• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.438-443
• /
• 2002

본 연구는 수도작에서 토양과 식물체의 분광반사특성과 영상처리를 이용한 기계시각 잡초검출 센서를 개발하기 위한 기초연구로서 분류하고자 하는 대상체들의 분광반사율을 조사하여 주요한 파장을 선정하고 선정된 파장을 이용한 판별분석을 통해 각 대상체에 대한 분류 정확도를 중심으로 잡초검출 가능성을 조사하기 위하여 수행하였으며, 실험으로부터 얻은 결론은 다음과 같다. 1. 토양과 식물체를 구분하는데 효과적인 파장은 마른 토양의 경우 680 nm, 배수 토양에 있어서는 810 nm로 선정하였고, 토양을 배제한 후 벼와 잡초를 구분하기에 효과적인 파장은 580, 680 nm로 선정하였다. 2. 토양과 식물체를 구분하기 위한 판별분석 결과 2가지 토양상태 모두 식물체와 완전히 구분 가능한 것으로 나타났다. 벼와 잡초를 구분하기 위한 실험에서, 벼는 98%의 분류정확도로 구분이 가능하였고, 잡초는 83%의 분류정확도로 구분이 되는 것으로 나타났다. 따라서 차후 분광학적 원리를 이용한 센서를 제작할 때 본 연구에서 선택한 주요 파장과 판별함수를 이용하여 장치를 구성하고 알고리즘을 제작한다면 벼, 잡초, 토양을 효과적으로 구분이 가능할 것으로 판단되었다. 3. 컬러 CCD 카메라를 사용하는 경우에 있어 식물체와 토양을 구분하기 위해 3 종의 파장 중 630 nm 파장만의 이용을 고려하여 그 분류성능을 분석한 결과, 식물체와 토양은 소수의 관측치를 제외하고 완전히 구분이 가능했고, 벼와 잡초를 구분한 결과에서는 비교적 높은 분류능력을 가진 것으로 나타나 차후 컬러 CCD 카메라를 이용하여 장치를 구성하는데 좋은 기초가 될 것으로 판단된다. 배양체의 접종작업은 모든 배양실이 인력에 의존하였으며, 배양체를 배지와 분리하여 불필요한 부분을 제거하고 배양작물에 따라 생육정도를 2~3등급으로 구분하여 배양용기의 배지 위에 치상하는 과정으로 수행되었으며, 작업능률은 호접란의 경우 배양병에 25본을 접종하는데 시간당 6병, 심비디움은 원형 플라스크에 25본을 접종하는데 시간당 10병 정도였다. 바. 식물체의 대량증식에 사용되는 플라스크, 배양병, PE용기 등 배양용기의 세척작업은 농원의 1개배양실에서 간이식 세척기, 이 외의 9개배양실은 모두 물에 담겨 두었다가 세제와 브러쉬 등을 사용하여 인력으로 세척하고 있어 생력화 기술개발이 요구되었다.도가 빠를수록 건조속도가 빨라졌으며, 건조에너지도 1,334kcal/kg.water로 비슷하게 소요되었다. 마. 시험구와 대비구의 건감률은 시험구에서 1.08~1.36w.b./h로 나타나 대비구보다 약 9.9~18.3%가 높게 나타났고, 건조에너지는 10.2~14.6%가 절감되었다. 발아율은 열풍온도가 낮을수록 높게 나타났고 시험구가 대비구보다 발아율이 낮게 나타났으며, 동할률 증가량도 원적외선.열풍 복합건조방법이 높게 나타나 이것은 곡물 표면에 원적외선 방사에의한 복사열이 전달되어 열장해를 받았기 때문으로 판단되며, 금후 더 연구하여 적정 열풍온도 및 방사체 크기를 구명해야 할 것이다.으로 보여진다 따라서 옻나무 유래 F는 포유동물의 생식기능에 중요하게 작용하는 것으로 사료된다.된다.정량 분석한 결과이다. 시편의 조성은 33.6 at% U, 66.4 at% O의 결과를 얻었다. 산화물 핵연료의 표면 관찰 및 정량 분석 시험시 시편 표면을

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.75-78
• /
• 2003

MPEG-4 표준은 저작자가 정지영상, 텍스트, 2D/3D 그래픽스, 오디오, 심지어 임의형의 비디오 등과 같이 다양한 형태의 객체들을 개별적으로 구성하고 이들을 시/공간자적으로 다루기 용이하게 해 준다. 이와 같은 객체 기반 코딩 특성에 의해서 대화형 방송 콘텐츠를 제작하는데 가장 유용한 방식으로 고려할 수 있다. 피러나, 콘텐츠의 제작, 전송, 소비 관전에서 고려해 달 때, 콘텐츠 제작자 또는 저작권자의 보호 및 관리가 필요하게 되었다. 이에 따라 최근에는 OPIMA (Open Platform Initiative for Multimedia Access), SDMI (Secure Digital Music Initiative) and MPEG(Moving Picture Expert Group) OPIMATfMr(Intellectual Property Management & Protection)와 같은 국제 표준 단체들이 콘텐츠 보호 및 관리에 대한 관심을 가지게 되었다. 특히, MPEG의 경우에 MPEG-4 IPMP를 표준화하여 디지털 콘텐츠와 저작권에 대한 보호를 체계적이고 효과적으로 다루는 연구를 가장 활발히 해오고 있다. 이 논문에서 우리는 MPEG-4 콘텐츠 저작자가 MPEG-4 규격에 맞게 보호화 된 객체 기반 방송용 콘텐츠를 쉽고 편리하게 제작학 수 있도록 하기 위한 MPEG씨 콘텐츠 및 저자권 보호를 위한 MPEG-4 IPMP 저작 도구를 제안하고자 한다. 제안한 MPEG-4 콘텐츠 및 저작권 보호 저작 도구는 저작자에게 친근한 사용자 인터페이스를 제공하여 편집 및 수정이 용이한 텍스트 포맷인 IPMP회된 XMT(extensible Mpeg-4 Textual format) 파일을 생성한다. 또한, 콘텐츠 전송 및 저장의 효율성을 위해 이진 포멧인 IPMP화된 MP4 파일을 생성할 수 있다.으로써, 에러 이미지가 가지고 있는 엔트로피에 좀 근접하게 코딩을 할 수 있게 되었다. 이 방법은 실제로 Arithmetic Coder를 이용하는 다른 압축 방법에 그리고 적용할 수 있다. 실험 결과 압축효율은 JPEG-LS보다 약 $5\%$의 압축 성능 개선이 있었으며, CALIC과는 대등한 압축률을 보이며, 부호화/복호화 속도는 CALIC보다 우수한 것으로 나타났다.우 $23.87\%$($18.00\~30.91\%$), 갑폭 $23.99\%$($17.82\~30.48\%$), 체중 $91.51\%$($58.86\~129.14\%$)이였으며 성장율은 사육 온도구간별 차는 없었다.20 km 까지의 지점들(지점 2에서 지점 6)에서 매우 높은 값을 보이며 이는 조석작용으로 해수와 담수가 강제혼합되면서 표층퇴적물이 재부유하기 때문이라고 판단된다. 영양염류는 월별로 다소의 차이는 있으나, 대체적으로 지점 1과 2에서 가장 낮고, 상류로 갈수록 점차 증가하며 지점 7 상류역이 하류역에 비해 높은 농도이다. 월별로는 7월에 규산염, 용존무기태질소 및 암모니아의 농도가 가장 높은 반면에 용존산소포화도는 가장 낮다. 그러나 지점 14 상류역에서는 5월에 측정한 용존무기태질소, 암모니아, 인산염 및 COD 값이 7월보다 다소 높거나 비슷하다. 한편 영양염류와 COD값은 대체적으로 8월에 가장 낮으나 용존산소포화도는 가장 높다.출조건은 $100^{\circ}C$에서 1분간의 고온단시간 추출이 적합하였다. 증가를 나타내었는데, 저장기간에 따른 물성의 변화는 숭어에 비하여 붕장어가 적었다.양식산은 aspartic acid 및 proline이 많았다. 또한 잉어는 천연산이

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.165-178
• /
• 2012

In most conventional video codecs, such as MPEG-2 and MPEG-4, inter coding is performed with the fixed motion vector resolution. When KTA software was developed, resolution for MVs can be selected in each slice. Although KTA codec uses a variety of resolutions for ME, the selected resolution is applied over the entire pixels in the slice and the statistical property of the local area is not considered. In this paper, we propose an adaptive decision scheme for motion vector resolution which depends on region, where MV search area is divided to multiple regions according to the distance from PMV. In each region, the assigned resolution is used to estimate MV. Each region supports different resolution for ME from other regions. The efficiency of the proposed scheme is affected from threshold values to divide the search area and the entropy coding method to encode the estimated MV. Simulation results with HM3.0 which is the reference software of HEVC show that the proposed scheme provides bit rate gains of 0.9%, 0.6%, and 2.9% in Random Access, Low Delay with B picture, and Low Delay with P picture structures, respectively.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.1
• /
• pp.35-41
• /
• 2020

Fast Fourier transform (FFT) processors have been widely used in various application such as communications, image, and biomedical signal processing. Especially, high-performance and low-power FFT processing is indispensable in OFDM-based communication systems. This paper presents a novel radix-26 FFT algorithm with low computational complexity and high hardware efficiency. Applying a 7-dimensional index mapping, the twiddle factor is decomposed and then radix-26 FFT algorithm is derived. The proposed algorithm has a simple twiddle factor sequence and a small number of complex multiplications, which can reduce the memory size for storing the twiddle factor. When the coefficient of twiddle factor is small, complex constant multipliers can be used efficiently instead of complex multipliers. Complex constant multipliers can be designed more efficiently using canonic signed digit (CSD) and common subexpression elimination (CSE) algorithm. An efficient complex constant multiplier design method for the twiddle factor multiplication used in the proposed radix-26 algorithm is proposed applying CSD and CSE algorithm. To evaluate performance of the previous and the proposed methods, 256-point single-path delay feedback (SDF) FFT is designed and synthesized into FPGA. The proposed algorithm uses about 10% less hardware than the previous algorithm.

• Journal of KIISE:Software and Applications
• /
• v.30 no.12
• /
• pp.1228-1238
• /
• 2003

This paper presents a new and practical method based on computer vision for detecting the monitor position where the user is looking. In general, the user tends to move both his face and eyes in order to gaze at certain monitor position. Previous researches use only one wide view camera, which can capture a whole user's face. In such a case, the image resolution is too low and the fine movements of user's eye cannot be exactly detected. So, we implement the gaze detection system with dual camera systems(a wide and a narrow view camera). In order to locate the user's eye position accurately, the narrow view camera has the functionalities of auto focusing and auto panning/tilting based on the detected 3D facial feature positions from the wide view camera. In addition, we use dual R-LED illuminators in order to detect facial features and especially eye features. As experimental results, we can implement the real-time gaze detection system and the gaze position accuracy between the computed positions and the real ones is about 3.44 cm of RMS error.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.6
• /
• pp.307-312
• /
• 2016

Markerless tracking for augmented reality using Homography can augment virtual objects correctly and naturally on live view of real-world environment by using correct pose and direction of camera. The RANSAC algorithm is widely used for estimating Homography. CS-RANSAC algorithm is one of the novel algorithm which cooperates a constraint satisfaction problem(CSP) into RANSAC algorithm for increasing accuracy and decreasing processing time. However, CS-RANSAC algorithm can be degraded performance of calculating Homography that is caused by selecting feature points which estimate low accuracy Homography in the sampling step. In this paper, we propose feature point filtering method based on CS-RANSAC for efficient planar Homography estimating the proposed algorithm evaluate which feature points estimate high accuracy Homography for removing unnecessary feature point from the next sampling step using Symmetric Transfer Error to increase accuracy and decrease processing time. To evaluate our proposed method we have compared our algorithm with the bagic CS-RANSAC algorithm, and basic RANSAC algorithm in terms of processing time, error rate(Symmetric Transfer Error), and inlier rate. The experiment shows that the proposed method produces 5% decrease in processing time, 14% decrease in Symmetric Transfer Error, and higher accurate homography by comparing the basic CS-RANSAC algorithm.

• Journal of the Korean Society of Radiology
• /
• v.10 no.3
• /
• pp.215-222
• /
• 2016

X-ray mammography is the most effective method for the diagnosis of calcified lesions of various breast diseases. To reduce patient dose and to obtain optimal image required for diagnosis, the performance of the mammography system should be maintained continuously. Because the target (anode) angle of the X-ray tube is measured from the central X-ray, the effective angle can be slightly different in view of the position on the detector, which can result in degrading spatial resolution of the imaging within the field of view. In this study, we measured the MTF to examine spatial resolution for positions on the detector in the digital mammography system. For a tungsten wire of $50{\mu}m$ diameter, the highest spatial frequency was obtained. It meant that a wire diameter for measuring MTF through LSF should be small compared to the pixel size of the detector used in the mammography system. The spatial resolution showed slightly different performance according to positions on the detector. The center position gave the best spatial resolution and positions away from the center showed the degraded performance although the difference of the spatial resolution was small. The effective focal spot size of the full width at half maximum also showed similar result. It concluded that the slightly increase of the effective focal spot size gave the degradation of the spatial resolution for positions on the detector.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.2
• /
• pp.127-136
• /
• 2012

Many research of hand gesture recognition based on vision system have been conducted which enable user operate various electronic devices more easily. 3D position calculation and meaningful gesture classification from similar gestures should be executed to recognize hand gesture accurately. A simple and cost effective method of 3D position calculation and gesture spotting (a task to recognize meaningful gesture from other similar meaningless gestures) is described in this paper. 3D position is achieved by calculation of two cameras relative position through pan/tilt module and a marker regardless with the placed position. Fuzzy garbage model is proposed to provide a variable reference value to decide whether the user gesture is the command gesture or not. The reference is achieved from fuzzy command gesture model and fuzzy garbage model which returns the score that shows the degree of belonging to command gesture and garbage gesture respectively. Two-stage user adaptation is proposed that off-line (batch) adaptation for inter-personal difference and on-line (incremental) adaptation for intra-difference to enhance the performance. Experiment is conducted for 5 different users. The recognition rate of command (discriminate command gesture) is more than 95% when only one command like meaningless gesture exists and more than 85% when the command is mixed with many other similar gestures.

• KIPS Transactions on Software and Data Engineering
• /
• v.2 no.1
• /
• pp.55-64
• /
• 2013

Due to the popularization of digital high-performance capturing equipments and the emergence of powerful image-editing softwares, it is easy for anyone to make a high-quality counterfeit money. However, the probability of detecting a counterfeit money to the general public is extremely low. In this paper, we propose a counterfeit money detection algorithm using a general purpose scanner. This algorithm determines counterfeit money based on the different features in the printing process. After the non-local mean value is used to analyze the noises from each money, we extract statistical features from these noises by calculating a gray level co-occurrence matrix. Then, these features are applied to train and test the support vector machine classifier for identifying either original or counterfeit money. In the experiment, we use total 324 images of original money and counterfeit money. Also, we compare with noise features from previous researches using wiener filter and discrete wavelet transform. The accuracy of the algorithm for identifying counterfeit money was over 94%. Also, the accuracy for identifying the printing source was over 93%. The presented algorithm performs better than previous researches.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.681-692
• /
• 2019

In this paper, a hybrid deep learning model, called 2D convolution with bidirectional long short-term memory (2DCBLSTM), is presented that can effectively combine both spatial and temporal features for crop classification. In the proposed model, 2D convolution operators are first applied to extract spatial features of crops and the extracted spatial features are then used as inputs for a bidirectional LSTM model that can effectively process temporal features. To evaluate the classification performance of the proposed model, a case study of crop classification was carried out using multi-temporal unmanned aerial vehicle images acquired in Anbandegi, Korea. For comparison purposes, we applied conventional deep learning models including two-dimensional convolutional neural network (CNN) using spatial features, LSTM using temporal features, and three-dimensional CNN using spatio-temporal features. Through the impact analysis of hyper-parameters on the classification performance, the use of both spatial and temporal features greatly reduced misclassification patterns of crops and the proposed hybrid model showed the best classification accuracy, compared to the conventional deep learning models that considered either spatial features or temporal features. Therefore, it is expected that the proposed model can be effectively applied to crop classification owing to its ability to consider spatio-temporal features of crops.