designed for use in the DRS. The results indicate that the parameter enables very good image quality in the digital radiography. Of course, the quality of image from a parameter is determined by other digital devices in addition to the proper clinical image.

• Journal of the Korean Society of Radiology
• /
• v.6 no.5
• /
• pp.357-363
• /
• 2012

The purpose of this study on head computed tomography scan corporate reorganization adaptive iteration algorithm using the statistical noise, and quality assessment, reduction of dose was evaluated. Head CT examinations do not apply ASIR group [A group], ASIR 50 applies a group [B group] were divided into examinations. B group of each 46.9 %, 48.2 %, 43.2 %, and 47.9 % the measured in the phantom research result of measurement of CT noise average were reduced more than A group in the central part (A) and peripheral unit (B, C, D). CT number was measured with the quantitive analytical method in the display-image quality evaluation and about noise was analyze. There was A group and difference which the image noise notes statistically between B. And A group was high so that the image noise could note than B group (31.87 HUs, 31.78 HUs, 26.6 HUs, 30.42 HU P<0.05). The score of the observer 1 of A group evaluated 73.17 on 74.2 at the result 80 half tone dot of evaluating by the qualitative evaluation method of the image by the bean curd clinical image evaluation table. And the score of the observer 1 of B group evaluated 71.77 on 72.47. There was no difference (P>0.05) noted statistically. And the inappropriate image was shown to the diagnosis. As to the exposure dose, by examination by applying ASIR 50 % there was no decline in quality of the image, 47.6 % could reduce the radiation dose. In conclusion, if ASIR is applied to the clinical part, it is considered with the dose written much more that examination is possible. And when examination, it is considered that it becomes the positive factor when the examiner determines.

• Journal of the Korean Society of Radiology
• /
• v.17 no.1
• /
• pp.1-9
• /
• 2023

For optimal image quality of computer tomography angiography (CTA), different iodine concentrations and scan parameters were applied to quantitatively evaluate the image quality characteristics of filtered back projection (FBP), hybrid-iterative reconstruction (hybrid-IR), and deep learning reconstruction (DLR). A 320-row-detector CT scanner scanned a phantom with various iodine concentrations (1.2, 2.9, 4.9, 6.9, 10.4, 14.3, 18.4, and 25.9 mg/mL) located at the edge of a cylindrical water phantom with a diameter of 19 cm. Data obtained using each reconstruction technique was analyzed through noise, coefficient of variation (COV), and root mean square error (RMSE). As the iodine concentration increased, the CT number value increased, but the noise change did not show any special characteristics. COV decreased with increasing iodine concentration for FBP, adaptive iterative dose reduction (AIDR) 3D, and advanced intelligent clear-IQ engine (AiCE) at various tube voltages and tube currents. In addition, when the iodine concentration was low, there was a slight difference in COV between the reconstitution techniques, but there was little difference as the iodine concentration increased. AiCE showed the characteristic that RMSE decreased as the iodine concentration increased but rather increased after a specific concentration (4.9 mg/mL). Therefore, the user will have to consider the characteristics of scan parameters such as tube current and tube voltage as well as iodine concentration according to the reconstruction technique for optimal CTA image acquisition.

• The KIPS Transactions:PartB
• /
• v.11B no.7 s.96
• /
• pp.779-784
• /
• 2004

In this paper, we have proposed an image contrast control method using brightness preserving on the FPD(Flat Panel Display). The proposed method can be easily applied to the FPD required real-time processing, since hardware complexity is greatly reduced using linear approximation method of CDF(Cumulative Density Function). For effective processing of the proposed algorithm, we have utilized the sample value of CDF and Barrel Shift. Visual test and standard deviation of their histogram have been introduced to evaluate the resultant output images of the pro-posed method and the original ones.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.11a
• /
• pp.218-220
• /
• 2017

Recently, stitching techniques are used for obtaining wide FOV, e.g., panorama contents, from normal cameras. Despite many proposed algorithms, the no objective quality evaluation method is developed, so the comparison of algorithms are performed only in subjective way. The paper proposes a 'Delaunay-triangulation based objective assessment method' for evaluating the geometric and photometric distortions of stitched or warped images. The reference and target images are segmented by Delaunay-triangulation based on matched points between two images, the average Euclidian distance is used for geometric distortion measure, and the average or histogram of PSNR for photometric measure. We shows preliminary results with several test images and stitching methods for demonstrate the benefits and application.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.868-870
• /
• 2005

스크래치는 오래된 필름에서 가장 많이 나타나는 손상 요인이다. 고화질의 멀티미디어 서비스를 제공하기 위해서는 이러한 스크래치들은 반드시 검출 및 복원되어야 한다. 이러한 중요성 때문에 지금까지 많은 복원 알고리즘이 개발되어 왔으나, 스크래치 영역의 자동검출에 대한 연구는 거의 이루어지지 않은 실정이다. 따라서 본 논문에서는 자동으로 스크래치영역을 추출할 수 있는 신경망 기반의 검출 방법을 제안한다. 다층 퍼셉트론 (Multi-layer perceptron: MLP)을 이용하여 스크래치영역과 비 스크래치영역을 구분하는데, 이 MLP는 다양한 크기의 스크래치를 검출하기 위해 다양한 크기의 입력 영상에 대해 적용된다. 제안된 방법의 평가를 위해 principal/ secondary 스크래치, alone/not-alone 스크래치, moving/static 스크래치등의 다양한 종류의 스크래치를 가진 영상에 대해 실험이 이루어졌고, 그 결과 제안된 방법의 강건함과 효율성을 입증되었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.247-253
• /
• 2013

The purpose is a comparative evaluation in the DR System according to the dosimetry and image quality of the quantitative and objective via Direct digital radiography, Indirect digital radiography, Image intensifier (Charge Coupled Device type) digital radiography. The experimental method used rando phantom and measured the entrance surface dose. And through using the measured entrance surface dose and then using the PCXMC program were evaluated risk due to irradiation and the effective dose. SNR and NPS and CNR were measured and analyzed by using 21cm acryl phantom. Significance of measured value was evaluated by statistics method. Entrance surface dose, major organ dose, effective dose all of them were measured the lowest rated in direct DR when it is on the basis of direct DR dose, high-dose ratio were measured in I.I DR approximately 1.3 times, indirect DR approximately 2.4 times. Risk in accordance with radiation also was measured same as dose ratio. On the conclusion that SNR measurement result based on direct DR SNR measurements, low-SNR ratio were measured in I.I DR approximately 7.25 times, indirect DR approximately 1.48 times. On the conclusion that CNR measurement result based on direct DR CNR measurements, high-dose ratio were measured in I.I type DR approximately 1.16 tims and low-dose ratio were measured in indirect DR approximately 0.87 times. Therefore Direct DR system using a-selenium sensing element to detect x-ray photon is thought effectively at the examination such as infant to sensitive irradiation and the genital gland. Because quality image is built by low dose. Also when it is necessary that image test requiring many diagnosis information, indirect DR system is thought effectively.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.481-487
• /
• 2019

Based on the scan conditions and algorithms that are generally applied during examinations during head CT examinations, the results of dose reduction through the application of algorithm changes were investigated through experiments. As a result, the dose reduction effect was more meaningful for the change of perfusion than for the tube voltage, and the quality evaluation using the brain phantom was relatively less reduced when the dose was reduced after the application of the Bone algorithm, especially for the application of the Bone algorithm, and the deviation of the mean CT number or Pixel value was measured relatively significantly. In other words, the conditions under which dose was reduced and quality was maintained to reduce the patient's exposure dose and obtain images of the same quality were obtained with the application of the Smooth algorithm and the resulting values of 120 kVp, 160 mA. At this point, doses were reduced by about 28%, and the mean CT number or Pixel value was also measured with relatively little error. If the results are applied to patients who visit the hospital for examination or follow-up after applying various algorithms and follow up scan conditions, the results are considered to be very useful in reducing patient exposure dose.